CONSTRUCTION OF CENTRAL STORE INSIDE SUKHOI ENGINE DIVISION

NAME OF WORK CONSTRUCTION OF CENTRAL STORE INSIDE SUKHOI ENGINE DIVISION

LINE NO. KPTCC/W/554

VALUE OF THE WORK (IN LAKHS) 804.33

NAME OF THE AGENCY

I EXPERIENCE DETAILS

A ONE WORK OF 80% VALUE ( IN LAKHS) 643.46

NAME OF THE WORK ISSUING AGENCY/ AURHORITY DATE OF ISSUE WORK ORDER VALUE ACTUAL WORK COMPLETED VALUE ACTUAL DATE OF COMPLETEION E-MAIL ID OF ISSUING AGENCY/ AUTHORITY CONTACT NO. OF OFFICE REMARKS

B TWO (02) WORKS OF 50% VALUE EACH ( IN LAKHS) 402.17

NAME OF THE WORK ISSUING AGENCY/ AURHORITY DATE OF ISSUE WORK ORDER VALUE ACTUAL WORK COMPLETED VALUE ACTUAL DATE OF COMPLETEION E-MAIL ID OF ISSUING AGENCY/ AUTHORITY CONTACT NO. OF OFFICE REMARKS

C THREE (03) WORKS OF 40% VALUE EACH ( IN LAKHS) 321.73

NAME OF THE WORK ISSUING AGENCY/ AURHORITY DATE OF ISSUE WORK ORDER VALUE ACTUAL WORK COMPLETED VALUE ACTUAL DATE OF COMPLETEION E-MAIL ID OF ISSUING AGENCY/ AUTHORITY CONTACT NO. OF OFFICE REMARKS

II DETAILS OF SOLVENCY CERTIFICATE

MINIMUM 40% OF ESTIMATED COST ( IN LAKHS) 321.73

ISSUING BANK & BRANCH NAME CERTIFICATE NO. ISSUING DATE VALUE OF SOLVENCY VALID FROM VALID TO E-MAIL ID OF ISSUING BANK NAME & CONTACT NO. OF ISSUING OFFICIAL REMARKS

HINDUSTAN AERONAUTICS LIMITED

KORAPUT DIVISION

CENTRAL CONTRACT CELL

BILL OF QUANTITIES FOR THE WORK OF "CONSTRUCTION OF CENTRAL STORE INSIDE SUKHOI ENGINE DIVISION"

LINE NO : KPTCC/W/554

NAME OF THE AGENCY :

Sl. No. Description of work Quantity Unit Rate Amount

Annexure-A (CIVIL WORKS)

1 Earth work in excavation for all kind of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. etc. all complete as per specification and direction of Engineer In Charge. 1987.47 Cum ₹ 0.00

2 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing etc. all complete as per direction and specification of Engineer In Charge. 302.41 Cum ₹ 0.00

3 Providing and laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering all works upto plinth level etc. all complete as per direction of Engineer in charge. 302.41 Cum ₹ 0.00

4 Labour charges for Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. In layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and for all lift etc. all complete as per specification and direction of Engineer In Charge. 468.63 Cum ₹ 0.00

5 Carriage/removing of excavated Earth not exceeding 2.00 k.m. by mechanical transport including loading, unloading and stacking where directed etc. all complete as per specification and direction of Engineer In Charge. 1518.84 Cum ₹ 0.00

6 Providing and laying in position reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level etc. all complete as per specification and direction of Engineer In Charge. 583.53 Cum ₹ 0.00

7 Providing and laying in position reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, roof beams, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc. all complete as per direction of Engineer in Charge. 220.70 Cum ₹ 0.00

8 Providing and laying in position Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement etc. all complete as per direction of Engineer in Charge. 124.23 Cum ₹ 0.00

9 Supplying carrying to site all approved materials and placing in all positions steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. work including straightening, cutting,bending and binding up to and above plinth level etc. all complete as per specification and direction of Engineer In Charge. 120699.80 Kg ₹ 0.00

10 Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete etc. all complete as per direction of Engineer in charge. 359.03 Sqm ₹ 0.00

11 Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts etc. all complete as per direction of Engineer in charge. 644.52 Sqm ₹ 0.00

12 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers etc. all complete as per direction of Engineer in charge. 1387.63 Sqm ₹ 0.00

13 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform etc. all complete as per direction of Engineer in charge. 648.61 Sqm ₹ 0.00

14 Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases etc. all complete as per direction of Engineer in charge. 6.30 Sqm ₹ 0.00

