REPAIRS AND MAINTENANCE TO CERTAIN B/R NATURE OF WORKS AND PERIODICAL SERVICES (EXTERNAL AND INTERNAL) TO VARIOUS OTM BLDGS AND CERTAIN OTHER BLDGS INCL MES INSTALLATIONS AT HQTC BANGALORE

Amount

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section, in unframed work, in any position complete all as specified and as directed by Engr-in-charge.

Material and labour for 2nd class hard wood plain fillets. square, rectangular or triangular, not exc 3 sqcm in section, clean sawn, secured with nails or brads complete all as specified and as directed by Engr-in-charge.

Material and labour for 2nd class hard wood plain fillets. square, rectangular or triangular, exc 3 Sqcm and not exc 6 sqcm in section, clean sawn, secured with nails or brads complete all as specified and as directed by Engr-in-charge.

Material and labour for 2nd class hard wood plain fillets. square, rectangular or triangular, exc 6 Sqcm and not exc 13 sqcm in section, clean sawn, secured with nails or brads complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs sheet glass, of 3mm thick ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs sheet glass, of 3mm thick ordinary quality, ground or obscured or frosted, on one side in square not exc 0.5 Sqm in each pane complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 3mm thick ordinary quality colorless cast acrylic sheet with light transmittance of 92% including fixing with necessary screws, and aluminium beading complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 3 to 4mm thick translucent polycarbonate sheet including fixing with necessary screws, and aluminium beading complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 15mm bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "Hot" or "Cold" with long screwed shank and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs concealed cock 15mm bore, fancy type chromium plated with brass material and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs angle stop cock 15mm bore, fancy type chromium plated fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs bib tap/ angle cock/ concealed cock/ wall mixture/ basin mixture spindle for 15mm bore, with brass material any type and any size complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs premium quality 15mm bore central hole basin mixer with regular spout without popup waste system complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs premium quality 15mm bore wall mixer system with provision for overhead shower complete with 115mm long bend pipe, connecting legs and wall flange complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 15mm bore hand shower (Health Faucet) with 8mm Dia, 1 Meter Long flexible tube & wall hook complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 15mm two in one bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs glass corner shelf assembly fancy type made of 5 to 6mm thick glass of size 250 x 250mm fixed with brass CP brackets complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs sheet glass shelf assembly with L clamp consisting of 5 to 6mm thick glass 12 to 15cm wide with brass CP bracket guard and railing 45 to 60cm long complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs mirror cabinet with mirror of size not less than 500mmx350mmx125mm complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 6mm thick mirror of any size including rounding and polishing of edges with necessay fittings complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs stright disabled stainless steel grab bar of 32 mm dia and 600mm long complete all as specified and directed

Supply and fix in repairs L shaped disabled stainless steel grab bar of 32 mm dia and size 500x770mm complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs chromium plated rating doom 100mm dia with or without waste hole complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs chromium plated grating doom 125mm dia with or without waste hole complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs kitchen utensil rack in steel made of premium grade stainless steel and highly durable and rust-proof of size not less than 90cmx80cmx20cm complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs staineless steel soap dish, any type of size approximate size 160x60x90mm, fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 5mm thick mirror of size 450mm x 600mm mounted on 6mm thick commercial ply wood backing and screwed with PVC channel alround complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs brass chromium plated shower rose 125mm size complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs low density polyethylene (LDPE) pipes 32mm dia of pressure rating 6 kgf/sqcm complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 32mm bore bottle trap of PTMT having minimum water seal of 25mm (Minimum weight 32mm-260gms/40mm-270 gms) complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern of 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs PVC valveless, syphonic action type kit for flushing cistern of 10 litres capacity, low level cistern complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs plastic water closet seat, white or tinted, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Material and labour for 100mm thick PCC 1:3:6 type C-2 (Uisng 40mm graded aggregate) as in subbase layer complete all as specified and as directed by Engr-in-charge.

Material and labour for 75mm thick cement concrete type C-2, 1:3:6 (Using 40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for 25mm thick cement concrete type B-0, 1:2:4 (Using 12.5mm graded stone aggregate) as in flooring complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated plsatered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white washing complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated plsatered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white washing on walls complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated plsatered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white washing on ceiling complete all as specified and as directed by Engr-in-charge.

Material and labour for 2coats of distempering wall with distemper oil emulsion white or tinted through mechnical means. over a coat of 1mm thick wall care putty, including preparation of old surface after complete removal of existing treatment complete all as specified and as directed by Engr-in-charge.

Material and labour for 2 coats of cement based paint through mechnical means.over a coat of priming plastered and other surfaced with alkali resistant priming paint on wall including preparation of old surface after complete removal of existing treatment complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion emulsion through mechnical means complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of distemper oil emulsion on walls through mechnical means complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated surface of ceiling including washing, rubbing down and stopping of distempered and painted surfaces and applying one coats of distemper oil emulsion through mechnical meanson ceiling complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and applying one coat of cement paint through mechnical means complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and applying two coat of cement paint through mechnical means complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and applying one coat of exterior emulsion paint (weather coat) through mechnical means on walls complete all as specified and as directed by Engr-in-charge.

Material and labour for complete removal of existing treatment of walls and applying two coats of exterior emulsion paint (weather coat) through mechnical means over a coat of approved primer complete all as specified and as directed by Engr-in-charge.

Material and labour for complete removal of existing treatment of walls and applying two coats of plastic emulsion painting white or tinted through mechnical means over a coat of 1mm thick wall care putty complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old painted surface of any description not otherwise described wood and wood based surfaces over 10 cm width of girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

Material and labour for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old painted surface of any description not otherwise described steel and iron surface over 10 cm width or girth and applying one coat of synthetic eanmel paint complete all as specified and as directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Material and labour for vitrified ceramic tiles in dark shade 10mm thick of size 600mm x 600mm in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed of CM 1:6 and pointed in white/ coloured cement to match complete all as specified and as directed by Engr-in-charge.

All as per item No.60 here-in-before but as in wall skirting over and including 10mm thick rendering of CM 1:4.

Material and labour for non-skid ceramic coloured tiles 7 to 8mm thick of size 400mm x 400mm in floors etc., set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/ coloured cement to match complete all as specified and as directed by Engr-in-charge.

All as per item No.62 here-in-before but as in wall skirting over and including 10mm thick rendering of CM 1:4.

Material and labour for glazed ceramic coloured/ digital tiles in vertical surface 350x250mm x 7mm/ 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick bedding layer of cement mortar 1:4 complete all as specified and as directed by Engr-in-charge.

Material and labour for non-skid ceramic coloured tiles 7 to 8mm thick of size 300mm x 300mm in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/ coloured cement to match complete all as specified and as directed by Engr-in-charge.

Material and labour for 20mm thick granite (Jet black) of any type work (table rubbed and polished) in cooking plateform, widow sill and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade granite incl 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge.

Material and labour for machine cut cudappah stone slab 20-25mm thick over and including 15mm thick screed bed of CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engr-in-charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 140mm long floor door stopper of brass body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs door closer aluminium extruded section body hydraulically regulated, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engr-in-charge.

Resecuring or easing and adjusting without taking down door/ window shutters of any description exc 1 sqm and not exc 2 sqm complete all as specified and as directed by Engr-in-charge.

Taking down door/ window shutters of any description exc 1 sqm and not exc 2 sqm resecuring or easing and adjusting and refixing in same opening complete all as specified and as directed by Engr-in-charge.

Taking down door/ window shutters of any description not exc 1 sqm resecuring or easing and adjusting and refixing in same opening complete all as specified and as directed by Engr-in-charge.

Resecuring or easing and adjusting steel window without taking down shutters of any description complete all as specified and as directed by Engr-in-charge.

Taking down aluminium window shutters of any description resecuring or easing and adjusting including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and refixing in same opening complete all as specified and as directed by Engr-in-charge.

Taking down aluminium door shutters of any description resecuring or easing and adjusting including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and refixing in same opening complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair magic eye ball ultra-clear view with wide angle for all round visibility with ultra clear Lens , superior and antique brass finish with 180 degree great visibility to install over a wide range of door thickness up to 35 mm complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs stainless steel self closing auto hinges for wooden cabinet shutter complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs stainless steel telescopic channel ball bearing drawer channel 500mm with loading capacity: 45Kgs complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs curtain rod brackets fancy type brackets with rounded fancy type end knobs, with antique finish or coloured suitable for holding 25mm dia single curtain rods fixed to wall with necessary polished wooden piece 20mm thick exc 50sqcm in section complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 25mm dia aluminium powder coated, fancy type curtain rod complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs door seals aluminium body with nylon brushes width 38mm fix with alluminium screws complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs for prelaminated particle board, 18/19mm thick exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 40mm width of flap (when open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair ball catcher with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair mortice latch with two levers (vertical type), brass body and length of the latch is 65 mm complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate wirh necessary screws to wooden chowkhat or welding to steel door chowkhat complete all as specified and as directed by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and as directed by Engr-in-charge.

