Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹20.0 L+₹2.0 L (11.0%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹20.5 L+₹2.5 L (13.8%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹23.5 L+₹5.5 L (30.3%)Rejected-Finance 145 SAINIK NAGAR RAIBARELLI ROAD TELIBAGH LUCKNOW | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹24.4 L+₹6.4 L (35.7%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
13 Sept 2024, 6:00 pmClosed
GE (WEST) LUCKNOW
GE (WEST) LUCKNOW PIN 226002 C/O 56 APO
REPAIR/ MAINT OF SUNKEN FLOOR AND CONNECTED PLUMBING/ SANITARY WORK IN THE AREA OF AGE B/R-II UNDER GE (WEST) LUCKNOW
2024_MES_666699_1
GE/W/LKO/59 OF 2024-25
Open Tender
Civil Works
Item Rate
270 days
LUCKNOW
AS PER NIT AND TENDER DOCUMENTS
6 documents required · 6 mandatory
₹0
₹60,000
Yes
5 Nov 2024
19 Jul 2024
20 Sept 2024
19 Jul 2024
13 Sept 2024
2 Aug 2024
19 Jul 2024 - 26 Jul 2024
Amount
Demolition of brick work built in cement mortar including precast concrete articles complete all as specified and as directed.
M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and as directed
M&L for with fly ash bricks, old size, straight or curved on plan to any radius in half brick walls built in cement mortar 1:4 complete all as specified and as directed
M&L for Rendering 15 mm thick on fair faces of brick wall or concrete surfaces in CM 1:6 including finishing the surface even and smooth without using extra cement complete all as specified and as directed
M&L for rendering 15 mm thick in cement mortar 1:6 on brick wall or concrete surface including finishing the surface even and smooth without using extra cement including taking down existing cement or cement lime plaster on walls of any description including racking out joints hacking for key, scrubbing down with water etc. and removing the rubbish complete all as specified and as directed
M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling surfaces including three coat of white wash finishing the surface even and fair including taking down existing cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing the rubbish complete all as specified and as directed and directed.
M&L for two coat of oil emulsion distemper on walls over 1 mm thick wall care putty including complete removal of existing treatment on wall ( any number of layers ) complete all as specified and as directed.
M & L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over 1 mm thick plaster of paris putty to prepare the surface even and smooth including complete removal of existing treatment (any number of layers) complete all as specified and as directed
M&L for 1 mm thick Birla white putty on wall (two or more coats) complete all as specified and as directed
M&L for preparation of old plastered surfaces of walls and applying two coat of cement base paint complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls and applying two coat of cement based paint over cement primer complete all as specified and as directed.
M & L for preparation of old plastered ceiling surfaces and applying two coat of white wash complete all as specified and as directed
M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of white wash complete all as specified and as directed and directed.
M&L for preparation of old plastered or unplastered surface of wall and applying two coat of white wash complete all as specified and as directed and directed.
M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and as directed
Demolition of sunken slab floor of WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab as follows:- (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with chemical " PIDIPROFF LW of Dr Pidilite or equivalent " as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long at bottom of the sunken floor and wraping of bath seal tape on the pipes inserted through walls to floor area and seal it (Bath seal tape product of Dr fixit or equivalent and grouting around the inserted pipes by pouring Dr fixit bath seal or equivalent grout as directed (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP or equivalenont all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC or equivalent of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from top of floor level slab and allow it dry completely. (f) Fill the sanitary gaps with sealing compounds complete.
M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregate for filling in sunken slab complete all as specified and as directed .
M & L for PCC 1:2:4, type B0 as in padding or levelling coarse for filling undulations or depression on roof and for platform for mounting service tanks complete all as specified and as directed
S & F CI spun Hubless Pipes 100 mm bore single socketed in any length with rubber ring joints , fixed on walls with shield coupling ss (304) with EPDM rubber gasket including taking down existing pipes (any type) complete all as specified and as directed
S & F CI spun Hubless Pipes 100 mm bore single socketed in any length in trenches or in floors/ walls with shield coupling ss (304) with EPDM rubber gasket including taking down existing pipes (any type) complete all as specified and as directed
S & F CI spun Hubless Pipes 75 mm bore single socketed in any length with rubber ring joints , fixed on walls with shield coupling ss(304) with EPDM rubber gasket including taking down existing pipes (any type) complete all as specified and as directed
S & F CI spun Hubless Pipes 75 mm bore single socketed in any length in trenches or in floors with shield coupling ss(304) with EPDM rubber gasket complete all as specified and as directed
S & F CI spun Hubless bends any radius 100mm size complete all as specified and as directed
S & F CI spun Hubless bends any radius 75 mm size complete all as specified and as directed.
S & F in repair 100 mm dia CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and as directed
S & F in repair 75 mm dia CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and as directed.
S & F in repair vitreous china wash hand basin white flat back size 550x400mm including 02 Nos angle iron bracket 40x40x5mm bracket CP waste coupling, and 32mm dia PVC waste pipe, complete all as specified and as directed.