15 Providing and laying in position cement concrete of 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources excluding the cost of centering and shuttering - All work up to plinth level etc. all complete as per specification and direction of Engineer In Charge. 4.50 Cum ₹ 0.00

16 Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) superstructure above plinth level up to floor five level etc. all complete as per specification and direction of Engineer In Charge. 320.49 Cum ₹ 0.00

17 Plastering with 15 mm thick cement plaster on the rough side of single or half brick wall, concrete work or any other surface of mix in cement mortar 1:4 (1 cement: 4 fine sand) etc. all complete as per specification and direction of Engineer In Charge. 5602.92 Sqm ₹ 0.00

18 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade over new work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) with preparation of surfaace etc. all complete as per specification and direction of Engineer In Charge. 2593.08 Sqm ₹ 0.00

19 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth etc. all complete as per specification and direction of Engineer In Charge. 1512.40 Sqm ₹ 0.00

20 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre over new work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour including preparation of surface etc. all complete as per specification and direction of Engineer In Charge. 3009.84 Sqm ₹ 0.00

21 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of 1.25mm thickness for rolling shutters with 80x1.25 mm M.S. laths including providing mechanical device chain and crank operation for operating rolling shutters exceeding 10.00 Sqm and upto 16.80 sqm in area .etc. all complete as per specification and direction of Engineer In Charge. 64.00 Sqm ₹ 0.00

22 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer using M.S. angels 40x40x6 mm for diagonal braces etc. all complete as per specification and direction of Engineer In Charge. 9.00 Sqm ₹ 0.00

23 Providing and fixing for fixed portion Powder coated (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws (Glazing, paneling and dash fasteners to be paid for separately) for fixed portion etc. all complete as per direction and specification of Engineer In Charge. 2136.36 Kg ₹ 0.00

24 Providing and fixing Powder coated (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) etc. all complete as per direction and specification of Engineer In Charge. 116.88 Kg ₹ 0.00

25 Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per specification and directions of Engineer-in-Charge. 88.56 Sqm ₹ 0.00

26 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) etc. complete as per specification and directions of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item) 56.70 Sqm ₹ 0.00

27 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality Upto 5 mm depth and 5 mm width etc. complete as per the direction of Engineer in-charge. 323.20 Rmt ₹ 0.00

28 Providing and fixing 125mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. all complete as per specification and direction of Engineer In Charge. 36.00 Each ₹ 0.00

29 Providing and fixing 300x10mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. all complete as per specification and direction of Engineer In Charge. 18.00 Each ₹ 0.00

30 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. all complete as per specification and direction of Engineer In Charge. 18.00 Each ₹ 0.00

31 Providing and fixing aluminium hanging Single rubber floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. all complete as per specification and direction of Engineer In Charge. 18.00 Each ₹ 0.00

32 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc. all complete as per specification and direction of Engineer In Charge. 18.00 Each ₹ 0.00

33 Providing and fixing 300x16mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. all complete as per specification and direction of Engineer In Charge. 18.00 Each ₹ 0.00

34 Manufacturing, supply, transportation and erection of Pre-Engineered steel Building and roof sheeting in complete including 01 No case ladder for roof access, Standard Eave gutter & down spouts at every column, 50mm thick rockwool insulation of density 48 kg/m3 with weld mesh for roof area, 0.5mm thick roof liner sheet below the roof, Crane bracket and beams for single girder EOT crane of capacity 5T, Canopy, sky lights, ridge vent, frames, build-up / HR section/ bracings with red oxide with two coat SE paint (01 coat in plant and 2nd coat at site), Pre-galvanized purlin / Girts, HD anchor bolt of required size, etc. as per the direction of Engineer-in-charge. From the reputed manufacturer like KIRBY, INTERARCH, LLOYDS. 143000.00 Kg ₹ 0.00

35 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete as per specification and direction of Engineer In Charge. 5777.20 Kg ₹ 0.00

36 Supplying at site welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately) etc. all complete as per specification and direction of Engineer In Charge. 2418.00 Kg ₹ 0.00

37 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade etc. all complete as per direction of Engineer in charge. 84.00 Sqm ₹ 0.00

38 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete etc. all complete as per specification and direction of Engineer In Charge. 652.86 Sqm ₹ 0.00

39 Providing and laying Glazed matt/antiskid finish Vitrified tiles in floor of size 600mmx600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily etc. all complete as per direction of Engineer in charge. 476.00 Sqm ₹ 0.00

