Proposed Development Work of Chena River at Chena Village in Mira Bhaindar Muncipal Coporation (Phase 3) in Area. (Basic Facility Development Fund)

Amount

Removing rich mix cement concrete including stacking the spoil sa sdirected with all leads, lifts etc, complete. SSR 46.13

Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. ( By Mechanical Means ) a) Upto 1.50m lift Normal Rate b) 1.50m to 3.00m lift, Add 10% c) 3.00m to 4.50m lift, Add 20% d) 4.50m to 6.0m lift, Add 30% SSR 12.03

Excavation for foundation in hardrock by chiselling and wedging or line drilling including shoring and strutting, dewatering a snecessary and disposing off excavated stuff asd irected etc. complete SSR 12.11

Excavation for foundation in soft rock including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. a) Upto 1.50m lift Normal Rate b) 1.50m to 3.00m lift, Add 10% c) 3.00m to 4.50m lift, Add 20% d) 4.50m to 6.0m lift, Add 30%

Excavation for foundation / pipe trenches in slush muddy / marshy / slushy / soil including use of poclain, labour for dewatering during execution including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, preparing the bed by cleaning the mud, labour required for execution for shuttering item but excluding backfilling, etc. complete. Providing and fixing shuttering shall??be??paid??separately.MJP SSR

Dewatering on BHP basis by using water pump including diversion of stream, providing coffer dams, earthern bunds etc. as may be necessary for foundation and other parts of the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superint ending Engineer will be necessary). SSR 12.23

Supplying hard murum/ kankar at the road site, including conveying and stacking complete.SSR 2.29A

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. SSR 2.32

Providing solingusing 80 mmsize trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.) SSR 21.40

Providing and laying in situ / ready mix / ready mix M15 cement concrete of trap / granite / quartzite / gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer / concrete batch mix plant (pan mixer) with natural /artifical sand)SSR 24.04

Providing and laying Cast in situ / Ready Mix cement concrete in M20 of trap / granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering unevenand honeycombed surfaceonly. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. Withfine aggregate (Crushed sand VSI Grade) SSR 24.10

Providing and laying Cast insitu / Ready Mix cement concrete in M-30 of trap /granite /quartzite /gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/ pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mixplant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 26.19

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, SSR no 25.35

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams as per detailed designs and drawings or as directed including centering, SSR no 25.54

Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping toplinthorparapetandsillofdoorsandwindowsmouldedasperdetaileddrawingsorchamferedasapprovedbytheEngineerincludingsteelcentering,

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR no 25.74

Providing and laying in situ / ready mix M-35 plain cement concrete of trap / granite / quartzite / gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of "V" shaped false joints to form suitable panels on the faces to approved esign with compacting by vibrating and curing complete, including plywood / steel formwork centering (excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer incharge basic rate shall be increased for height above 5..00 min follow in hmanners b) Height upto 5 M. (With Batch Mix Plant) With fully automatic micro process or based PLC with SCADA enable with fine agreegates of required specifications ( VSI sand finely washed etc ) i) Height up to 5 m, normal rate. ii) Height 5 to 7.50 m, add 5 percent extra over basic rate. iii) Height 7.50 to 10 m, 7.50 percent extra. iv) Over 10 m Height, add 10 percent extra for every 2.50m rise. SSR 17.42

Providing and laying in situ / ready mix controlled M-30 cement concrete of of trap / granite / quartzite / gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood / steel formwork, compacting by vibrating, finishing in CM 1:3 and curing etc complete (Excluding reinforcement) With reversibled rum type mixer / concrete batch mix plant (pan mixer). with fine agreegates of required specifications ( VSI sand finely washed etc ) SSR/17.54