S & F in repair Vitreous china squatting pan Orissa pattern 'long pan' size 580x440mm white with 'P' or 'S' trap, front or back inlet with connector to CI hubless connector pup fit connector the pipe any pattern excluding flushing cistern and flush pipe including provision of lime concrete bedding complete all as specified and as directed.
S&F in repair Vitreous China wash down water closet pan, pedestal pattern, white, with 'P' or 'S' trap, (excluding flushing cistern and flush pipe,) including plastic water closet seat cover, white, closed pattern with flat bottom and cover, fixed with MS chromium plated hinging device including CI hubless connector pup fit connector pipe (or outgoing pipe) and to flushing pipe etc. and making good to floor complete all as specified and as directed.
S & F GI tubing 15mm dia medium grade galvanised with all fittings fixed to wall and in floor, cutting and chases, pinning in brick wall for concealed GI tubing and making good in CM 1:4 n.exc 10 cm in girth including taking down existing tubing, complete all as specified and as directed and directed
S & F GI tubing 20mm dia medium grade galvanised with all fittings fixed to wall and in floor, cutting and chases, pinning in brick wall for concealed GI tubing and making good in CM 1:4 n.exc 10 cm in girth including taking down existing tubing complete all as specified and as directed and directed.
S & F in repair PVC valveless syphonic action duel type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and as directed
S & F in repair 15mm bore PVC connection 450mm long with PTMT nuts and washer complete all as specified and as directed
S & F in repair for CP bib taps 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified and as directed.
S & F in repairs 15mm bore, fancy type shower rose, chromium plated complete all as specified and as directed.
S&F in repair stop valves concealed type 15mm bore, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
M & L for Health faucet Brass/ chromium plated suitable for 15 mm dia pipe with 1.25 metre long flaxible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed.
S & F in repair brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15 mm bore size complete all as specified and as directed.
S & F in repair brass CP kitchen sink mixer for mixing hot & cold water and long bend pipe and wall flanged screwed down for iron pipe of 15 mm bore size complete all as specified and as directed.
S & F in repair CP brass center hole mixer for wash basin for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and as directed
S & F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and as directed.
S&F in repair 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank, Swan neck type and fly nuts screwed for iron pipe ISI marked complete all as specified and as directed.
S & F in repair Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed
S & F in repair SS Grating doom 125 mm dia with waste hole complete all as specified and as directed.
S & F in repair SS Grating doom 100 mm dia with waste hole complete all as specified and as directed.
S and F in repair Hard/Rigid PVC waste Pipe with socket, 32 mm bore for WHB complete all as specified and as directed.
Supply and fix in repair Hard/Rigid PVC waste Pipe with socket, 40 mm bore for sink complete all as specified and as directed
S & F in repair of premium quality plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and as directed.
S&F in repair Rotational moulded polyethlene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20/ 25 mm dia ball PVC valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified and as directed.
S&F in repair Rotational moulded polyethlene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20/ 25 mm dia ball PVC valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified and as directed.
S & F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and as directed and directed.
M & L for Non skid ceramic floor tiles, 7 to 8mm thick (squar or rectugular ) area of each tile exceeding 0.11 sqm and not exceeding 0.18 in floor shade as approved size over and including 15mm thick screed bed in CM 1:4 and pointed in white or coloured cement to match the shade including dismantling/ demolition of existing floor, hearth or wall tiling complete all as specified and as directed
M & L for glazed ceramic coloured tiles of size (350 x 250 mm) x 7/ 450 x 350 x 7mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles as in skirting/dados over 10mm thick backing coat in CM 1:4, including dismantling/ demolition of existing floor, hearth or wall tiling complete all as specified and as directed.
M & L for coloured vitrified tiles of size 600x600x8-10mm thick as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in CM 1:4, including dismantling/ demolition of existing floor, hearth or wall tiling complete all as specified and as directed.
M & L for coloured vitrified tiles of size 600x600x8-10mm thick in vertical surfaces such as dado/skirting with and incl 10 mm thick backing coat in CM 1:4, including dismantling/ demolition of existing floor, hearth or wall tiling complete all as specified and as directed
S&F 'E' board everest make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be poweder coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm abd soaced at 1200mm centers securely fixed to be structural soffts by approved hangers at 1200 mm maximum centrers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug level and justers and screws etc. The last hanger at the end of each main runner shall not be grater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200x600mm modules cross tee longer than 600mm to be supported independtly. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour including dismantling of existing false ceiling and boarding any description all as per manufacture insturction.
S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia CI pipe complete all as specified and as directed
S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 75 mm dia CI pipe complete all as specified and as directed
S&F in repair CI, WC connector Push Fit/ Long type 100mm dia, complete all as specified and as directed.
M & L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long ,including demolition of cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and as directed and directed
M/s Bhadoria Associates (BID ID -3090339)
Spectrum Enterprises (BID ID -3090423)
M/S KAUSHIK CONSTRUCTION (BID ID -3089788)
m/s raghubar dayal (BID ID -3095355)
M/S VISHAL ENGINEERS (BID ID -3089772)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .