REPAIR TO SANITARY FITTINGS, CERATIN B/R MAINT AT OTM AND MD ACCN AT AF STN and ARSR BLDG UNDER AGE BR -I OF GE BRICHGUNJ PORT BLAIR

Amount

Taking up or down, 20mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed.

Taking up or down, 15mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed.

M&L for 20 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

M&L for 15 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

Cutting chases for concealed water tubing and making good in cement mortar 1:3, cutting n exc 10cm girth in concrete block walling complete all as specified and directed.

Taking down cement plaster any description incl racking out joints, hacking for key scrubbing down with water, etc

M & L for rendering 10 mm thick in CM I:6 finished even and smooth without using extra cement etc complete.

M & L for rendering 5 mm thick in CM I:3 on for ceiling surfaces, finished even and smooth without using extra cement etc complete.

M&L for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered or unplastered surfaces of wall complete all as specified and directed.

All as per item -09 above but on ceiling

M&L for One coat of oil bound distemper Including one coats of alkali resistant priming paint Over a coat of putty including preparation of Old plastered or unplastered surfaces of wall complete all as specified and directed.

All as per item -11 above but on ceiling

M&L for two coat oil bound distemper including one coat of alkali resistant priming paint over a coat of putty including preparation of Old plastered or unplastered surfaces of wall complete all as specified and directed.

All as per item -13 above but on ceiling

Material and labour for complete removal of existing treatment on walls and applying one coat of Putty to make the wall surface in plumb line and applying two coats of Plastic emulsion paint over a coat of primer complete all as specified and as directed.

M & L For Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

Taking down of chowkhats or frames not exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and as directed.

All as per item no above but exc 1.5 sqm but n exc 4 sqm each complete all as specified and as directed.

Taking down and Refixing in the same opening of shutter of any description not exceeding 1 Sqm each including easing and adjusting as required complete all as specified and as directed.

All as per item No 19. above but exceeding 1Sqm and not exceeding 2 Sqm

All as per item No 19 above but exceeding 2Sqm each

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S & F Aluminium anodised (minimum anodisation is 50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections Hinges, handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply only 12mm thick pre-laminated particle board, exterior grade, lamination on one side with decorative choice lamination and the other side balancing white lamination fixed with screws as in door panel, complete all as specified and as directed.

Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified.

S upply only as in repairs Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed.

S& F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete .

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long

S&F 150mm long extruded aluminium alloy anodised handles fabricated type, anodised.

S&F Aluminium (extruded section ) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Supply and fix in repair decorative type curtain rod of 20-25mm dia aluminium alloy including anodised decorative brackets etc complete.

Supply and fix in repair bracket decorative type brass chromium plated aluminium alloy anodised for 20-25mm dia curtain rod complete all as specified and as directed.

S&F floor door stopper of length 140mm of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fix as in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

S&F as in repairs Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed.

S & F as in repairs aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) 300mm long and fixing clips of sheet, cast or extruded section and fixing bolt of cast aluminium alloy, complete all as specified and as directed.

S & F as in repairs aluminium, anodised, barrel tower bolt of extruded section, 150 mm long, complete all as specified and as directed.

S & F as in repairs 100 mm long extruded, aluminium alloy anodised handle, fabricated type, complete all as specified and as directed.

S & F as in repairs 150 mm long extruded, aluminium alloy anodised handle, fabricated type, complete all as specified and as directed.

S&F in repairs Aluminium (extruded section ) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Supply and fix in aluminium snake guard comprising nylon bristle duly secured with aluminium flat section of minimum width 30 mm and length 900 mm fixed to bottom rail of door shutter using aluminium screws complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

S & F 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

S&F 4 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and as directed.

S&F in repairs 12mm thick pre-laminated particle board, exterior grade, lamination on one side with decorative choice lamination and the other side balancing white lamination fixed with screws as in door panel, complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises.

M & L for Dark coloured vitrified tiles 10 mm thick (square/rectangular) polished, area of each tiles n exc. 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed with coloured or white cement to match including screed bed 15mm thick 1:4, complete all as specified and as directed.

All as per item no 93 here in before, but on vertical surfaces including 10mm thick CM 1:3 as in backing coat of dado/Skirting

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including screed bed or bedding layer of mortar 10mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

M&L for coloured glazed ceramic tiles, 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tile over and including rendering 10mm thick in CM 1:3 complete all as specified and as directed.

Material and labour Chequered cement concrete tiles, with grey cement and pigment 30cm x30cm x20mm thick set, jointed and pointed in neat cement slurrry in floors including 15mm thick screed bed in Cm 1:4 all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets Including frame of any description and any thickness, fixed in any position .

Material and labour for false ceiling with aluminum grid work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with 2mm dia GI wire hooked to roof with needful adjustment bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 4 mm thick finished with two coats of oil bound distemper over a coat of primer on exposed surfaces all as specified and directed.

S&F as in repairs Eco board / tiles for insulation and acoustic purpose of size 600 X 600 X 4mm thick fixed with screws or with staples to aluminium frame work including two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Dismantling for plain or corrugated roof sheeting of any description, any gauge, thickness, including Removing L-type or J-type bolts in Roof Covering.

S&F Pre-painted galvalume aluminium zinc coating GI based (corrugated/semi corrugated) sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply only integral water proofing compound complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

S & F MS Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed

S & F plates (Plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes with attachment etc and fixed by riveting or welding or with nut and bolts (including nut and bolts) conforming to Fe- 410-W Grade E- 250, quality B, complete all as specified and as directed.

Material and Labour for painting to new steel and iron surfaces of exc. 10cm wide or girth by two coats of synthetic enamel paints over a coat of red oxide primer including preparation complete all as specified and as directed.

S&F in aluminium composite panel sheet of 3mm to 4mm thick, fixed on existing aluminium frame work with plastic strips (double sided sticker) of suitable size of varying thickness of 10mm to 30mm over the existing aluminium work, applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant,The board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive, complete all as specified and as directed.

S&F repairs PVC connection 15mm size with CP brass Nuts of length 450mm complete all as specified and as directed.

Supply and fix in repair 32mm brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connection including necessary packing union and cap complete all as specified and as directed.

S&F in repair stop valves/cock 15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed.

S&F in repairs for 20 mm dia bore gun metal , globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repair 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed.

S&F in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed.

S&F in repairs two way bib cock, brass CP mixture for mixing hot & cold water complete of Make Jaquar Cat Part No ARI 39041 all as specified and as directed.

M & L for French Polishing on surfaces of any description, width or girth including preparation of Old surfaces, tor wood surfaces of any description over a coat of wood filler as required of any description, width or girth complete all as specified and as directed.

M&L Preparing existing wood or wood based surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint over a coat of pink primer

M & L for preparing Old steel/ Iron surfaces of any description exc 10cm Width or Girth and applying One coats of synthatic enamel paint over one coat of Redoxide primer complete all specifiedcand directed.

S&F in repairs Aluminium anodised chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed.

S&F in repairs CP towel rings fixed with and including plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed.

S & F in repairs stainless steel, towel rack, 600mm long with 10mm dia four rods and 20mm dia four hooks complete all as specified and as directed as per Jaquar Catalouge No ACN1181FHN Towel rack 600mm long without lower Hanger but with 3 hooks complete all as specified and as directed.

S&F in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with inlet, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed.

S&F in repair stop cock 15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed complete all as specified and as directed.

S&F in repairs CP gratings 125mm dia, complete all as specified and as directed.

S&F in repairs shower arm 190mm long light body with wall flange and exclusive shower single flow with revolving ball joint as per cat. No.477 / 493 of make Jaquar complete all as specified and as directed.

S&F in repairs Brass Chromium plated shower rose 125mm size, with swivel joint, fixing to steel pipe or union, complete all as specified and as directed.

Supply and fix in repairs vitreous China wash hand basin of size 550 x 400mm white flat back including chromium plated, 15mm fancy type pillar tap, waste coupling, including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and as directed.

S & F in repairs chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook , complete all as specified and as directed.(Make : Jaquar cat No ALD-CHR-593)

S&F in repairs coloured Toilet paper holder, CP, box type fixed to wall with chromium plated brass screws.

S&F in repairs sink with drainage board made up of stainless steel 1mm thick for kitchen or laboratory with plug washers and waste fittings including bedding in CM 1:3 into dwarf wall or cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc complete all as specified and as directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including connection to trap and to flushing pipe, anti syphonge pipe etc, including making good the floor complete all as specified and as directed.

S&F in repairs plastic seat cover for EWC(Pedestal Pattern) solid type closet set complete all as specified and as directed.

Supply and fix vitreous china CASCADE type WC single piece-WC with PP seat Cover, hinges, fixing accessories set, cistern fittings complete of size 640 x 360 x 690 mm , P trap-180mm in approved colour all as specified and directed as per ISI mark. Make : Jaguar cat Part No. SLS-WHT-6851P or equivalent .

Supply and fix PP Seat Cover of CASCADE type WC with , hinges, fixing accessories set, complete in approved colour all as specified and directed as per ISI mark. Make : Jaguar cat Part No. SLS-WHT-6851P or equivalent .

Supply and fix in repair internal kit with syphone for flushing cistern, CASCADE type, complete all as specified and as directed.

S & F in repairs glass corner shelf, Cat No.1173 of Jaquar or equivalent, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix brass CP 15mm dia bore Central hole basin mixer with regular spout without popup waste system with 450mm long braided hoses, 20mm cartridge size also available complete all as specified and as directed.. Make: Jaquar cat Part No.FLR-5167NB

Supply and fix brass CP 15mm dia bore wall mixer 3-in-1 system with provision for both hand shower and overhead complete with 115mm long bend pipe, connecting legs & wall flange (without) hand & overhead shower) complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar cat Part No.FLR-5281N or equivalent

S & F in repairs Angle Cock, 15 mm dia, cast copper alloy with capstan head, Chromium Plated, screwed down high pressure with crutch or butterfly handle for iron pipe etc. complete all as per Jaquar Catalogue No. CON-053 or its equivalent in Marc or Plumber complete all as specified.

Supply and fix long body bib cock with wall flange cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar cat Part No.CON-107KN or equivalent

Supply and fix in repair stainless steel plate rack of size 750x 787mm with all fittings as per sample all as directed

Supply and fix in repair PVC acrylic coloured Cabinet with shutters, inbuilt mirror and shelves, best quality of approximate size 350mm x 450mm x 10mm complete all as specified and directed.

Material and labour for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltr/hole by drilling 6 mm dia hole at a down word angle of 45 degree at 150 mm centre to centre and sealing the same complete.

Supply and Fix Fulsh Kit for low level Flushing Cistern complete all as specified and directed.

M& L for decco grill of aluminium section of 8 to 10mm thick as per sample kept in AGE office complete all as specified and directed.

M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed..(Make Apex Ultima)

Preparation of old external surfaces of walls, Facias, cornices etc and applying one coat of weather proof anti fungal paint (Apex - ultima) on walls all as per manufacturer instruction and as directed.

M/s Saina Enterprises

M/s Kamal Electrical

CHANDER SEKER ENTERPRISE

Nirman Construction Company

DEEPAK AGENCIES

M/s K Moorthi

V KARTHICK