Construction of Bus Stand and Workshop at Pandu Pindara in Jind Distt. CM announcement Code No. 17861 Dated 11.12.2016 (Pdg. Power Wiring only) Recall

Amount

(a) Main Switches. 31.12 Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections . 31.12(a) (xiv) Triple pole switch with neutral link 32 amp. 415 Volts. ( Cat-B )

31.12 (a) (xv) Triple pole switch with neutral link 63 amp. 415 Volts. (Cat-B)

(c) Moulded case Circuit breakers. 31.12 (c) Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 31.12 c (i) 15 amp.to 60 amp. 415 V ,10 KA 3-phase.

31.12 c (ii) 100 amp.to 220 amp.415 V,10 KA 3-phase.

(L) Miniature Circuit Breaker and Isolator. 31.17 Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (a) Miniature circuit breakers of 9 KA breaking capacity. 31.17(a) (ii) TP MCB 16 amp. to 32 Amp.

31.17(a) (iii) TP MCB 40 amp. to 63 amp.

(P) Pipe Laying. 31.21 Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. 31.21 (xxii) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

31.21(xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. 31.21(xxx) (b) PVC pipe 80 mm dia.

31.22 (Q) Earthing. 31.22(i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

31.22(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

31.22(iii) Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired.

31.22(v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

31.22(xi) Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required .

31.22(xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

31.22(xix) Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size.

31.26 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 31.26 (xxxix) 10 Sq. mm 4 Core Cable . ( Ard. )

31.26 (xxv) 25 Sq. mm 3.5 Core Cable . ( Ard. )

31.26 (xxx) Ard. 120 Sq. mm 3.5 Core Cable .

31.28 Supply and erection of suitable compression type brass cable glands for underground Cable. 31.28 (ii) 10 sqmm Cable 2 to 4 core.

31.28 (iii) 25 sqmm to 50 sqmm Cable 2 to 50 core.

31.51 Supply and erection of M.S. stand made of 50 mm x 50 mm x 6 mm angle iron frame and 150 cm long, 30 cm wide with MS sheet covering size 30 cm x 30 cm 3.15 mm thick fixed on the top of board & legs duly embedded in 1:2:4 cement concrete block 30 cm below ground level including the cost of cement sand welding painting & fabrication charges etc upto the entire satisfaction of Engineer-in-charge of the work.

31.66 Supply & fixing of rotary handle for on/off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material requied to complete the job in all respect. (i) Rotary handle upto 125 Amp. MCCB

(ii) Rotary handle above 125 Amp. MCCB

31.67 Supply and erection of mark double walled corrugated (DWC) HDPE pipe laid 1Mtr. Below ground level including diging and refilling of earth including cost of sutiable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. (ii) HDPE pipe 90/75 mm outer dia/inner dia.

31.81 Supply & Erection of cable tray made out of 2mm thick galvanized perforated sheet steel including erection of the same on wall or ceiling with necessary feature and other material required to complete the job upto the entire satisfaction of Engineer-in-Charge of the work. (i) 40 x 100mm

31.82 Supply & Erection of factory manufactured cable tray cover made of G.I. sheet complete with fastoner nuts bolts and inposition including all petty material required to complete the job upto the entire satisfaction of Engineer-in-Charge of the work. (i) 40 x 100mm

M.R. items NS-1 Supply & erection of double door (Indo Asian / Havells / standard make) sheet steel enclosure distribution board (Suitable for MCCB as incomer and MCB for out going circuit but with out cost of MCCB / MCB etc. The distribution board duly recessed in wall / surface mounting necessary connections with all labour & material required to complete the job in all respect up to entire satisfaction of Engineer-in-charge of the work. (i) 4 way