GE(U)/CHM-22/2021-22 - PROVN OF REPAIRS AND MODIFICATIONS TO AMBIENCE LIGHTING, GATE LIGHTS AND SECURITY LIGHTS AND OTHER MISC REPAIRS TO EARTHINGS AND DBS ETC AT WATER SUPPLY INSTALLATIONS UNDER GE (U) CHANDIMANDIR AT CHANDIMANDIR CANTT

Amount

S & F (in replacement) plastic laminated bakalite sheet 3mm thick, ISI marked "HYLAM" with CML No. written on the back side of the sheet , incl drilling / cutting for housing of required No. of switches/sockets/regulator as required at site, incl cadmium plated MS screwes for fixing of sheet with sunken boxes all as directed for following sizes:-

S&F (in replacement) MCB single pole, 240 volts, & 10 KA connection complete as directed of the following capacity.

(a) 6 to 32 amps rating

(b) 40 amps rating

S&F (in replacement) MCB DP 40 to 63 amp, 240 volts, 10 KA breaking capacity & connection complete as directed

S&F (in replacement) MCB TPN 40 to 100 amp, 415 volts, 10 KA,'c' series breaking capacity & connection complete as directed.

S&F (in replacement) switch fuse (main switch) iron clad or of steel metal, SP fused and neutral link, 240 volts with rewirable all necessary electric connection complete as directed of the following capacity :-

(a) 16 amps rating

(b) 32 amps rating

S&F (in replacement) pressed sheet metal enclosure (MCB DB), single phase and neutral with 200 Amps rated bus bar, double door type, 240 volts all as directed for the following no. of way :-

(c) 2 way but without bus bar

Supply & fix (in replacement) sheet metal enclosure with a 2 pin and earth plug and socket complete with one MCB SP 20 Amps, 240 Volts all as directed

Supply & fix fan step regulator, electronic type, 300 watt and connection Switch complete as directed, after dismantling/removing unserviceable regulator.

Supply & fix in (replacement) PVC insulated flexible cable" ISI" Marked three core copper conductor of size 23/.0052, covered with round insulation in white colour all as directed

Supply & fix in (replacement) PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable all as directed for the following sizes :-

(a) 4 sqmm size

(b) 6 sqmm size

S & Fix (in replacement) switch flush 5A single pole one way.(as per sample )

S & Fixing (in replacement) socket 5 amp, 5 pin flush type.(as per sample )

S & F (in replacement) switch socket combination 2 in 1,3 pin, 5 & 15 A flush type universal. (as per Sample )

S & F (in replacement) ceiling rose/batten holder surface bakelite three terminals.

S& F PVC conduit/Casing -n-capping on walls or in ground at depth of 40 cm of 20 mm external dia ISI marked for enclosing open wiring or loose cables duly clamped at intervals of not more than one meter complete all as directed

S&F(in replacement) MCCB 3 pole with neutral link 100 Amp 16 KA including the cost of suitable wooden board,lugs and grouting etc

S&F (in replacement) MCCB 3 pole with neutral link 63 Amp 16KA including the cost of suitable wooden board,lugs and grouting etc .

M&L for Making the hole and suitable grouting arrangements by lock nuts etc for fitting the Exhaust fan of any standard size/make and making the surface good to match the existing surface all as directed

Supply and replacing in repair (including checking & tracing defect in point wiring) single core PVC insulated unsheathed 1.5 sqmm copper conductor 1100V grade cable for point wiring/continuous earth wire etc in existing point all as directed

Supply and replacing in repair (including checking & tracing defect in point wiring/sub main) single core PVC insulated unsheathed 2.5 sqmm copper conductor 1100V grade cable for point wiring/continuous earth wire etc in existing point all as directed

M &L for grouting sunken box of 1.6 mm thickness in repair and fixing new bakelite sheet ISI Marked with suitable number of piano switch/socket complete of size 23x15cm. Note : Switch/Socket shall be paid separately under respactive item

Repair only any type of fitting LED Light/post top lantern/security light/wall mounted fitting and other domestic fitting etc. including taking down and refixing after repair all as directed

S&F LED Wall Bracket fittings/bulk lead as per sample for 10-12 watt LED all as directed

S&F LED Picture light with suitable wattage of lamp swivel for focussing awareness board as per sample all as directed

M&L for DP Switch 32 amp with indicator

M&L for Point wiring with PVC insulated, PVC unsheathed cable, single core, stranded, copper conductor cable 1.5 sqmm size, drawn into and including Concealed PVC Conduit not less then 20mm wide with 1.5 Sqmm unsheathed, solid copper cable for continuous earth wire and including pressed MS sunk in box 1.12 mm thick, concealed in wall, covered with with 2.8 mm thick plastic laminated bakalite sheet, ISI marked with CML No., all as specified & directed for the folowing :-

(a) One light/fan/bell point controlled by one switch

(b) One point for socket outlet 5 amp on independent board

(c) One point for socket outlet 5 amp same board

(d) One 3 pin 15 Amp socket outlet point controlled by one switch using 4 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board

M&L for balancing of load after decarbonising of wornout contacts including fixing of new lugs whereever required checking for current leakage etc.including fixing of missing screws din rails locking Knobs etc

M&L for taking down ceiling fan/exhaust fan/wall fan checking for fault and overhauling and replacement of condensor and flexible wire complete all as directed

M&L for sub main wiring with 2 single core PVC insulated unsheathed stranded copper conductor cable in and including concealed Rigid PVC conduit not less than 25 mm dia (OD) with all accessories and one single core PVC insulated stranded copper conductor cable as continuous earth wire and connected to earth dolly with 2X6 Sqmm.+1x4sqmm earth wire all as specified and directed

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, elect power cable (heavy duty) 1100 volt grade with stranded aluminium conductor of following size

(a) 16 sqmm 2 core

(b) 25 sqmm 4 core.

(c) 35 sqmm 3.5 core.

(d) 95 sqmm 3.5 core.

Excavation in trenches/Pits in any type of soil(soft/loose/hard/ dense soil), n.exc. 1.5M wide and n.exc. 1.5M deep and getting out complete, all as specified & directed .

Returning filling in with the earth obtained from Item No 1 here-in-before including spreading, leveling and well ramming in layers n.exc. 25cm thick complete all as specified & directed.

Removal of surplus excavated material to a distance n.exc. 50 Mtr and depositing where directed at a level n.exc. 1.5 Mtr above starting point complete all as specified & directed

Supply and laying sub class 'B' bricks (Old Size) laid flat in trenches as cable covers all as specified and directed

Supply and spreading clean and dry sand (unwashed) in trenches around the cable for cushioning all as specified & directed

Supply and laying GI pipe “Light Grade” in trenches, under floors, roads, along poles for protection of cables, including sealing ends all as specified & directed as specified & directed of size including PCC if directed for fixing in ground complete

(a) 50MM BORE

(b) 80 MM BORE

Painting of 9 m steel pole with cross arms, clamp of any length and shape for LT overhead line with two coat of aluminium paint including preparation of the existing surface including marking pole numbers in a 15 cm dia yellow circle & marking bands width 30 cm by fluorescent paint as directed by Engr-in Charge, from bottom of pole to 1.5 Mtr height, complete all as specified and directed.

Supply and fix in replacement LED flood light 50 watt, fitting IP 65 sysmmetric distribution luminarie with die cast aluminium housing finished in bloak and hammered finish bright anodised reflector and tonghened heat resistant glass cover and making connections with 23/0.0076 twisted copper flexible wire complete.

Supply and fix in replacement LED flood light 120 watt, fitting IP 65 sysmmetric distribution luminarie with die cast aluminium housing finished in bloak and hammered finish bright anodised reflector and tonghened heat resistant glass cover and making connections with 23/0.0076 twisted copper flexible wire complete.

Supply and fix in replacement LED flood light 180 watt, fitting IP 65 sysmmetric distribution luminarie with die cast aluminium housing finished Energy saving, environment friendly, long life, exclusive innovative die-cast aluminium flood light with highly efficient LEDs as light source, suitable for illuminating areas under threat from intrusion and reptiles for manpower detailed in water supply installation making connections with suitable copper flexible wire complete as per Havells make JETAVALOURFL180WLED757PINTNBLTG or equivalent .

