Comprehensive Maint to include BR EM wks such as Repair to Chajja Balcony Parapet Roof treatment of Officer Md Accn electric wiring and certain other items at Offrs Accn at Dhar Road under GE Army Dhar Road

Amount

Demolition/Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc,complete all as specified and directed .

M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as directed.

-ditto- all as per above here in but except bricks.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls, Ceiing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement all as specified and directed.

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl WPC as per user manual complete all as specified and directed. (WPC will be measured and paid separately).

Supply only liquid WPC

M&L for rendering 10mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. .

M & L for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer etc complete all as directed.

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance and all as directed.

M&L for two coat of Acrylic smooth exterior emulsion paint over one coat of acrlic primer incl preparation of new plasterd surface by spray gun machine complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge.

M & L for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer etc complete all as directed.

M&L for preparation of old surfaces by removal of existing treatmen and applying two coats of oil emulsion distemper over a coat of primer on surface of walls through electrical operated grinder etc, complete all as spcified and directed.

M&L for applying 2mm thick wall care putty in two coats on plastered surfaces of wall and smoothening the surfaces with sand paper/mechanised sanding etc preparatory to paint, complete all as specified and as directed.

M & L for preparation of old surfaces by removal of existing treatment and apply two coats of cement based paint over a coat alkali primer resistance etc complete all as specified and directed .

M&L for applying two coat of Acrylic smooth exterior emulsion paint on walls, pillars cornices etc surfaces by spray gun machine incl by complete removal of existing sureface & filling necessary putty where required as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

M&L for preparation of old surfaces by rubbing , washing etc and applying one coats of oil emulsion distemper on ceiling etc complete all as spcified and directed .

M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm all as specified and directed.

M&L for one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

M & L for one coat of white washing on old surface of wall including preparation of old surfaces by washing and rubbing down etc complete all as specified and directed.

M&L for reparing of RCC projection, chajja, roof facia, celling by scrapping, cutting, derusting and cleaning exposed reinforcement surfaces of damaged loose RCC surface and applying neat cement slurry @ 3 kg/Sqm and filling the surface with cement plaster 1:3 one or two layer as reqd or PCC 1:2:4 as directed by Engr-in-Charge with or without facia and smooth finished and smotth edges incl two coats of finished to match with the existing surface at any height and in any situation including necessary form work complete all as specified and directed.

M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes incl demolition complete all as spd and directed.

M&L for non skid ceramic coloiured tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors incl dismantling tiles etc complete all as specified and directed.

-ditto- all as per above item but here- in area of each tile exe 0.11 sqm but n.exe 0.18 sqm, in floors & dado etc complete all as specified and directed.

M& L for Glazed ceramic jointless light/coloured group of size exc 0.13sqm but n.exc 0.18 sqm area of each tiles and thicknes of wall tile not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, incl dismantling tiles etc complete all as spd and directted. Note : shade & design as approved by EIC/GE complete all as specified.

M&L for Virified tiles light shade /dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm , in floors, dado , skirting etc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling tiles etc complete all as spd and directed.

M&L for 20 to 25 mm thick Kota stone slab (Machine cut) of any size laid over and incl 20mm thick bedding layer in cement mortar 1:6 over neat cement slurry @ 3Kg/sqm over sub base , jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring /steps/ riser / skirting incl dismantling stone slabs etc complete all as spd and directed.

M&L for marble 15-17 mm (green/any colour shade approved by EIC) thick over cement screed bed laid on 15 mm thick CM 1:6 and jointed with grey cement slurry mixed with pigment ot match the shade to flooring / staircase / steps,riser incl rubbing and polishing incl rounding to edge of marble and incl dismantling complete all as specified and directed.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling complete all as spd and directed.

M & L for 75 mm thick PCC 1:4:8 type D-2 (using 20 mm agg. ) in hardstanding/path/sub base of flooring incl demolition complete all as spd and directed.

M & L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm agg. ) as in plinth protection / path/ any paved area incl demolition complete all as spd and directed.

M&L for anodised aluminium framed work for door, window / vent (powder coated) aluminium section weighting 0.55kg/RM with one or more rebated incl jointed cleat for fixing etc complete all as specied and directed

M&L for anodised aluminium powder coated door shutter , aluminium section weighting not less than 0.55kg/RM incl necessary 4.8mm th sheet glass ordinary quality / frosted glass or ACP sheet incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts,1xdoor stoper,1xHydralic door closer with each shutter any type incl taking down complete all as specified all as specified.

M&L for anodised aluminium powder coated window and ventilator shutters, aluminium section weighting not less than 0.55kg/RM incl necessary 4.8mm th sheet glass ordinary quality glass/ frosted incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts complete all as spd and directed.

M&L for aluminium Anodized powder coated fixed frame of partiton or fixed window / ventilator , aluminium section weighting not less than 0.55kg/RM incl 4.8mm thick sheet glass oridinary quality ' frosted glass or ACP sheet joining with rubber beading , aluminium snap beading complete all as specifed & directed

S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples complete all as spd and directed

M&L for 4.8 mm thick float glass ordinary quality' frosted glass and glazing with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane in repair complete all as specified.

M&L for providing & fixing False ceiling with Gypsum based ceiling tiles and frame work (with aluminum foil on one side) of size 595 x 595 mm of thickness not less than 9 mm including with GI powder coated frame angle /tee grid frame work for ceiling with following specfication (a) S&F Angle of side 25x25x1mm powder coated (b) 25x25x1 mm GI powder coated at Bottom tee as in main member (c) 25x25x1 mm thick GI powder coated at bottom tee as ibn cross members (d) S&F 1.6mm dia GI wire suspenders alongwith adjustable clamps to maintains leveling inculding fixing to ceiling fasteners & dismantling of walls and ceiling board any type complete all as spd and directed.

M&L for pressed steel frames of size 105mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets including necessary fixing lugs, butt hinges (100mm medium weight-03 Nos), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6, incl taking down old frame/chowkat complete all as spd and directed.

-ditto- all as per above item but here-in size of frame 125mmx60mm for doors complete all as specified.

S&F for 35mm thick flush shutters, solid core construction, with particle board core and plywood face panels, and both faces is prelaminated with decorative face veneer with lipping/frame to match as approved by EIC & incl taking down old shutter complete all as specified and directed.

S&F for 2nd class H.W. glazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.23(b) and fitted to chowkahts incl stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads & taking down old shutter etc complete all as specified.

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl taking down old shutter & 3Nos- 100mm Aluminium hinges for each shutter complete all as specified and directed .

S & F for mild steel framed work as in grill, guard bars etc with ends of bars/FI shoulders and or riveted or forged in to spikes, framed guard bar and similar works confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S & F in repair for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed.

S & F in repair 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5 sqm in each pane incl hacking out old broken glass from metal frame incl punching or drilling out old glazing pins/spring clips and glazed with oil putty complete all as specified and directed.

S&F for MS butt hinges, medium weight, cold rolled mild steel 100mm long (ISI Marked) with welded or complete all as specified and directed.

S&F for aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed.

S&F for aluminum handles cast type anodized 150mm long (ISI Marked) complete all as specified and directed.

S&F for 250mm long aluminium alloy, anodised, sliding door bolt of 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F in repair, 150 mm ordinay rat tail rod pattern springs incl roller and rabber plate fixed to chowkhats in repairs incl necessary welding if reqd. complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on wooden new surfaces of any description over 10cm width or girth incl preparation of new surfaces complete all as specified and directed.

M&L for 18mm thick water proof solid MDF Board prelaminated both sides of approved shade fitted with necessary arrangement as in kitchen cabinet back sides, partition, shutters and shelves, etc., fixed with solvent cement adhesive and stainless steel screws and providing 1mm thick PVC lipping to exposed edges, complete all as specified and as directed.

M&L for extruded brass handle, fancy type as approved by the GE, polished, 150mm long (ISI marked), complete all as specified.

M&L for continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30mm, complete all as specified.

M&L for magnetic catcher suitable for any shutters, complete all as specified.

S&F for Vitreous China wash down water closet pan (pedestal pattern) with trap, white (excluding fixing bolts, flushing cistern and flush pipe) incl connection to drain and flushing pipe in repairs complete all as spd and directed.

S&F of PVC flushing cistem low level white with all accessories of 10 ltrs capacity incl flushing pipe, brackets and taking down of old CI/PVC flushing cistern in repairs complete all as specified and directed.

S&F for Vitreous China wash basin (Pedestal pattern), White, flat back, size 550x400 mm incl brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs complete all as specified

S&F wash hand basin table top of size 460x460x170 mm vitrous China including CP waste coupling & PVC waste pipe of 32 mm dia etc in repair complete all as specified and directed. Make Jaquar cat part No - JDS-WHT-25935 or equalent make as per list of makes attached.

S&F for vitreous China, wash hand basin, counter top, white, of size 530mmx445mmx195mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs, complete all as specified. Make: Jaquar Cat Part No. ECS-WHT-601 or equivalent. as per list of makes attached.

S&F for One piece closet with bowl for cupled WC with PP soft seat cover, hinges fixing accessories and accessories set of size 360mmx680mmx765mm, strap 220mm cistern with cistern fittings and necessary fixing fittings complete, fixed in repairs, complete all as specified. Make: Jaquar Cat Part No. CNS-WHT-755SS or equivalent as per list of makes attached.

S&F for wall mixer with provision for overhead showes with 115mm long bend pipe on upper side, connecting legs and wall flanges, in repairs complete all as specified and directed. Make: Jaquar Cat Part No. CON 273KNUPR or equivalent as per list of makes attached.

S&F for CP brass Centre hole mixer without pop up waste system 15mm bore for mixing hot and cold water screwed down for iron pipe for WHB, in repairs complete all as specified. Make: Jaquar Cat Part No. CON-167KNV or equivalent as per list of makes attached.

S&F for Sink mixer with regular spout wall mounted with connecting legs and wall flanges and including all necessar fitting, complete all as specified.Make: Jaquar Cat Part No. CON 319KN or equivalent. as per list of makes attached.

S&F for Soap tray brass chromium plated and fixed to plugs on wall with brass screws, complete all as specified. Make: Jaquar Cat Part No. ACN 1131N or equivalent as per list of makes attached.

S&F for Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified.Make: Jaquar Cat Part No.ACN 1111SM or equivalent. as per list of makes attached.

S&F for Towel ring brass chromium plated, fixed with brass screws and plugs, complete all as specified. Make: Jaquar Cat Part No. ACN 1121N or equivalent as per list of makes attached.

S&F for Brass chromium plated shower rose of 200mm size with arm and with or without swivel joints, complete all as specified. Make: Jaquar Cat Part No. OHS 1779 for shower and SHA 49483 for arm or equivalent as per list of makes attached.

S&F for Toilet paper holder,stainless steel, fixed with and including chromium plated brass screws and and wooden/plastic cleats on walls, complete all as specified. Make: Jaquar Cat Part No. AKP 35753PS or equivalent as per list of makes attached.

S&F for Health faucet brass CP with 8mm dia 1.2 mtr long flexible pipe and wall hook fixed with brass chromium plated screws, complete all as specified. Make: Jaquar Cat Part No. ALD CHR-573 or equivalent as per list of makes attached.

S&F for Corner glass shelf 200mm (brass brackets), fixed with brass screws and plugs, complete all as specified. Make: Jaquar Cat Part No. ACN 1173 or equivalent as per list of makes attached.

S & F for Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe in repairs complete with all fittings all as specified and directed. Make: Jaquar or equivalent as per list of makes attached.

S & F in repair Stop cock /angle CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed. Make: Jaquar or equivalent as per list of makes attached.

S & F in repair Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed.

S& F for swan neck pillar cock fancy type chromium plated screw with iron pipe incl all fittings in repairs complete all as specified and directed.

S&F for PVC connections 60cm long superior quality with PTMT nut on both sidecomplete all as specified and directed.

S&F in repair grating round 125mm size of CP complete all as specified and directed.

S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 500 ltr capacity, hoisted and fixed in any position incl 20 mm dia ball float valve with aluminium fitting, GI nipple and any fitting ,dismantling existing water tank complete all as specified and directed.

S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 1000 ltr capacity, hoisted and fixed in any position incl 20 mm dia ball float valve with aluminium fitting,GI nipple and any fitting , tank cover dismantling existing water tank complete all as specified and directed.

-ditto- all as per above item but here-in-before refixing in same/ other position complete all as specified.

Taking up or down 15 mm dia bore steel tubing and connection complete all as specified and directed.

S&F for GI tubing 15mm bore medium grde with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in CM 1:3 to facings where required, incl 10cm exc but not exc 20cm in girth all as directed and specified.

S&F GI tubing 15 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Fixing only in repair steel tubing and connection 15 mm dia bore to wall and laid in floors complete all as specified and directed.

Taking up or down 20 mm dia bore steel tubing and connection complete all as specified and directed..

S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Fixing only in repair steel tubing and connection 20 mm dia bore to wall and laid in floors complete all as specified and directed.

Taking up or down 25 mm dia bore steel tubing and connection complete all as specified and directed..

S&F GI tubing 25 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Fixing only in repair steel tubing and connection 25 mm dia bore to wall and laid in floors complete all as specified and directed.

S&F for Gun-metal globe or gate valves of 20mm bore , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. .

M&L for 15mm thick plastering on roof surface in CM 1:4 surface finished even and smooth without using extra cement, complete all as specified.

M&L for priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 Ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20Kg/Sqm and thereafter proviging polmeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm, having a centre core of 90 micron high molecular density polyethlene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/sqm, incl taking down exsting roof treatment complete all as specified & directed.

M&L for Chicken wire mesh of size 12.5 mm and wire dia 0.51 mm (24 SWG) hexagonal construction, stretched firmly for roof treatment, complete all as specified.

M&L for PCC (1:2:4) nominal mix, type B-0, using 12.5mm graded stone aggregate in roof padding and surface finished even and smooth without using extra cement, complete all as specified.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, with grey cement, pigment incl dismantling complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified.

M&L for factory made pre-cast cement concrete block type B1, 1:2:4 as in kerb stone made to shape as directed, exc. 10 cm in width and setting in mortar 1:4, complete all as specified and as directed.

M & L for prepolished precast concrete designer tiles size 300x300x10mm with grey cement & pigment, outdoor /parking design in floors, roof etc set and jointed with grey cement slurry, over & incl 20 mnm thick cement mortar (1:4) screed incl dismantling of old tiles complete, all as specified. Make : Somany/Kajaria/Johnson Endura etc

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and complete all as directed and specified.

S&F for expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixed with galvanized steel staples supplied and fixed complete to wood or steel member, weight exc 4 kg per Sqm complete all as specified and directed.

M&L for framed work such as grills, gratings,framed guard bars, walk ways, railings; framework of water tanks, cooler stand ,rafters & purlins etc work conforming to Fe.290.Gde-E-16, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as directed and specified.

S&F for 25 mm dia decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories complete all as specified and directed. Note: the cost of brackets and knobs is deemed to be incl in the quoted rate.

S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and MS ring (25x6 FI used) bolt at every 1.5 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.

S&F for 110mm bore PVC bends/junction any radius complete all as specified and directed. .

S&F for 110mm bore PVC bends/junction with access door any radius complete all as specified and directed. .

S&F for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. .

S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .

S&F for 75 mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.

'Ditto all as per ser item No above but laid in trench or in floor

S&F for 75 mm bore PVC bends/junction any radius complete all as specified and directed. .

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring aluminium/ copper from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets,bell push , ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

M & L for concealed point wiring on wall and ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following:-

One light /Fan/Bell point controlled by one switch 6/5 Amp one way single pole.

One 3 pin socket outlet 6/5 Amps controlled by one switch on the same board with other switches.

One 3 pin 6/5 Amp socket outlet controlled by one switch independent board.

One 3 pin 6/5 Amp socket outlet controlled by one switch independent board but below/ side the switch board of light point in same vertical / horzintal plane.

All as per item No 118 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

Taking down old unserviceable/deteriorated point wiring aluminium/ copper (excluding PVC conduit) from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets,bell push , ceiling rose, pendants, Holders sunken box, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

M&L for drawing the wire in existing conduit steel/PVC, concealed / surface ,complete with point wiring with FR PVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm, 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly in and sunken terminal boxes pressed MS/GI steel terminal boxes not less than 1.20 mm thick for mounting switch, socket etc including 3 mm thick Hylam brand sunmica laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed surface with cement mortar ratio of 1:3 and matching surface with existing white/colour wash, oil bound or cement base paint etc to match with existing surface complete all as specified and directed and suitable for the following: -

one light, fan, call bell point controlled by one switch

-Ditto- all as per item No 121 here-in-before but For one socket point 6 Amps controlled by one switch on same board

-Ditto- all as per item No 121 here-in-before but for 5 Amp independent socket point controlled by one switch

One 3 pin 6/5 Amp socket outlet controlled by one switch independent board but below/ side the switch board of light point in same vertical / horzintal plane.

All as per item No 121 here-in-before but in exsiting concealed/surface PVC conduit for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

S&F as replacement Angle lamp /batten holder fixed on wall /ceiling all as approved and directed by Engineer-in-charge.

S&F in replacement of old bulk head fitting by exterior application IP 66 protection bulk head fitting LED 10 watt alongwith housing LED Panel/Lamp weather proof outdoor type alongwith covered with transparent clear sheet all as specified and directed

S&F in replacement of old sketch fitting/any type by decorative wall mounted LED lamp 12 watt (white/ warm) complete all as specified and directed.

S&F Wall mounted LED batten 20 Watt inbuilt LED panel (White/Yellow), extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver including dismantling taking down unsv FTL/LED fitting any type complete all as specified and directed.

S&F Wall mounted LED light fitting 2 feet long, 10 Watt 220V decorative type White/Yellow incl integrated electronic driver and connecting up with three core flexible copper conductor including dismantling taking down unsv sketch fitting any type complete all as specified and directed.

S&F LED building security light 15 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade suitable size dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismentling taking down unsv fitting any type all as specified and directed.

Supply and fixing in replacement of Mirror optic fitting by recess/surface mounted mirror optic LED luminaire fitting with paralite P5 louvers 35/36 watt LED, 6500 K, dimention 600mm x 600mm fitting for grid type ceiling including control driver and other accessories complete all as specified and directed.

Supply & Fixing as replacement medium step type fan regulator 80 Watt, 240 Volt AC, socket size, medium step" ISI marked complete all as specified and directed.

S&F as replacement Ding dong sound door call bell electric AC 240 volt, 50 Hz ding dong type including taking down unserviceable complete all as specified and as directed.

S&F as replacement ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified and as directed.

S&F as replacement switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified and as directed.

S&F as replacement switch piano flush type (ISI marked), single pole, one way 16/15 Amps, 240 Volts including complete all as specified and as directed.

S&F as replacement socket outlet 3 pin, 6 Amp piano flush type including complete all as specified and as directed.

S&F as replacement socket outlet, 2 in 1, 3/5 pin 6 / 16 Amp, piano flush type complete all as specified and as directed

S&F as replacement bell push 5/6 Amps SP flush type complete all as specified and as directed.