Supply and fix solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as directed by Engr-in-charge. Note: Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.

Supply and fix for factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix 100mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed by Engr-in-charge.

Supply and fix for 125mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix 125mm aluminium handles, cast type anodised complete all as specified and as directed by Engr-in-charge.

Supply and fix 200 mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each complete all as specified and as directed by Engr-in-charge.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and as directed by Engr-in-charge.

Supply and fix second class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engr-in-charge.

Material and labour for 30mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-charge.

Supply and fix 35mm thick 2nd class hard wood glazed and skeleton shutter as in door open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chambered or rounded mitred and beads for securing glass etc. size of members of shutter as specified in SSR part-I, Sec-08, Clause 8.24(a), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engr-in-charge.

Supply and fix 35mm thick 2nd class hard wood glazed and skeleton shutter as in door open rebated and prepared to receive glass, gauge etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.24(a), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engr-in-charge.

Supply and fix 125mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed by Engr-in-charge.

Supply and fix for 200mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix 150mm aluminium handles, cast type anodised complete all as specified and as directed by Engr-in-charge.

Supply and fix 150mm width of recess between flanges (when open) parliament hinges, mild steel cold rolled complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed by Engr-in-charge.

Supply and fix for glass, 4mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-charge.

Supply and fix for 300mm, ordinary rat tail rod pattern springs including roller and roller plate wirh necessary screws to wooden chowkhat or welding to steel door chowkhat complete all as specified and as directed by Engr-in-charge.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dresses stonework and precast concrete articles complete all as specified and as directed by Engr-in-charge.

Material and labour for pre-cast cement concrete block type C1 1:3:6 (Using 20mm graded stone aggregate) masonry with solid blocks, exc 10cm in width and setting in mortar 1:6 complete all as specified and as directed by Engr-in-charge.

Material and labour for providing precast cement concrete solid building blocks type C1 1:3:6 (Using 20mm graded stone aggregate) 10cm thick (with plain or interlocking joints) setting in mortar 1:4 in walls complete all as specified and as directed by Engr-in-charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for rendering 15mm thick on fair faces of brick works or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Material and labour for rendering 15mm thick cement plaster in cement morter 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Material and labour for 2 coats of distempering wall with distemper oil emulsion white or tinted over a coat of 1mm thick wall care putty, including preparation of new surface complete all as specified and as directed by Engr-in-charge.

Material and labour for preparing new plastered on wall and applying three coats of white wash complete all as specified and as directed by Engr-in-charge.

Material and labour for 2 coats of cement paint over a coat of priming plastered and other surfaced with alkali resistant priming paint including preparation of new surfaces complete all as specified and as directed by Engr-in-charge.

Material and labour for rendering 10mm thick cement plaster in cement morter 1:3, on concrete sufaces as in ceiling, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Material and labour for preparing new plastered on ceiling and applying three coats of white wash complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers only one face has decorative veneer fixed with nails over 12mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work including french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs second class harwood teak finish beading/ hand rail decorative antique finish in section n.exc 13 sqcm, clean sawn, secured with screws including french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs second class harwood teak finish beading/ hand rail decorative antique finish in section exc 13 and not exc 25 sqcm, clean sawn, secured with screws including french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed by Engr-in-charge.

Material and labour for preparing of old /new wall surfaces and applying two or more coats of texture paints of approved make and shade over etc after preparing surface with a coat of primer and 06 mm thick of plaster of paries punning to give a smooth and even surface of any colour complete all as specified and as directed by Engr-in-charge.

Material and labour for grinding with carborandum stones of 120 grit fitted in the machine in first phase and further second phase with carborandum of grit 220 to 350 and oxalic acid powder shall then be dusted at 33 grams per square meter on the surface and the surface rubbed with machine fitted hessian bobs or rubbed hard with pad of woolen rags to kota stone slab, marble tiles, granite stone, terrazzo tiles etc. as in floor/ skirtng etc including cleaning the surfaces complete all as specified and as directed by Engr-in-charge.

Dismantling for wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed by Engr-in-charge.

Supply and fix for tee grid suspension system of size 600mmX600mm type-1 made out of rolled framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm, main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thick of section 24 mmx25 mm, wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be prepainted polyster coated in off white/ white in colour complete with material, fixing, jointing etc as per manufactures instructions complete all as specified and as directed by Engr-in-charge.

Material and labour for fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as specified and as directed by Engr-in-charge.

SRUSHTI CONSTRUCTIONS

SB CONSTRUCTIONS

GKR and CO

G.M.R.& CO

OM ENTERPRISES

mahadevi Enterprises

M/s BHOOMI ELECTRICALS