GE 861 EWS-84/2024-25

Amount

Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 Soft/loose cm complete all as specified and directed by Engineer-in-Charge.

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified. Note : Punned thickness 18 cm will be measured and paid.

M&L for Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed by Engineer-in-Charge.

Supply, laying, jointing and testing in trenches, galvanized iron steel tubing Light grade 80 mm bore (ISI marked) including provision of all necessary steel fittings/ accessories complete all as specified and directed by Engineer-in-Charge.

S&F in connecting and testing change over switch 4 pole 415 volts on load of rating 100 Amp and including sheet enclosures complete all as specified and directed by Engineer-in-Charge.

Supply, installation, commissioning and testing of LT Outdoor type panel board (factory made CPRI approved ) not less than 120cm x 100cm x 45 cm (LXHXW) Floor mounted DOUBLE DOOR outdoor TYPE made out of CRCA sheet 3.15 mm thick dust proof, powder coated from both side, individual door, factory locking system with two side ventilation suitable for working on 415 volt AC supply including bus bar chamber and Aluminium bus bar of capacity 250 Amps rating for phase and neutral mounted on hygroscopic insulator fixed in a separate bus bar chamber separate compartment for incoming and outgoing feeder prewired with suitable size of copper conductor cable including fitted on 50x50x6mm angle iron channel with PCC (1:3:6) bedding upto a height of 45cm above ground level and 30cm foundation complete all as specified directed by Engr- in- and provision of lugs and bushing for housing the following:- (i) Aluminium bus bar 250 amps for phase & neutral-04 Nos (ii) MCCB 4P 100 Amps, 25 KA - 01 No.(Incoming) (iii) MCCB 4P 63 Amps, 36 KA - 01 No. (Out going) (iv) MCB DP-20Amp-5,MCB DP-32Amp-5,MCB-DP-40Amp-2No,MCB-TPN-63Amp-3No,MCB-TPN-32Amp-2 v)Panel hud Have Additional space along with suitable din rail for mounting of 10 nos, SP/SPN (v) Multi functional digital Voltmeter and ampere meter including suitable and appropriate CTs-01 Set (vi) Indicator lamp (LED R-Y-B)- 01 Set

Supply, installing, testing and commissionning of CPRI approved LT panel outdoor type of size minimum 120cmx100cmx45cm (lengthxhieghtxwidth) double door or lager suitable size weather/vermin proof, made out of 3.15mm thick CRCA sheet duly powder coated, mounted on 65mmx65x5mm (ISA6565) iron angles frame of height 45 cm from PCC bedding, factory assembled compartmentalized construction, free standing type including 3 phase and neutral 200 amps current carrying capacity Aluminium bus bar with epoxy insulated coating with colour code and insulated support, cable galleries inter connecting bus bar connection/linkage complete and conforming to IS 8623 and IP 54 class of protection as per IS 2147 complete, including making connection of cables of incoming and outgoing with outgoing with thimble/lugs, including the accessories as below complete and mounting the panel on ground floor with PCC(1:3:6) bedding upto a height of 45 cm above ground level ground level complete all as specified and directed by Engineer-in-Charge. (a) aluminium bus bar 200 amps for 3 phases & neutral - 1set (b) MCCB 4 pole 63 amps 35 KA at 415 V - 1 No (Incoming) (c) MCCB 4 pole 40 amps 35 KA at 415 V - 1 No (outgoing) (d) MCB DP-20Amp-5, MCB DP-32Amp-5, MCB-DP-40Amp-2No, MCB-TPN-63Amp-3No, MCB-TPN-32Amp-2 (e)Panel shud Have Addictional space along with suitable din rail for mounting of 10 nos, SP/SPN

M&L For Earthing complete with galvanised steel earth plate electrode 600×600×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth strip 25×4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed by Engineer-in-Charge.

M/S GASSI BROTHERS (BID ID -3257434)

M/S A.N CONSTRUCTIONs (BID ID -3257756)

Asian Marketing Co (BID ID -3256318)

M/S HAMIDULLAH KHUROO (BID ID -3257963)

FIRDOUS AHMAD BABA (BID ID -3257425)

BHAT CONSTRUCTIONS AND BUILFERS (BID ID -3257956)

M/S UTA MOTORS (BID ID -3262891)