Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.7 LAccepted-AOC 28 1 16 | L1 | Accepted-AOC L1 | |
| 2 | L2₹37.3 L+₹60,614 (1.65%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹38.8 L+₹2.2 L (5.92%)Rejected-AOC NO 10 RAJIV GANDHI NAGAR ULAGANERI MADURAI 625 107 | MADURAI | MADURAI | TAMIL NADU | 625107 | L3 | Rejected-AOC L3 | |
| 4 | L4₹40.9 L+₹4.2 L (11.5%)Rejected-AOC 15 3 625017 | MADURAI | TAMIL NADU | 625017 | L4 | Rejected-AOC L4 | |
| 5 | L5₹41.4 L+₹4.7 L (12.8%)Rejected-AOC | L5 | Rejected-AOC L5 |
Tender Value
₹39.2 L
EMD Value
₹39,222
Closing Date
14 Feb 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Commissioner Madurai Corporation
Aringar anna maligai
Improvements works to primary school and middle school at Mangalagudi in ward 9
2024_MAWS_415214_1
E1 / SFC -SIG Phase 3 / Pack 1 (O-M) / Est No 000959 / 23-24
Open Tender
Civil Works
Lump-sum
60 days
Madurai
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹39,222
12 Mar 2024
30 Jan 2024
14 Feb 2024
30 Jan 2024
14 Feb 2024
30 Jan 2024
Amount
Dismantling the Existing Damage RCC and Clearing Away From the Site
Dismantling the Existing Damage Brick work in cement mortar wall under 3 m height and Clearing Away From the Site
Dismantling the Existing Damage floor tiles and Clearing Away From the Site
Dismantling the Existing Damage doors and windows and Clearing Away From the Site
Picking cement plastered surface and Clearing Away From the Site
Earth work excavation in all kinds of soils except hard rock requiring blasting, inclusive of shoring, strutting and baling out water wherever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing the surplus earth within compound in places as shown by the deptl.officers, clearing and leveling the site with initial lead of 10M and lift of 2M etc.Comp.SI.No.62-rate for 10m3
Supplying and filling in foundation and basement with filling Quarry Dust in layers of not more than 15cm.thick well rammed watered and compacted etc.,complete complying with standard specification.
Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification
Plain Cement Concrete 1:2:4 (one cement two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification
Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.
Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.
Supplying and erecting shuttering with necessary support for piaint surface such as R.c.c boxing side slab and smilar r.c.c slap with all cross bracing etc.complete in all floors of any height.(The retrieved materials should be taken back by the contractor) the payment for centering shall be given after the concrete is laid (vertical portion)
Supplying and erecting shuttering with necessary supports for plain surface such as plinth beam and lintel sides with all cross bracings ets., completc
Supplying and erecting centering for sides soffits and strutting For plain surface such as reinforced cement concrete slap "T" or "L" beam lintel bed block staircase waist slap , landing slap canopy etc . complete in all floors of any height.(The retrieved materials should be taken back by the contractor) the payment for centering shall be given after the concrete is laid (bottom only)
Brick work in CM 1:5 (one cement & five sand) using\ III class country bricks of size 8 x3/4"X41/4"X 2 1/4 " including finishing, curing, etc., complete complying with standard specification., (For Ground floor)
Fabrication supply and fixing of steel door made of 40x40x6mm MS angle for outer frame and shutter made out of 35x35x6mm MS angle with necessary stiffness 32x6mm and flats at 30cm interval and necessary cross diagonal MS flats. The shutter frame should be fully covered by 18G GR sheet and provided with required locking arrangements and one coat of red oxide paint and primer etc…door(1.00mx2.10m) G.F
Fabrication supply and fixing of steel Window made of 40x40x6mm MS angle for outer frame and shutter made out of 35x35x6mm MS angle with necessary stiffness 32x6mm and flats at 30cm interval and necessary cross diagonal MS flats. The shutter frame should be fully covered by 18G GR sheet and provided with required locking arrangements and one coat of red oxide paint and primer etc…Window (1.20mx0.90m)
Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter
Supply and fixing in position of best approved colour design and quality FRP sheets of 1.5mm thick with necessary U or j bolts bitumen washers and cutting the frp sheets to the required size etc.complete.,
Fabrication supply and erection of tubulor post with truss(100mm,80mm,75mm) the rate shall be include the cost of tublor post truss,members labour charges for manufacturing and erection and painting etc omplete
Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete
special ceiling plastering with cm 1:3 10mm tk and finishing all the Rcc exposed surface such as Rcc slabs ,sunshades,canopies,staircase step etc complete
Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum
Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete.,
Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work
Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. Sub
Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement Colour
Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m
Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.
