REPAIR/ PAINTING OF CERTAIN STEEL FURNITURE OF BSO UNDER GE(MCTE) MHOW

Amount

Almirah steel large (Drg No FD-67 (M), FD-1031, 339 & 351)

Dismantling carefully and taking out old unserviceable legs from the Almirah steel large and supply and fixing of new legs all as shown on drawings made of 1 MM thick MS Sheet. Suitable to Almirah large steel and welded accordingly and applying two coats of spray painting internally and externally on legs with synthetic enamel paint to match the almirah and as directed by Engineer-in-Charge.

Removing of old UNSV handle from Almirah Large Steel without damaging the adjacent parts of Almirah and supply and fixing new steel chromium plated handle 150 MM long of approved quality and as directed by Engineer-in-Charge.

Removing of old UNSV lock from Almirah Large steel without damaging the adjacent parts of Almirah Steel and Supply and Fixing new MS lock 65 MM Make Harrison/Link (Including duplicate keys of stainless steel) of approved quality and as directed by Engineer-in-Charge.

Supply and Fixing cover made out of 1 MM thick MS Sheet made to size & shape as per drawing suitable for three way locking device and fixed with new suitable size of MS Screws to Almirah large steel and as directed by Engineer-in-Charge.

Dismantling carefully and taking out the old unservicable/damaged shelf of Almirah Large Steel and Supply and Fixing of new shelf made out of MS Sheet 1 MM thick bent to shape and welding the same properly in position and as directed by Engineer-in-Charge.

Dismantling carefully and taking out unservicable / Damaged steel door single leaf of Almirah large steel and supply and fixing new door single leaf made out of MS Sheet 1.25 MM thick made to size & shage as per drawing and applying two coats of spray painting internally and externally with synthetic enamel paint to match the existing Over a coat of red oxide paint and as directed by Engineer-in-charge.

Supply and Fixing 75mm x 75mm x 2mm thick MS Sheet made to shape duly welded to the bottom of existing legs of Almirah Large as directed by Engineer-in-Charge. The sheet shall be covered with 5mm thick hard rubber/PVC sheet of approved quality duly screwed with four numbers nut/bolts of suitable size at both ends of the legs.

Removing the existing paint internally and externally by sand paper and cleaning the surface and filling the putty and allowed to dry making smooth surface by rubbing with sand paper and applying one coat of spray painting internally and externally including internally all parts with OG /Grey/smoke grey off white as aplicable make: asian,berger,nerolack synthetic enamel paint and as directed by Engineer-in-Charge.

Almirah steel Medium (Drg No FD-243, FD- 350)

Dismandling carefully and taking out old unserviceable legs from the Almirah Med steel and supply and fixing of new legs all as shown on drawings made of 1 MM thick MS Sheet. Suitable to Almirah large steel and welded accordingly and applying two coats of spray painting internally and externally on legs with synthetic enamel paint to match the almirah and as directed by Engineer-in-Charge

All same as per item No 1.02 above but to Almirah Medium Steel.

All same as per item No 1.03 above but to Almirah Medium Steel.

All same as per item No 1.04 above but to Almirah Medium Steel.

All same as per item No 1.05 above but to Almirah Medium Steel.

All same as per item No 1.06 above but to Almirah Medium Steel.

All same as per item No 1.07 above but to Almirah Medium Steel.

Removing the existing paint internally and externally by sand paper and cleaning the surface and filling the putty and allowed to dry making smooth surface by rubbing with sand paper and applying one coat of spray painting internally and externally including internally all parts with OG /Grey/smoke grey off white as aplicable make: asian,berger,nerolack synthetic enamel paint and as directed by Engineer-in-Charge.

Bed Hard Steel OFFICER (Drg No FD/E6/MAP/8(R))

Removing unsv plywood from bed hard steel & supply & fixing new plywood 7' x 3' x 12mm all as shown on drawing and as directed by Engineer-in - Charge.

Removing unsv head board from bed hard steel & supply & fixing new head board made out 18mm prelaminated pareticle board exterior quality with teak wood beading all round as shown on drawing and as directed by Engineer-in - Charge.

Removing unsv foot board from bed hard steel & supply & fixing new foot board made out 18mm prelaminated pareticle board exterior quality with teak wood beading all round as shown on drawing and as directed by Engineer-in - Charge.

Preparation of old steel surface of bed hard steel and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enameled paint as directed by Engineer-in-Charge.

Chair Writing Steel (Drg No FD/E6/MAP/01)

Dismantiling care fully and taking out unsv arms and supply and fixing new arms all as shwon on drawing and as directed by Engineer-in-Charge.

Taking out unsv cloth and cushion from seat chair chair writing map and supply and fixing new cushion made out of 50mm thick foam of 40mm density including cutting and stiching and finally covering the entire foam with taperstry cloth. Shade and colour complete all as direced by Engr-in- Charge.

Taking out unsv cloth and cushion from back chair writing map and supply and fixing new cushion made out of 50mm thick foam of 40mm density including cutting and stiching and finally covering the entire foam with taperstry cloth. Shade and colour complete all as direced by Engr-in- Charge.

Note :- (i) Quoted rate is inclusive for two coats of painting with enamel black paint with frame structure. (ii) Tapestry cloth used shall not be less than Rs 120 per meter (iii) Quoted rate is inclusive for greesing of spring and revolving portion.

Locker steel (Drg No FD-257, FD-1038)

Dismantling carefully and taking out old unserviceable legs from the locker steel and supply and fixing of new legs all as shown on drawings made of 1 MM thick MS Sheet. Suitable to Locker steel and welded accordingly as directed by Engineer-in-Charge

Replacement of old existing broken/unservicable Hasp & Staple of locker steel with new Hasps and Staples of Size 75 MM X 40 MM x 3 MM stainless steel of approved.

All same as per item No 1.07 above but to locker Steel.

Table computer (Drg No FD/E6/MAP/03)

Removing old unsv existing table top from table computer map drg and supply and fixing of new table top with 18mm thick prelaminated particle board bonded size 3' x 2' onde side teak face and other side white lamination including all round teak wood boading of 4mm x 18mm size fixed complete all as specified and directed by Engineer-in-Charge.

Removing old unsv existing 4 Nos Teleshopic channel from table computer map drg and supply and fixing of new 4 Nos Teleshopic channel complete all as specified and directed by Engineer-in-Charge.

TABLE OFFICE OFFR STEEL (Drg No FD-84, FD-306 & 1003)

M & L for spot welding by Gas Welding of Broken / Damaged parts, legs and drawer of Table Officer Steel with standard workmanship to table office Officer W/O Damaging the other parts and applying a coat of synthetic enamel paint over a coat of Red Oxide primer on the welded portion and two coats spray painting with synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Removing UNSV lock of the table office Officer Steel from the drawer of table supply and fixing new brass lock with dup keys as directed by Engr-in-Charge.

Removing old existing table top from table office Officer steel and supply and fixing of new table Top with 18 MM thick pre laminated partical board bonded size 1680 x 760 MM. one side teak face and other side white lamination including all round teak wood beading of 4 MM x 18 MM size fixed and as directed by Engr-in-Charge.

TABLE OFFICE CLK STEEL (Drg No FD-84, FD-307, 38 & 1004)

M & L for spot welding by Gas Welding of Broken parts, legs and drawer of Table Office Clk Steel with standard workmanship to table office Clk W/O Damaging the other parts and applying a coat of synthetic enamel paint over a coat of Red Oxide primer on the welded portion and two coats spray painting with synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

All as per item No 7.02 but Table Office Clk Steel.

All as per item No 7.03 but top of table size 1370 X 610 x 760 MM completed.

TABLE 3' x 2' STEEL (Drg No FD-1007)

All as per item No 7.03 but table top size 900 X 600 X 760 MM Steel w/o drawer.

Removing the existing paint externally by sand paper and cleaning the surface applying one coat of spray painting externally including internally all parts with white paint as aplicable make: asian,berger,nerolack synthetic enamel paint and as directed by Engineer-in-Charge.

TEAPOY VERANDAH (Drg No FD-256/ (FD/E6/MAP/17))

Removing unserviceable/broken top of Teapoy Verandah and S&F new top made out of 18/19mm thick prelaminated particle board including 4mm thick 1st class hard wood teak edging around of table top complete all as specified and directed.

Removing the existing paint internally and externally by sand paper and cleaning the surface applying one coat of spray painting internally and externally including internally all parts with black paint as aplicable make: asian,berger,nerolack synthetic enamel paint and as directed by Engineer-in-Charge.

Bed Hard Steel JCO/OR's (Drg No CWE/M/TD/05/07,MAP)

Removing unsv plywood from bed hard steel & supply & fixing new plywood 7' x 3' x 12mm all as shown on drawing and as directed by Engir-in - Charge.

Preparation of old steel surface of bed hard steel and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enameled paint as directed by Engineer-in-Charge.

Chair Revolving/Chair computer (Drg No TP,Fd/E6/Map/12,)

Dismantiling care fully and taking out unsv arms and supply and fixing new arms all as shwon on drawing and as directed by Engineer-in-Charge.

Dismantiling care fully and taking out unsv Hydrollic piston and supply and fixing new Hydrollic piston all as shwon on drawing and as directed by Engineer-in-Charge.

Dismantiling care fully and taking out unsv Base frame and supply and fixing new base frame all as shwon on drawing and as directed by Engineer-in-Charge.

Dismantiling care fully and taking out unsv Wheels and supply and fixing new Wheels all as shwon on drawing and as directed by Engineer-in-Charge.

Dismantiling care fully and taking out unsv locking machine and supply and fixing new locking machine all as shwon on drawing and as directed by Engineer-in-Charge.

Taking out unsv cloth and cushion from seat chair revolving/computerand supply and fixing new cushion made out of 50mm thick foam of 40mm density including cutting and stiching and finally covering the entire foam with taperstry cloth. Shade and colour complete all as direced by Engr-in- Charge.

Taking out unsv cloth and cushion from back chair revolving/computer/chair writing map and supply and fixing new cushion made out of 50mm thick foam of 40mm density including cutting and stiching and finally covering the entire foam with taperstry cloth. Shade and colour complete all as direced by Engr-in- Charge.

Book case steel (Drg No FD-1028)

Removing of old UNSV /BKN Glass plain 5mm thick from book case steel damaging the adjacent parts of book case steel and supply and fixing new steel glass pain 5mm thick quality and as directed by Engineer-in-Charge

Removing of old UNSV handle from Almirah Large Steel without damaging the adjacent parts of Almirah and supply and fixing new steel chromium plated handle 150 MM long of approved quality and as directed by Engineer-in-Charge

Repairs to shelves/door include tinkering/denting, painting, welding, etc. all as shown, as specified & as directed

locks as per drg (make-Lico/Reena or equivalent)

Removing the existing paint internally and externally by sand paper and cleaning the surface and filling the putty and allowed to dry making smooth surface by rubbing with sand paper and applying one coat of spray painting internally and externally including internally all parts with OG gray, smoke gray, off white as aplicable synthetic enamel paint make : asian, berger , Nerolackand as directed.

Table centre glass top (Drg No CWE/M/F/2/2001)

Removing old unsv existing 12 mm thick dark coloured glass from Table Centre, tightening the stand of centre table with nuts and bolts and supply and fixing of new 12 mm thick dark coloured glass of approved best quality make complete all as specified and directed.

one coat synthetic enamel black paint make : asian, berger , Nerolack first quality brush painting to table computer complete all as directed

M/S chandra enterprises