REPAIR TO CERTAIN ROAD AND ROAD FURNITURE UNDER AGE B/R IV OF GE(S) AT JAIPUR MIL STN

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and depth not exceeding 50 mm deep etc complete all as specified and directed.

M&L for preparing surfaces by brushing with wire brushes and removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with mechanical blower and gunny bags to remove all loose dirt etc and applying evenly a tack coat of paving bitumen (VG 10) @ 5 Kg per ten Square metre on road by mechanical sprayer complete all as specified and directed.

M&L for providing premix bituminous macadam mixed laid with mechanical paver and 8 to 12 tonne power roller and compacted to required gradient and camber (Consolidated thickness 75mm or less) with paving bitumen 4% binder (viscosity grade VG-30) contents complete all as specified and directed. NOTE:- (i) Work shall be executed as per designed mix (job mix formula) approved by GE. (ii) If the bitumen content as per design mix found to be less than 4%, it shall be recovered at the rate of Rs 50/- per Kg for short of bitumen. If bitumen content found to be more than 4% as per design mix same shall be provided without any extra cost to the Govt.

M&L for providing bituminous premix asphaltic semi dense concrete 30 mm thick (consolidated thickness) with mechanical paver, mixed at hot mix plant transported to site in tippers, chipping mixed with 5.5% of paving binder (VG-30) viscosity grade, rolled to uniform smooth surface with 8 to 12 tonne power roller and compacted to required camber and gradient complete all as specified and directed. NOTE:- (i) Work shall be executed as per job mix formula approved by GE. (ii) Bitumen content as per design mix is found to be less than 5.5%, the short of bitumen shall be recovered at the rate of Rs 50/- per Kg and no adjustment shall be made if the bitumen content as per design mix found to be more than 5.5% same shall be provided without any extra cost to the Govt. complete all as specified and directed.

M&L for cleaning and preparing the road surfaces for road marking with reflective thermoplastic white road marking paint conforming to BIS 3262, laid through road marking machine in a layer painting lines, dashes, arrows, letters etc on roads, pavements and the like exceeding 10 cm wide with road marking paint, white or golden yellow of CRYSTALEX, using 5 Kg material per square meter by incorporating the white glass beads for reflectivity in 100 mm width.etc complete all as specified & directed.

S&F in replacement ABS Plastic Stud (Cat Eyes) dynamically designed having height impact strength and fitted with 2 Nos high reflective reflectors on both sides including fixing arrangement as per manufacturer’s instructions and as directed. Make: Cat eyes of DA Dark eye or equivalent as in /Tata VPI/ Gogia Plastic/3M

S&F in repair retro reflecting 90cm high road way delineator post black made of 16 gauge, 32 mm dia round pipe reflective in red, white and yellow colour prismatic reflection of 04 strips including embedding in PCC 1:3:6 type C-1 below 30cm ground level, complete all as specified and directed. (MAKE :Dark Eye or equivalent in TATA VPI/ Gogia Plastic / 3M as approved by GE)

S&F in replacement solar cat eyes (studs) made of aluminium di-casted body, 100% waterproof, both side reflectors, designed according to IP 65 of size 125mm x 125mm x 25mm with shank not less than 60mm length, high efficiency mono crystalline solar panel (2.5 V/0.3 watt), one Ni-Mh or Ni-cd rechargeable battery (1.2 V/1600 MA) having si80x super bright LEDs with 10000 to 18000 mcd (millicandela) view distance upto 1000 metre and flush road bearing capacity 10 MT, fixing in road by drilling a hole and with epoxy hardener etc as per manufacturer’s instructions at the location etc complete all as specified and directed. Model:- “DHRUV in dark eye or equivalent in TATA BP/Gogia Plastic/ Tata VPI as approved by GE.

supply and fixing convex mirror 800mm dia Polycarbonate Traffic mirror unbreakable round wide angle driveway mirror, with adjustable brackets and nuts bolts for installation and mounted on 60/75 mm dia mild steel pipe of 1000 mm height duly powder coated including embedding in PCC 1:2:4 ( 300x300x300mm) type B1 etc complete all as specified ad directed. Make: ABS Industry or equivalent in Dark eye/TATA BP/Gogia Plastic/Red Safe/Froniter/Tata VPI as approved by GE

Taking down cement plaster or cement lime plaster on PCC/stone surface/ brick surfaces/ceiling etc. including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on stone masonry surfaces or surface other than fair faces of brick work on wall CM (1:4) on walls finished even and smooth without using extra cement etc complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles.etc complete all as specified and directed.

M&L for brick work with subclass ‘B’ old size bricks straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified & directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar and removal of same from outside MOD land etc complete all as specified and directed.

Demolition Cement concrete (unreinforced ) concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregates as in sub base of floors etc complete all as specified and directed.

M&L machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade, with grey cement and pigment laid over and including 25mm thick sand cushion layer etc complete all as specified and directed.

All as per Item No. 17 above but except interlocking paver block

M&L factory made coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement and pigment laid over and including 25mm thick sand cushion layer etc complete all as specified and directed.

All as per Item No. 19 above but except interlocking paver block

M&L Pre-cast (factory casted) cement concrete kerb stone casted in PCC (1:2:4) type B-1 using 20mm graded stone aggregate with plain or interlocking joints, making groove in ground of desired dimension, placing in erect position kerb stone in edging and set and jointed in cement mortar 1:6 etc complete all as specified and directed.

M&L for taking down existing PCC kerbs and refixing the same for adjusting with level of interlocking tiles set in cement mortar 1:6 complete all as specified and directed. Note : Rate for extra excavation required for taking out kerb stobe and retuning filling of earth after refixing and removing surplus soil outside MD land deemed to be included in quoted rate.

M&L for preparation of plastered / stone kerbs/concrete surfaces as in road dividers along the road by complete removal of surfaces and applying two coats of synthetic enamel paint over a coat of primer etc complete all as specified and directed.

M&L for preparation of old plastered / stone kerbs/concrete surfaces as in road dividers along the road by complete removal of surfaces and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for providing of cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, in roof kerb or mud stops, for fixing poles, coping, rounded or chamfered on edges all as specified and as directed.

Schedule of Credit

M/S ROHIT CONSTRUCTION

Deep Construction Company

J.J.ENGINEERING

AMIT RISHABH BUILDERS PVT LTD