Painting two coats with Ready Mixed Enamel Paint over the old iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.
Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator (SD16)
Supplying and fixing of box type twin fluorescwnt fitting with copper choake and condensor (HPF) coplete with isi mark 4FT 40 watts
AC Ceiling Fan complete 1200 mm (48") Sweep with 300mm Down Rod (without Regulator
Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying 60mm thick high strength type conforming IS 15658-2007 of Rubberised interlocking paver block in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in herring bonepattern with quarry rubbies cushion below the uniform shap of approved non sticking surface in top and the rate is including levelling the base preparation at paver as sub base, quarry rubbies cushion 150mm thick laying out of pavement cut the pies of fix the edge vibrating the pavers, sweeping transporting loading and unloading and laying of paver block as per standard specification etc.,
Providing Geological survey to fix the borewell point
Drilling 150mm dia borewell in all kinds of soils expect hard rock by first taking pilot bore and than enlarged to the required dia to enable to inserting the P.V.C. casing pipe by directed rotary mud and circulation method including all labour and hire
Supply of 150mm dia P.V.C.casing pipe
Labour charges for inserting 150mm O.D. PVC casing pipes assembly (with slot or without slots) in the drilled bore including jointing the pipe etc. complete
Drilling 150mm dia vertical bore in hard rock to the required depth including charges for labour,fuel,water required for Crilling etc., completed.
Supply of 140 mm dia P.V.C.casing pipe &labour charges etc complete
Developing the borewell with air compressor of 300 cfm capacity (min 8 hours) including transportation labour and fuel charges for compressor as directed by corporation yield test by "V" notch method.
Supply and delivery of three Phase wet type submersible pumpset with duly 50 lpmx175m head fonform to IS 8034/88 with stainless steel shaft dynamically balanced SS impeller SS pump and motor casings and directly coupled to suitable without panel board. 5hp
Supply and delivery of wall mounting type control panel board made from MS sheet 18 SWG vertin proof box type comprise of suitable Doi stater MCB for 3 phase pump set,ammeter over load relay under voltage protection power capacitor with ISI mark dry running preventor single phase preventor for 3 phase pumpset pilot lamps with swithces internal wiring as per iE rules and suitable for operating the pumpset with duly 501x100m heads.
Supply and delivery of PVC insulated and sheathed 4 sq.m copper cable conforming to IS 694/1990 suitable for submersible pump set..
Supply of PVC pipe and G.I pipes and PVC pipe & Specials. 40mm upvc Pipe
Nylon Rope
40mm Gi pipe
40mm Gi Coupling
40mm Gi bend
40mm GM gate Valve
40mm Gi elbow
40mm Gl Tee
40mm Clamp set Ls
Labour charges for erection of submersible pump set bore well including fixing and jointing submersible cable with proper clamps pressure gauge up to the exterior wall of pupm room kisok and erection of panel board consisting of TPCIN switches starter volt meter ammeter three indicator tamp capacitor single phase preventor ater level guard laying and jointing if cables and earthing complete the pumpset on trial for 3 days..
Labour charges for over head wiring from EB pole to pump room by fixing 32mm dia GI pipe to the required height over roof slap of pump room ads directed by EB authorities including fixing copper wire in four layers and inslulated with proper reels wire required MS clampset supp delivery and fixing of all materials such as bore well cover clamp set U kondi 7/20GI wire insulated reels 24 18 TW meter board 10x4 aorial board PVC Tape roll copperd earth plate GI bolt and nut with washer nutral linkPVC insulted copper wire (7/20 wire up to 10 HPm 7/16 wire above 10hp)1”PVC hose pipe 1” PVC clamp 25mm PVC encacing pipe 332AMPS fuse carroar 6no 10HP and 60 amps fuse carrier.
Supply and delivery and fixing of HDPE tank as per is 12701/1996 inculding loading, unloading ,transportation and labour charges for fixing of the gi pipes and specials for pipe connection works including cutting ,threading and fixing chages etc.,1000ltrs
Add GST 18%
SELVAKUMARI
M RAJA
BALAJI CONSTRUCTION
K MURUGANANTHAM
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .