NIT NO. 08 ITEM NO. 01

Amount

Preparation of beds for hedging and shrubbery by excavating 30 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth of necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately).

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Carriage of material (good earth) by manual labour including loading/unloading & stacking for lead for less than 50 m.

Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m. lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).

Carriage of manure or sludge by manual labour including loading /unloading and stacking for lead for less than 50 m.

Spreading of sludge, dung manure or/and Good earth in required thickness as per direction of officer in charge (Cost of sludge, dung manure or/and good earth to be paid separately).

Fine dressing of the ground.

Providing and planting of Ficus panda of height 45-60 cm. with 6-7 branches and healthy foliage in polybag of size 25 cm

Providing and planting of Bottle palm ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bag

Providing and planting of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 20 cm size of Earthen Pot / Plastic Pot

Providing and planting of Calliandra, emarginata of height 45-60 cm. in earthen pot of size 20 cm

Providing and fixing of Ms Circular Type Tree Guards fabricated by using M.S Angle plates RBS Fabric mesh 75x75 mm of 3 mm wire and other necessary fitting material etc complete as per drawing no.7 dated 29.05.2000 i/c painting with synthetic paint over a priming coat of approved steel primer complete as per CPWD specification.

Katcha Footpath

Earth work in excavation by mechanical mean (hydraulic excavator)/ manual means in foundation trenches drains; not exceeding 1.5 m width or 10 m2 on plan including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. … all kind of soil.

Providing and laying 75mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with Yamuna sand including finishing smooth etc. complete as per direction of Divisional In-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement, concrete in position to the required line, level and curvature , jointed with cement mortar 1:3 (1 cement: 3 coarse sand ) including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5mm ) including making drainage opening wherever required complete etc. as per direction of Divisional In-charge (length of finished kerb edging shall be measured for payment). (Precast C.C kerb stone shall be approved by Divisional In-charge.

Supply and stacking of Red Bajri.

Carriage of Red Bajri.

Spreading of Red bajri

Laying of G.I. Pipeline Size: 40 MM

Providing and fixing G.I. Pipes complete with G.I. fittings including trenching and refilling etc 40 mm dia nominal bore

Providing and fixing Gun metal valve with C.I. wheel of approved quality (Screwed end) 40 mm dia nominal bore

Painting of G.I Pipe and fitting with two coats of anti corrosive bitumastic paint of approved quality 40 mm diameter pipe

Providing and fixing of G.I Union in G.I Pipe including cutting & threading the pipe and making long screw etc. complete (new work) 40 mm dia nominal bore

Providing and filling sand of grading zone V or coarse grade, allround the G.I. pipes in external work; 40 mm diameter pipe

Providing and fixing G.I. Pipes complete with G.I. fittings including trenching and refilling etc Size 25 mm dia nominal bore (For Hydrant)

Providing and fixing of PVC Pipe of Good Quality having Size 25MM.