40 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. 10.08 Sqm ₹ 0.00

41 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge 30.00 Rmt ₹ 0.00

42 Providing and fixing IS : 12817 marked 100X58X1.90 mm stainless steel butt hinges with stainless steel screws etc. all complete as per specification and direction of Engineer In Charge. 18.00 Each ₹ 0.00

43 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 6.00 Each ₹ 0.00

44 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 etc. all complete as per specification and direction of Engineer In Charge. 6.00 Each ₹ 0.00

45 Providing and fixing 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) etc. all complete as per specification and direction of Engineer In Charge. 5.00 Each ₹ 0.00

46 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 etc. all complete as per specification and direction of Engineer In Charge. 6.00 Each ₹ 0.00

47 Providing and fixing White Vitreous China Wash basin with pedestal size 630x450 mm with a single 15 mm C.P. brass pillar taps with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require etc. all complete as per specification and direction of Engineer In Charge. 5.00 Each ₹ 0.00

48 Providing and fixing Rectangular shape 453x357 mm mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing etc. all complete as per specification and direction of Engineer In Charge. 5.00 Each ₹ 0.00

49 Supplying and fixing Vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with intigral foot rest & including connection to trap & to flushing pipe, anti-syphonage pipe etc complete including bedding layer etc. all complete as per specification and direction of Engineer In Charge. 2.00 Each ₹ 0.00

50 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid of 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required etc. all complete as per specification and direction of Engineer In Charge. 4.00 Each ₹ 0.00

51 Providing and fixing 15 mm nominal bore with 450 mm length unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour etc. all complete as per specification and direction of Engineer In Charge. 11.00 Each ₹ 0.00

52 Providing and fixing 10 litre capacity - White P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures etc. all complete as per specification and direction of Engineer In Charge. 6.00 Each ₹ 0.00

53 Providing and fixing 32mm dia. Semi rigid P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings etc. all complete as per specification and direction of Engineer In Charge. 11.00 Each ₹ 0.00

54 Providing and fixing on wall face unplasticised Rigid 110mm bore dia. PVC rain water Single socketed pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all complete as per direction of Engineer in charge. 60.00 Rmt ₹ 0.00

55 Providing and fixing on wall face unplasticised Rigid 75mm bore dia. PVC rain water Single socketed pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all complete as per direction of Engineer in charge. 60.00 Rmt ₹ 0.00

56 Providing and fixing on wall face unplasticised - 110mm bore PVC moulded bend 87.5° for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all complete as per direction of Engineer in charge. 20.00 Each ₹ 0.00

57 Providing and fixing on wall face unplasticised - 75mm bore PVC moulded bend 87.5° for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all complete as per direction of Engineer in charge. 30.00 Each ₹ 0.00

58 Providing and fixing on wall face unplasticised - PVC moulded Single tee 110x110x110 mm bore dia. without door for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all complete as per direction of Engineer in charge. 7.00 Each ₹ 0.00

59 Supplying and fixing 110 mm size PVC (SWR) P trap shall having ISI mark etc. all complete as per direction of Engineer in charge. 6.00 Each ₹ 0.00

60 Supplying , carrying to site all approved materials and fixing CP self closing 15mm size angle cock presmatic or urinal valve auto closing system with built in control cock with wall flange and 200 mm or nearer connecting pipe of stainless teel of IS mark etc. all complete as per direction of Engineer in charge. 6.00 Each ₹ 0.00

61 Providing and laying Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge 544.70 Sqm ₹ 0.00

62 Providing edge moulding to 18 mm thick Granite work stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineerin- Charge 45.00 Rmt ₹ 0.00

63 Providing and fixing tiled false ceiling of 12.5 mm thick square edge PVC Laminated Gypsum Tile false ceiling of size 595x595 mm made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 450.00 Sqm ₹ 0.00

64 Providing and fixing 100x100 mm size P type square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 etc. all complete as per specification and direction of Engineer In Charge. 4.00 Each ₹ 0.00

65 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank etc. all complete as per specification and direction of Engineer In Charge. 2000.00 Ltr ₹ 0.00

66 Providing and fixing Granite Stone of approved shade with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) finished smooth finish etc. all complete as per specification and direction of Engineer In Charge. 5.76 Sqm ₹ 0.00

67 Providing and fixing 25 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints for internal works for exposed surface etc. all complete as per direction of Engineer in Charge. 60.00 Rmt ₹ 0.00

68 Providing and fixing 15 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints for internal works for exposed surface etc. all complete as per direction of Engineer in Charge. 50.00 Rmt ₹ 0.00

69 Providing and fixing 20 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints for internal works for exposed surface etc. all complete as per direction of Engineer in Charge. 25.00 Rmt ₹ 0.00