Providing and laying in situ / ready mix M-30 cement concreteo f trap/ granite/ quartzite /gneissmetal for castincitu R.C.C.solidpiers,columnetc.includingprovisionofVshapedfalsejointstoformsuitablepanelsonthefacestoapprovedesignwithcompactingbyvibratingandcuringcomplete.Includingplywood/steelformwork,centering(excludingdewateringbymeansofpump)andincludingbaillingoutwaterandincludingCM 1:3 curing complete. a) Height upto 5 M. (With Concrete Mixer) i) Height up to 5 m, normal rate. ii) Height 5 to 7.50 m, add 5 percent extra over basic rate. iii) Height 7.50 to 10 m, 7.50 percent extra. iv) Over 10 m Height, add 10 percent extra for every 2.50m rise. SSR/17.49

Providing and laying in situ / ready mix M20 RCC of trap / granite / quartzite / gneissmetal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro process or based PLC with SCADA enabled concrete batch mix plant /pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc )RCC work of Box returns SSR/14.44 (b)

Providing and laying in situ / ready mix M20 CC of trap / granite / quartzite / gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro process or based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) SSR/14.39

PProviding cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA CD 8 Page 163 SSR/11.29

Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion as per approved drawings and technical specifications etc. complete SSR 14.56

Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcementof various diameters forR.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detaileddesigns,drawingsandschedules. includingcutting,bending, hooking the bars, binding with wires or tack welding and supporting as required complete

Providing and laying 6mm thick mastic asphalt wearing course on top of deck slab excluding prime coat with paving grade bitumen meeting the requirements given in table 500-29, prepared by using mastic cooker and laid to required leveland slope after cleaning the surface including providing antiskid surface with bitumen pre coated fine grained hard stone chipping at an approximate spacing of 10cm center to center in both directions, pressed in to surface when the temperature of surfaces not less than 100 deg C, protruding 1 mm to 4mm over mastic surface as per clause 515 etc. complete. SSR/14.55

Providing and applying interpenertrating Polymer network concrete coating system for bridges, bridge decks, girders, piers, RCC strectures for protections against chemical and weather resistance complete comprising of one Primer Coat of epoxy phenolic interpenetrating polymer, two middle coats of IP Net Middle Coatanda Top Coat of IP Net PU (Aliphatic PU) to a total thickness of 300±15 microns over a thoroughly prepared surface with aninter val of 3 hours to 78 hours between the coats. The application shall be inred and white colour and shall conform to the following : a. Tensile strength: Minimum tensile strength of the coating must be 15N/mm 2 and it should be determined as per ASTMD-2370-73 b. Elongation : Minimum elongation of the coating must be 15% and it should be determined as per ASTMD-2370-73 c.Specific permeability : The maximum value must be 0.15mg/cm2/mm/24 hr and it should be determined as per ASTMD-1653-74 d. Adhesion with concrete : The minimum adhesion with concrete by pull out method must be 2.5N/mm2 and it should be determined as per BS-3900-E-10-79 e. Impedence (In3.0%NaClSolution) Initial 9x1010 ohms minimum After 30 days 1x108 ohms minimum f. QUV Condensation test: Minimum 500 hrsas per ASTM-G-154 SSR/19.50

Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material) SSR/12.70

Providing 100 mm diameter GI water spouts as per detailed drawings in RCC slab and wearing surface / kerb etc. complete. SSR/14.50

Providing tar paper bearing including laying in proper position etc. complete. SSR/13.02

Providing Fusion Bonded Epoxy Coating SSR no 26.41

Providing and fixing bituminous pad 25mm thick for expansion joints in retaining wall, compound wall etc. complete. SSR NO 30.11

Conveying excavated material upto lid of 20KM (Lead chart)

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part3)-1984 in extra fine jointing mortar of fix oblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc.Complete.(The test shall be carried out conforming to IS:6441 (Part I) - 1972) SSR no 27.15

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc.Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) SSR no 27.16

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. SSR no 31.04

Providing and applying a base coat comprising of 1 Kilogram Polydee - MC and 1 Kilogram fresh cement after wetting the surface followed by drying the surface for 2days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2A : 1B)) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete. SSR no 31.11

