Construction of boundary fencing and entry gate for TMC Plot in Donvat Khalapur

Amount

SOLING: Providing & laying rubble stone soling using spotless stones below floors roads/pavements etc. mechanically / manually consolidated thickness as specified below with stones vertically handset interstices packed with smaller stone chips, binding with murrum & sprinkling water for proper consolidating and finishing to required levels in quantities as and when required etc. complete all as directed by the Engineer-in-Charge. 20 cm thick dry rubble soling.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) including scaffolding, raking out joints above ground level simultaneous and as directed by engineer in charge.

Providing and laying in position 1 :3:6 Plain cement concrete using graced stone aggregate of 20mm / 40mm max. size including consolidation using vibrator & needle if required finishing, curing, form work shuttering, centering etc. complete all as per specification and in quantity as & when required by the Engineer-in-Charge,

Providing and laying in position cement concrete of specified grade including curing, finishing etc. excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 using 20mm max. size aggregate.

"Centering and shuttering including strutting, propping etc. and removal of formwork” for Foundations, footings, bases of columns, etc. for mass concrete.

Providing and laying G I barbed wire 2.64 mm dia (12 gauge) two ply, 4 forks fixed at 15 cm intervals, G I staples etc including labour charges, transportation complete as directed by Eingineer in Charge.

Providing and fixing 100 mm RC Pre Cast Pole including labour for erection, transportation etc. complete as directed by Eingineer in Charge.

Applying 12 mm cement plaster including labour, hacking the concrete surfaces at all floors and levels in quantities as required at site including scaffolding curing, etc. complete all as directed by Engineer-in-Charge

Painting wood/steel work with two coats of SYNTHETIC ENAMEL PAINT On WOODEN / STEEL/ Metal surfaces including labour charges, transportation complete as directed by Eingineer in Charge.

Providing and fixing 50 mm GI pipe line B-class)(medium duty) for structural frame work including B- class enamel painting, labour, transportation complete as directed by Eingineer in Charge.

STRUCTURAL STEEL WORK: At all levels including supplying cutting fabricating welding or blotting erecting and fixing in position including painting with a primary coat of approved steel primer, including cost of materials labour with chasing in wall or embedding in floor and making good the same by filling 1:2:4 cement concrete and plastering if necessary all as specified and directed by Engineer-in-Charge.

"Galvanised iron Chain link fixed mesh of size 50x50 mm made of G.I. wire of dia 4 mm, frame work with necessary welding / bolting as directed by the Engineer and finishing with two coats of `B' Class enamel paint over a coat of Metal primer."

Firewings Infracon Services Pvt. Ltd

ask enterprises

Ansaruddin K Khatib

RAJSHREE CONSTRUCTION CONSORTIUM