Supply and fix in replacement LED flood light 200 watt, fitting IP 65 sysmmetric distribution luminarie with die cast aluminium housing finished Energy saving, environment friendly, long life, exclusive innovative die-cast aluminium flood light with highly efficient LEDs as light source, suitable for illuminating areas under threat from intrusion and reptiles for manpower detailed in water supply installation making connections with suitable copper flexible wire complete as per Havells make JETA VALOURHB200WLED757PINTWBLTG or equivalent .

M&L in replacement GI bracket for street light fittings fabricated with GI tubing 40 mm dia 'medium grade' 1.2 m long including painting a coat of alumimium paint over one coat of red oxide primer and bending to angle of 1200 fixed in repair complete.

M&L in replacement for FI Clamp of size 25 x 3 mm, length not less than 0.30 RM with nut - bolts pair of two for fixing of bracket painted with aluminium paint over a coat of red oxide primer on wall complete.

M&L Standared type shaddle with base for fixing of LT UG cable on wall with proper way at minimum distance 1 m apart complete.

PVC insulated sheathed, Alluminium 2.5Sqmm twin core cable, 1100 volts grade from junction box to street light fittings including connections complete.

PVC insulated sheathed, Alluminium 4 Sqmm twin core cable, 1100 volts grade from junction box to street light fittings including connections complete.

PVC insulated sheathed Alluminium 6 Sqmm twin core cable, 1100 volts grade from junction box to street light fittings including connections complete.

Surface excavation of any type not exeeding 30 cm deep and getting out all as specified .

S&F industrial type HIGHBAY Energy saving, environment friendly & robust highbay LED luminaire with high efficacy suitable for ceiling Surface/Suspended) IP 65 including provn of three core cable of copper conductor suitable for fitting upto 1.5 RM not less than 1.5 sqmm dia each core , from ceiling rose to fitting terminal for making connection, fixing the fitting on wall/ceiling including all necessary fixing accessories complete all as directed MAKE : Havells cat part no RADIOSOHB150WLED75790DBOPC or equivalent of approved makes

S&F steel tubular electric pole, swaged type, welded, type 410 SP-31 (9 metre long) complete with CI base plate, pole cap, bolts, nuts & screws all as specified including the following:- (a) Excavation in post hole not exceeding 1.5 Mtr wide & 1.5 Mtr deep for pole foundation & getting out in soft loose soil, returning, filling in the excavated soil after fixing the pole in foundation, ramming earth around in layers n.exc 25 cm thick and disposal of surplus soil to a distance n.exc 50 metres. (b) M&L for Providing PCC 1:4:8, type D2 ( using 40 mm graded stone aggregate) in foundation 600mm x 600mm x 1500 mm (planting depth) for concrete encasing the pole upto GL all as specified and directed. (c) M&L for Providing PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) for plinth block /Collar above GL, 300 mm high and 450 mm dia all as directed and as specified. (d) M&L for Painting of pole externally with one coats of black bituminous paint (upto planting depth) and above plinth block/ concrete collar with two coats of aluminium paint over a coat of red oxide primer including preparation of surfaces including painting of 30 cm wide black bands 3 Nos with synthetic enamel paint in alternate layers upto the height of 1.5 Mtr above plinth block.

S&F LED Light fitting complete LED 45 Watt suitable for Street lighting ,cmprising a single piece deep drawn aluminium housing in sand blasted & anodised finished from outside, aluminium gear tray wired with LEDs and driver Heat resistant glass and synthetic gasket ensure IP66

S & F sheet metal enclosure consisting of 2 No. aluminium busbar of size fixed on porcelin support inside enclosure, fixing of enclosure with pole using 40 x 6 mm size MS FI clamps of required shape with bolts, nuts & washers complete all as specified and directed.

Material and labour for 50 watt New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source.LED Post top lantern complete with connecting with suitable cable from pole box to fitting with grouting of 76 mm dia pole all as directed by Engr-in-charge as Havells cat part no .RUBYMAXIPT50WLED757PSYMTOPC or equivalent complete all as directed

Note: Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit Revised in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Vasudeva Trading Co.