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete

Item no 37 Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete SSR no 33.46

Item no 38 Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. SSR no 33.47

Item no 39 Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish SSR no 33.36

Item no 42 Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness lipped with 15mm (5 mm x 3) thick x 30 mm width on one style and top rail and 10 mm (5 mm x 2) thick x 30 mm width on other style and bottom rails. Theinner panels laminated with 2 mm thick termiteproof, waterproof and fire resistant moulded PVC sheet with 2, 4, 6 design in different plain and / or prelim colours on one side after routing the moulded design on flush doors and 2 mm plain and / or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etc. as per direction of Engineer incharge and manufacturers specification and drawing etc. complete. SSR no 39.48

Item no 43 Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick (Toilet) as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. SSR no 39.59

Item no 44 Providing and fixing frame with / without ventilator of size as specified with Country cut teakwood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete SSR no 39.01

Item no 46 Providing and laying telephone black /Amba White / Cadburybrown / Rubyred / Ocean Brown granite stone of 18 to 20 mm thick for door frame / dado / window boxing etc. On C.M. 1:6 including filling joints with polymer base filler no sing / moulding the sharp edges wherever necessary, curing, etc. complete. SSR no 33.68

Item no 45 Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). SSR no 39.26

Item no 48 Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre.The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box SSR no 39.39

Item no 49 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. SSR no 39.68

Item no 53 Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. SSR no 42.33

Item no 54 Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. SSR no 42.34

Item no 55 Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with PVC 5 liters flushing cistern with fittings,inletpipe with stop tap,brackets for fixing the cistern,32mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. SSR no 41.6

Item no 56 Providing and fixing white glazed earthen ware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete SSR no 41.63

Item no 57 Providing and fixing 450 mm x 550 mm size superior type Belgium mirror with 16 mm dia. nickel plated towel rod etc. complete. SSR no 42.2

Item no58 Providing and fixing chromium plated towel rod 16 mm dia and 75cm. In length including all accessories complete. SSR no 42.31

Item no 59 Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. SSR no 41.8

Item no 60 Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. SSR no 42.02

Item no61 Providing and laying for 225 mm dia salt glazed S.W. pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. SSR no 42.05

Item no 62 Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channel shalf round G.S.W. pipes, Brick Masonry, plastering from inside and air tight with 75 mm thick R.C.C. cover medium duty 140 Kilogram etc. complete. SSR no 42.17

Item no 63 Providing and fixing on walls/ ceiling/ floor 15 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete SSR no 42.89

Item no 64 Providing and fixing on walls/ceiling/floor 20 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR no 42.90

Item no 65 Providing and fixing on walls/ ceiling/ floor 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR no 42.91

Item no 66 Providing and fixing on walls/ ceiling/ floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete SSR no 42.92

Item no 67 Providing and fixing on walls /ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR no 42.93

Item no 68 Providing and fixing on walls/ ceiling/ floor 50 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. SSR no 42.94

Item no 69 Providing and fixing 15 mm dia. Screw down bib /stop tap of brass including necessary socket union nut complete. SSR no 41.4

Item no 70 Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. SSR no 41.43

Item no 71 Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. SSR no 41.44

Item no 72 Providing and fixing screw down for 25 mm dia. Wheeled stop tap of brass including necessary sockets /union nut complete. SSR no 41.45

Item no 74 Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. SSR no 41.46

Item no 75 Providing and fixing screw down for 50 mm dia. Wheeled stop tap of brass including necessary sockets/ union nut complete. SSR no 41.48

Item no 81 Providing and fixing 50 mm dia meter water meter with non-return valve including strainer, sockets /union nut and including water meter box making locking arrangement and lock. [without chamber] SSR no 42.30

Providing sandfaced plaster externally in cement mortar using approved screened sand ,in all positions including base coat of 15 mm thick in cement mortar 1:4 using water proofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receivet he sand faced treatment 6 to 8 mm thick in cement mortar1:4finishingthesurfacebytakingout grains and curing for fourteen days scaffolding etc.complete.

Item no 41 Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases (NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram / 15l). plaster crack should be filled by Acrylic base Crack seal / Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise on site technical reports from the concerned company technologist. SSR no 50.79

Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. SSR 17.37

Stamp Concrete of 100mm Thickness-Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement,coarse and fine aggregate (naturalsand/VSI grade finely washed crusheds and )Confirming to IS383,as per mixed in a batching and mixing plant/non tilting mixer and weigh batcher as per approved mix design,admixtures,transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi),spreading,laying with approved make pover,compacted and finished in a continous operation,finishing to lines and grades. Also Providing,Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method@5kg per sqm.Including texturing,and covering with plastic sheet(min200micron thickness) and also applying two coats of UV-stable,30%solids clear sealer@150 to 250gms per sqm using surface roller and protecting from falling dust,dirt and curring by curring compound/by providing cement vata in cement Mortor1:[email protected] center to center,admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same through ou tcuring period by any other method approved byEngineer-in charge or Landscape architect etc.complete.(prior approval of superinteding Engineer will be necessary ) SSR/54.01

Providing and fixing kerb stone with led lighting system as per following specifications: dimensions with vertical mounting legs with10mm horizontal square shape mild steel reinforcements. Illuminated kerb stone having visible dimensions:- 500mmx150mmx150mm. (asperirc-86-1983) 80mm leg shaving ms reinforcements shall be embedded in bt/concrete road surface. the kerb stone should have kerb angle of 45degree, with rubber plugs at both ends of the kerb stones (2nos) having load carrying capacity-vertical:1465kg, horizontal:2349 (certified by govt. Recoganized bodies) having thermal stability-:-40 to 120degree celcius (certified by govt. Recoganized bodies. Illuminated kerb stones including: in grace protection and connect or rating ip 67, electrical wire- (asperis:694), ledstrip (asperlm:80) standard. Including for electrical fixing-frp junction box consisting of-10amp. Switch module power supply (smps) having input voltage-230vac, output voltage 36vdc, 2polemcb. Illuminated kerb stone shaving warranty for 3 years. illuminated kerb stone shall be fixed into cast-in-situ cement concrete of m20 grade at base, back filling and grooves, including dismantling, fixing, removal of dismantled material and cleaning etc.Complete.The colour of kerb stone shall be provided as directed by engineer in charge. SSR 54.05

Providing, fixing and Fabricating Pargola for Seating,the item shall include all necessary labour and transportation etc complete. As per directions of engineer in-charge (Market Rate)

Providing Geotextile filter fabric for retaining wall SSR Page no 543 Material rate

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings SSR no 23.11

Providing ,aupplying, fabricating and fixing panel of aluminium composite panel cladding in approved shapemadeoutof4mmthickACPsheetmaterialconsistingof3mmthickFRgrademineralcorefollowingNBCpartIVFireandlifesafety(having2hoursfireresistanceinaccordancetoASTME119-12andBS476part6and7classO)sandwitchedbetweentwoaluminiumsheets(each0.5mmthickofAA5005/AA3105grade)Thealuminiumcompositepanelcladdingsheetshallbecoilcoatedwithkynar500basedPVDF/Lumiflonbasedfluropolymerresin(having70:30ratioofPVDFandacrylic)coatingofapprovedcolourandsg=hadeontopfaceandpolymer(service)coatingofbottomfaceasspecifiedusingstainlesssteelscrews,nuts,bolts,washers,cleats,weathersiliconsealent,backerrodsetc.overallweightoftheACPshallnotbelessthan7.5Kilogram/ One Square Metre) SSR 51.100

Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface. RCC pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230 mm/ 25 mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge) SSR no 51.192

Providing & Supplying corrosion inhibiting admixture in concrete to protect steel bars for all concrete in every part Polyalk CP 293 of approved make & approved by Engineer in charge migrating, non-nitrite based corrosion inhibiting admixture shall be added at a dose of 3 Kilograms per cum of concrete. The admixture should protect both cathodic and anodic sites and have been accredited by Indian Roads Congress, recommended for use by Ministry of Road Transport & Highways and should have a 4 year track record of use in both the Gulf Region and India. Admixture should have evaluated test reports demonstrating a corrosion rate of zero coulombs after 9 test cycles as per ASTM G 109 when tested from a research institution NBA accredited Grade A and internationally ranked among top 5 research institutions in the world in Annual Survey conducted by Georgia Institute of Technology ranking of research institutions. PH of admixture should be alkaline in nature, specific gravity of 0.99 – 1.1, colour : brownish. The contractor must intimate the engineer in charge prior to addition in concrete for recording. If the admixture is put in the concrete mix at the batching plant, a written record of the amount of admixture used shall be supplied to the engineer. The engineer must ensure that the specified dosage of admixture is added in the concrete mix. (Material Cost Analysis only) SSR 50.07

Providing and applying two coats of protective membrane over the cured concrete surface like R.C.C. footings, columns, plinth beams etc. which will be submerged under soil so as to protect the same. Apply two pack coal tar epoxy system of Sunepoxy Coaltar of approved make & approved by Engineer in charge, having solid content ranges from 80- 100%, Tack free time 4-6 hrs. Recoat after 16-24 hrs. Mix Part A and Part B of Sunepoxy Coaltar of approved make & approved by Engineer in charge in 1:1 ratio with slow speed stirrer and apply the same on a clean R.C.C. surface by brush. Allow to set for 8-10 hours and apply the second coat. The rate to include for application at all levels to various RCC elements to the satisfaction of the EIC etc. complete. SSR 50.06`

Gazebo-Providing, hoisting and fixing at all level precast or reinforced cement concrete gazebo with all elements like roofing, string courses, bands, copings, columns, pillars beams, plinth beams, railings, benches, flooring, foundations including architectural design, moulding, arches, shapes, and applying proper texture and painting coats to suit a particular asthetic elements(trunck of tree, shapes of animals, birds, timber benching any element or structure representing culture or tradition) the cost of required centering, shttering and reinforcement of 25 grade and fibrous material etcitem shall include all necessary labour . complete as per the instructions of Architect or Engineer - in- Charge (Market Rate)

Providing and fixing Precast RCC Tree guard around trees Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and supplying musical Drums consisting of 3 to 5 drums and 3 fixing flat anchors – the best solution to install instruments on hard surfaces (e.g.concrete). Dimensions of all 3 including 80mm gap between drums – 910 x 300 x 690 mm Height ranges from 550mm to 850mm Tall.Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and supplying Tubular bells consisting set of tuned metal tubes of different lengths used as a musical instrument, suspended vertically from a frame and struck with a mallet to produce sounds or melodies. It includes total of seven tubes of sizes 2'-3' (set of 7)Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and supplying Aerophones - Tembos Pentatonic. A stylish support structure made of stainless steel pipes in a vertical orientation, with the tallest standing over 3m to the lowest around 1m of different sizes.Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and Supplying Bell Lyre is an outdoor instrument made of 8 graduated stainless-steel bells in a stand. The bells range in diameter from 100mm to 290mmItem shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and Supplying the Xylophone Duo.It is a distinctive instrument with an ergonomic curved design. Accessible from both sides.The Duo can be built with individual notes of aluminum or GRP of size 2m x 1m.Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and Supplying Harmony Bells made of four bells of decreasing size and ascending pitch.Available individually or in a 'bunch' of three bells in complementary chords. Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and Supplying Petal Drums sports a classic yellow center in the form of a babel drum, surrounded by white aluminum petals.Each ‘Petal Drum’ contains a small (10”/250mm) Babel Drum encased within specific shaped aluminum ‘petals.’ The flower heads are securely mounted to a stainless-steel frame or ready to be wall-mounted Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and fixing FRP (Fibreglass reinforced plastic) Murals on the given base wall of thickness ranging from 100mm to 300mm given a 3d effect of desired shapes and designs Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and fixing FRP (Fibreglass reinforced plastic) cladding on the premade m.s framework or RCC structure base of thickness 25-50 mm with desired shape and designs. Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and applying Ferro cement cladding of reinforced concrete with thin walls that's made of cement mortar and closely spaced layers of wire mesh on existing M.S. framework with thickness of 20-25 mm. Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and laying of cobble stone of size 4"x4"x3" with 25mm thickness Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Natural exterior pebbles stone of different sizes ranging from 10mm to 80mm with transport and loading Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and fixing of sandstone planter pots made with desired shape and designs of sizes - H:16" D:22" Colour - Sagar Black Stone Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and fixing of sandstone planter pots made with desired shape and designs of sizes - H:30" D:18" Colour - Teak Stone Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and fixing of sandstone lattices made with desired shape and designs of sizes - 42" x 35" Colour - Pink Stone item shall include all necessary labours etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and fixing of 1200mm high glass fibre reinforced composite railing for footpath made of 80x80x8mm inverted proflies for fencing colums, 50x50x6mm profiles slottedas horizontal member, 25x15 rod for verticle member4s, SMC moulded square ring and cap including cover ring for 50x50mm tube, column shall be fixed on MS, base plate ....etc\ Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing double flange sluice valve ?? confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. MJP SOR Pg 145

Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM??in??all??respect??etc.??complete. MJP SOR pg no 123

SS Dust Bin Two sides for extra strength during oscillating movement. Oscillating arrangement for easy unloading of Garbage. Area :0.765 Sqm , Capacity In Litres 42 Ltrs, Height : 0.92m Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing and Fixing Rubber flooring with 100mm p.c.c. & 100 mm soling. Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing & Supplying & installation of Air walker etc.complete.Spec.- Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge. (Market Rate)

Providing & Supplying & installation of Seats & Waist Machine etc.complete.Spec.- Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing & Supplying & installation of Abdomen Rack etc.complete.Spec.- Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing & Supplying & installation of Pull down device etc.complete.Spec. Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing & Supplying & installation of Sit & Push up device etc.complete.Spec Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing & Supplying & installation of Pendal trainer & parallel bar etc.complete.Spec.- Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing & Supplying & installation of Walking machine etc.complete.Spec. Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing & Supplying & installation of Health ridding machine etc.complete.Spec.- Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing & Supplying & installation of Body building seesaw etc.complete.Spec.- Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing & Supplying & installation of Torsinal weast treadmill etc.complete.Spec.- Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge. (Market Rate)

Providing & Supplying & installation of leg recovery machine etc.complete.Spec.- Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing & Supplying & installation of Seated leg body frame etc.complete.Spec.- Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing & Supplying & installation of lumbosacral device etc.complete.Spec.- Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Providing & Supplying & installation of Double wking machine etc.complete.Spec.- Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Duck spring rider (PGKD-11) :- Equipment area 3.3 ft x 1.6 ft , safe play area 6.5 ft x 5 ft , kids capacity at a time 1 , ideal age 3 to 6 yearsItem shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Jumbo spring rider (PGKD-36) :- Equipment area 3.3 ft x 1.6 ft , safe play area 6.5 ft x 5 ft , kids caMarketpacity at a time 1 , ideal age 3 to 6 years (Market Rate)

Ponny spring rider (PGKD-38) :- Equipment area 606 ft x 5 ft , safe play area 9.8 ft x 8.2 ft , kids capacity at a time 3-4 , ideal age 4 to 120years Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Net rock scrambler 5 Ft (PGSL-31) :- Equipment area 6.6 ft x 5 ft , safe play area 9.8 ft x 8.2 ft , kids capacity at a time 3-4 , ideal age 4 to 12 year Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Simple marry Go round (PGMR-14) :- Equipment area 4 ft , safe play area 7 ft , kids capacity at a time 5 to 6 , ideal age 2 to 5 year Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Spiral Scrambler 7 ft (PGSL-12) :- Equipment area 5Ft x 2 ft , safe play area 8ft x 5.2 ft , kids capacity at a time 4 to 5 , ideal age 4 to 12 year Item shall include all necessary labours and transportation etc as per the instructions of Engineer - in- Charge (Market Rate)