M&L as replacement for modular fan regulator stepped type with frame plate flush type for 2 modules complete all as specified & directed

M&L as replacement for modular snap switch,single pole,one way,6 Amp suitable for 1 module complete all as specified & directed

M&L as replacement for modular snap switch,single pole,one way,16 Amp suitable for 1 module complete all as specified & directed

M&L as replacement for modular bell push,single pole,one way,6 Amp suitable for 1 module complete all as specified & directed

M&L as replacement for modular snap Socket outlet,5pin,6 Amp flush type suitable for 2 Module complete all as specified & directed

M&L as replacement for modular snap Socket outlet, 2 in 1 pin,6/16 Amp flush type suitable for 2 Module complete all as specified & directed

M&L as replacement for modular white cover plate with frame for 1 module complete all as specified & directed

M&L for modular white cover plate with frame for 2 module complete all as specified & directed

M&L as replacement for modular white cover plate with frame for 3 module complete all as specified & directed

M&L for modular white cover plate with frame for 4 module complete all as specified & directed

M&L as replacement for modular white cover plate with frame for 6 module complete all as specified & directed

M&L for modular white cover plate with frame for 8 module complete all as specified & directed

M&L as replacement for modular white cover plate with frame for 12 module complete all as specified & directed

M&L for modular flush box for 1/2 module complete all as specified & directed

M&L as replacement for modular flush box for 3 module complete all as specified & directed

M&L as replacement for modular flush box for 4 module complete all as specified & directed

M&L as replacement for modular flush box for 6/8 module complete all as specified & directed

M&L as replacement for modular flush box for 12 module complete all as specified & directed

M & L for sub main wiring in replacement of worn out aluminium conductor wire with two run of FRLS PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 Sqmm, 1100 Volts grade and one run of 4.00 Sqmm FR PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments and drawing in PVC rigid conduit , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing complete in all respect all as specified and directed. Note :- 1. Two run of single core cable with one run of contineous earth wire of copper conductor wire Flexible (Multistrand) of FRLS PVC insulated shall be measured and paid as one unit length. 2. PVC conduit pipe with fitting shall be measured and paid separately .

M & L for sub main wiring in replacement of worn out aluminium/Copper conductor wire with two run of FRLS PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 Sqmm, 1100 Volts grade from Main Board to Energy Meter drawing in PVC conduit , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing complete in all respect all as specified and directed. Note :- 1. Two run of single core cable of copper conductor wire Flexible (Multistrand) of FRLS PVC insulated along with PVC flexible tube deemded to be included as one unit length.

M & L for sub main wiring in replacement of worn out aluminium conductor wire with two run of FRLS PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 4.0 Sqmm, 1100 Volts grade and one run of 2.5 Sqmm FR PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments and including draw in PVC rigid conduit 25 mm dia , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing colour (distumber, Oil bound, Samosem etc ) complete in all respect all as specified and directed. Note :- 1. Two run of single core cable with one run of contineous earth wire of copper conductor wire flexible (Multistrand) of FRLS PVC insulated shall be measured and paid as one unit length 2. PVC conduit pipe with fitting shall be measured and paid separately .

Supplied and fixing in replacement PVC conduit by Non Metallic Rigid PVC conduit, ISI Marked, conforming to IS 9537, medium grade of size 25 mm dia including all fittings like bends, elbow reducer, junction boxes, tee bell mouth all fixing accessories such as coupler lock, nuts, saddles pipe hooks etc complete including Cutting & Chasing required on brick wall not exceeding 10 CM girth for concealed conduit wiring and making good to disturbed surface with cement mortar 1:3 and distemper / colour wash etc to match with existing surfaces including facing / finishing complete all as specified and directed.

S & F service connection with twin core 10 Sqmm 240 volt heavy duty un armured PVC insulated solid aluminium conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than one metre apart including 4mm GI supporting wire of suitable size in replacement of old unseriveable conductor cable complete.

S & F service connection with twin core 6 Sqmm 240 volt heavy duty un armured PVC insulated solid aluminium conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than one metre apart including 4mm GI supporting wire of suitable size in replacement of old unseriveable conductor cable complete.

Supply and fixing as in repair Metal clad socket outlet with single pole and nuetral enclosure with two pin and earth plug socket complete with one single pole MCB 20 Amps complete all as specified and directed by EIC.

Supply & Fixing in replacement of DB by SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way complete all as specified and directed.

Supply & Fixing in replacement of DB by SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way complete all as specified and directed.

Supply & Fixing in replacement of DB by SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 12 way complete all as specified and directed.

Supply & Fixing in replacement of DB by TPN Distribution Box 4 way double door of protection grade IP 43 fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of way, confirming to IS 13032 & 8623 including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed.

supply and fixing as replacement of MCCB 125 Amps 16 KA with fixed thermal magnetic release frame 4pole all as specified and directed.

supply and fixing as replacement of MCCB 100 Amps 16 KA with fixed thermal magnetic release frame F2 optim 1.0 , 4pole all as specified and directed.

Supply & Fixing as replacement MCB SPN, 5 to 40 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

Supply & Fixing as replacement MCB SP, 06 to 40 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked complete all as specified and directed.

Supply only MCB TPN, 63 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and complete all as specified and directed.

Supply and fix as in replacemtn of 3 Pin Plug Top 16A, White/Black 240V|3 Pin Top complete all as spd and directed.

Supply and Fix LED lamp 10 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismentling taking out unsv CFL/LED Bulb.

Supply and Fix LED lamp 15 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismentling taking out unsv CFL/LED Bulb.

Taking out old unsv electric meter and deposit to E/M store and S&F for enrgy meter single phase 1x240volts electronic type temper proof LCD display with polycarbonate cover 230V, 10 - 60 Amps accuracy class - I 50Hz,,confirming to IS 13779,IP-54,with parameters to show data,time,current reading,load,PF,voltage and KWH single phase all as specified and direcetd and taken on charge by department in respective ledgers.

Taking out old unsv electric meter and deposit to E/M store and S&F for enrgy meter three phase 3x240volts electronic type temper proof LCD display with polycarbonate cover 415V, 10 - 60 Amps accuracy class - I 50Hz,,confirming to IS 13779,IP-54,with parameters to show data,time,current reading,load,PF,voltage and KWH three phase all as specified and direcetd and taken on charge by department in respective ledgers.

S&F Exhaust fan AC single phase 230 volts for size 300 mm sweep, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as spd and directed inluding removing and dismentaling of old UNSV ex fan any type and size and deposited it in MES Store yard or as directed and new exhaust fan will be taken in charge of respective ledgers. .

S&F Ceiling Fan AC single phase 230 volts for size 1200 mm sweep, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as spd and directed. inluding removing and dismentaling of old UNSV fan any type and size and deposited it in MES Store yard or as directed

S&F Exhaust fan AC single phase 230 volts for size 200 mm sweep Plastic body along with louvers, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as spd and directed. inluding removing and dismentaling of old UNSV ex fan any type and size and deposited it in MES Store yard or as directed.

PVC insulated, PVC sheathed twin flat core 1100 volts grade, 4 sqmm aluminium conductor from OH conductor or from junction box to street/security light incl taking down old unserviceable cable all as specified and directed.

Supply & fix Electric Storage water heater of capacity 25 Ltr , 230 V energy efficient complete all as specified and directed and taken on charge by department in respective ledgers..

S&F Exhaust fan AC single phase 230 volts for size 250 mm sweep plastic body along with louvers, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as spd and directed. inluding removing and dismentaling of old UNSV ex fan any type and size and deposited it in MES Store yard or as directed.

M&L for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).

Supply and fix as in repair of Exhaust Fan iron louver for size 300 mm dia exhaust fan of shape (round/square) as directed.

DAVINDER SINGH

PARAS RAM ASGOTRA AND SONS

SHIVAE CONSTRUCTION