Piramid water fountain- 25mm brass Foam jet nozzle 98 Nos,25mm Brass ball joint 98 Nos, 25mm Brass Valve 98 Nos,7.5 HP Customised Submersible pump for water fountain 2 Nos,Stainless Steel 304, 14 Gauge Ring With Nozzle tapping,Bending & Rounding 8 Mtr, Stainless Steel ( Grade 304)Screen Filter 2 Nos, (BMC Approved) Automatic waterproof panel 1 Nos, 6 Sqmm 3 core submersible cable 100 Mtr,4 Sqmm 4 Core Flexible cable 100 Mtr,Nozzle Mounted 18 watt IP68 RGB LED Lights 65 Nos ,Construction of RCC 4 X 20 feet waterbody, tiles work & Miscelleneous work Item shall include all necessary labours and transportation etc complete & as per the instructions of Architect/ Engineer in-charge. (Market Rate)

Providing detailed layout plan of area in scale1:500 including carrying out contour survey and detailed Engineering plane table Survey with the help of 24 Alidade .The dolomite area measurement of the plot and structures ,trees ,overhead line and underground service amenities with in the area, with triangular method and giving detailes of the structures, such as total area, type of building and distance from all corners taking trial pit 0.5 x 0.5 x 2.00 m.-2 Nos. per acre and collection of record from city survey / D.I.L.R. authorities and authentication.The plan shall be traced on 75 micron polyster film and shall be submitted along with three Amoniaprints. The contour levels shall be marked at 0.5 Meter intervals.Note:-The items includes-1)Traversingworkwiththeodoliteandsteeltape .2)LevellingGridWorkoftheterrain. 3)DetailedEngineeringSurveyandcontouringworkoftheterrain. 4)Plottingwork. 5)Collection of Record. a)upto1Acre SSR 1.22

BASIC TEST OF CEMENT Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.

BASIC TEST OF AGGREGATE.

a) Water Absorption, Specific Gravity,Impact Value, Crushing Value.

b) Sieve Analysis.

c) Abrasion Value.

d) Flakiness Index & Elongation Index.

e) Stripping Value. (for Bituminous Work)

f) Soundness

FINE AGGREGATE.

a) Fineness Modulus ( Sieve Analysis ),Silt & Clay Content

b) Chloride & Sulphate Content.

c) Silt Factor.

CONCRETE

a) Compressive Strength OF C.C. Cube (Set of 3 cubes)

b) Concrete mix design by Accelerated curing method. (By Accelerated curing method)

WATER PH Value, Sulphate & Chloride Content.

STEEL BAR TESTING

a) Upto 16 mm (Set of 3 Bars)

b) Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.)

SOIL / MURUM Plate Load Bearing Test.(Excluding Transportation)

Cutting down trees including trunks and branches with girths above 30 cm to 60 cm and stacking the materials neatly with all lifts and lead of 1000 m as directed and earth filling in the depression / pit if any.SSR 2.01

Cutting down trees including trunks and branches with girths above 60 cm to 90 cm and stacking the materials neatly with all lifts and lead of 1000 m as directed and earth filling in the depression / pit if any. SSR 2.02

Cutting down trees including trunks and branches with girths above 90 cm to 180 cm and stacking the materials neatly with all lifts and lead of 1000 m as directed and earth filling in the depression / pit if any. SSR 2.03

Cutting down trees including trunks and branches with girths above 180 cm to 270 cm and stacking the materials neatly with all lifts and lead of 1000 m as directed and earth filling in the depression / pit if any. SSR 2.04

Cutting down trees including trunks and branches with girths above 450 cm and stacking the materials neatly with all lifts and lead of 1000 m as directed and earth filling in the depression / pit if any. SSR 2.06

Clearing and grubbing road land including up rooting rank vegetation ,grass ,bushes ,shrubs ,saplings and trees girth upto 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned upto a lead of 1000 metre including removal and disposal of top organic soil not exceeding 150 mm in thickness. SSR 2.09

GARDEN SOIL :- Supplying on site garden soil well sieved 90% to pass through I.S. sieve of 10mm size Free from stones rubbish like dried grass roots and other such materials. The soil should be fresh be measured by measuring box (Farma) Item includes royalty charges, octroi, corporation Tax Transporting, loading – unloading etc GDSR 22-23

FARM YARD MANURE: - Supplying on site well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The color of the manure generally is black. The manure will be measured by measuring box. (Farma) Item includes Transporting, loading -unloading etc (.Lead charges per 50 km. considered.).GDSR 22-23 GDSR

Preparing Instant Lawn : Supplying on site fresh Garden soil (free from stones rubbish like dried grass roots, other such materials) for excavation area of depth of 20 cms.( consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.38a) pg 47

Preparing Shrubbery :- Excavating the round to required depth of 30cms, removing and conveying unwanted stuff to a required excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil & manure toughly well, leveling , watering on previous As derected by Engineer-Incharge. GDSR

Supplyings & planting of plants required for landscaping:-Bahva (Amaltash) Bakul . (height of plant 8-10 ft ) GDSR

Planting large flowering / shady trees :-Areca Palm should be well Developed,Good Branching ,healthy Condition,appropriate Size in Polybag,undamaged.7-8 FT GDSR

Semiskilled Labour (Mali) (PWD SSR 2022-23 Page no.-546/ Sr. No. -62)

Unskilled Heavy Labour. (PWD SSR 2022-23 Page no.-545/ Sr. No. -36)

Supplying & erecting triple pole and neutral distribution board (TPNDB),SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs , with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FP MCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no.SW-RCCB/RCCB

Supplying, fixing and commissioning 2 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

LV Cables of following sizes to be laid buried in ground/ laid in cable trays in ready made trenches, cables shall be fitted on wall / ceiling by the means of saddle & spacers. Miscellaneous items such as cable dressing accessories like nylon tie, Aluminium clamps, GI cleats, cable tags etc. are included in the scope. Removal of empty drums, cartoons and making the site normal as instructed by Purchaser client is included in scope. Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Cable end terminations for LV, XLPE/PVC insulated, PVC sheathed, armoured/ unarmoured cables including supply and fixing of single compression cable glands, stripping of cable insulation, supply and fixing of tinned plated copper lugs for copper cables for all phases and crimping the same to the conductor for the following cables. Miscellaneous items like cable lugs, G.I nut - bolts and G.I washers , consumables and other hardware materials as required to make the installation complete, are in the scope. All G.I Nut, bolt and washers shall be HDGI with 80 micron. One set of termination includes gland, lugs for cable core & accessories Supplying & erecting single compression type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm for XLPE armoured cable as per specification No. CB-GL

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting water tight terminal box of 1.6 mm (16 gauge) CRCA sheet of size 150 x 100 x 100 mm complete on pole as per specification No. CBSB

Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting Gate/garden light fitting with 200mm dia. glass bowl suitable for upto 12W LED Lamp on provided pipe as per specification No. FGODF/GLT

Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2.

Supplying and erecting Street light bracket for erection of Single fitting on tubular welded pole with 40 mm. dia 1.0 m. length “B” class G.I .pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no. FG-BKT/BPC

Supplying and erecting Street light bracket for erection of Double fitting on tubular welded pole with 40 mm. dia 1.0 m. length “B” class G.I .pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no. FG-BKT/BPC

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no.EA-EP

Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete.

Supplying and erecting G.I. pipe pole ‘B’ class 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. OH-PL/GIP

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 250 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 42.30 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 425 ltr etc., on provided M20 grade CC foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG

N A CONSTRUCTION PVT. LTD. (BID ID -6253854)