70 Providing Nahani gratting of 100mm dia etc. all complete as per direction of Engineer in Charge. 3.00 Each ₹ 0.00

71 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth etc. all complete as per specification and direction of Engineer In Charge. 168.00 Sqm ₹ 0.00

72 Providing and fixing M.S. tube hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer etc. all complete as per specification and direction of Engineer In Charge. 1116.39 Kg ₹ 0.00

73 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer, fixed to openings /wooden frames with rawl plugs screws etc. all complete as per specification and direction of Engineer In Charge. 2754.00 Kg ₹ 0.00

74 Painting with synthetic enamel paint with two or more coats on new work over an under coat of suitable shade with ordinary paint primer of approved brand and manufacture of required colour to give an even shade with preparation of surface etc. all complete as per specification and direction of Engineer In Charge. 601.79 Sqm ₹ 0.00

Sub Total Annexure-A ₹ 0.00

Annexure-B (ELECTRICAL WORKS)

1 Supply of PVC insulated and PVC sheathed/XLPE Power cable of 1.1 KV grade of 3.5C X 300 Sqmm XLPE Al. Ar. Cable 500.00 Mtrs. ₹ 0.00

2 Supply of PVC insulated and PVC sheathed/XLPE Power cable of 1.1 KV grade of 3.5C X 50 Sqmm XLPE Al. Ar. Cable 100.00 Mtrs. ₹ 0.00

3 Supply of PVC insulated and PVC sheathed,XLPE Power cable of 1.1 KV grade of 4 C X 25 Sqmm XLPE Al. Ar. Cable 200.00 Mtrs. ₹ 0.00

4 Supply of PVC insulated and PVC sheathed,XLPE Power cable of 1.1 KV grade of 4 C X 16 Sqmm XLPE Al. Ar. Cable 250.00 Mtrs. ₹ 0.00

5 Supply of PVC insulated and PVC sheathed,XLPE Power cable of 1.1 KV grade of 4 C X 10 Sqmm XLPE Al. Ar. Cable 600.00 Mtrs. ₹ 0.00

6 Laying of one number of PVC insulated and PVC shealhed / XLPE power cable of 1.1 KV grade of 3.5C X 300 Sq. mm Al.Ar in the existing masonnary open duct as required 220.00 Mtrs. ₹ 0.00

7 Laying of one number of PVC insulated and PVC shealhed / XLPE power cable of 1.1 KV grade of 3.5C X 300 Sq. mm Al.Ar Direct in ground including excavation, sand cushing protection covering and refilling the trench etc as required. 140.00 Mtrs. ₹ 0.00

8 Laying of one number additional PVC insulated and PVC shealhed / XLPE power cable of 1.1 KV grade of 3.5C X 300 Sq. mm Al.Ar Direct in ground in the same trench in on tier horizontal formation including excavation, sand cushing protection covering and refilling the trench as required. 140.00 Mtrs. ₹ 0.00

9 Laying and Fixing of one number PVC insulated & PVC shealhed / XLPE power cable of 1.1 KV grade of 3.5C X 50 Sq.mm on wall surface as required (clamped with 25 X 3mm ms flat clamp) 100.00 Mtrs. ₹ 0.00

10 Laying and Fixing of one number PVC insulated & PVC shealhed / XLPE power cable of 1.1 KV grade of 4C X 25 Sq.mm on wall surface as required (clamped with 25 X 3mm ms flat clamp) 200.00 Mtrs. ₹ 0.00

11 Laying of one number PVC insulated & PVC shealhed / XLPE power cable of 1.1 KV grade of 4C X 16 Sq.mm in the existing masonnary duct as required 250.00 Mtrs. ₹ 0.00

12 Laying of one number PVC insulated & PVC shealhed / XLPE power cable of 1.1 KV grade of 4C X 10 Sq.mm in the existing RCC/Hum/Metal pipe as required 600.00 Mtrs. ₹ 0.00

13 Supply and making end termination with brass compression gland and Alluminium lugs for 3 1/2 C X 300 Sq.mm XLPE cable (70 mm) 4.00 Nos. ₹ 0.00

14 Supply and making end termination with brass compression gland and Alluminium lugs for 3 1/2 C X 50 Sq.mm XLPE cable (35 mm) 4.00 Nos. ₹ 0.00

15 Supply and making end termination with brass compression gland and Alluminium lugs for 4 C X 25 Sq.mm XLPE cable (28 mm) 8.00 Nos. ₹ 0.00

16 Supply and making end termination with brass compression gland and Alluminium lugs for 4 C X 16 Sq.mm XLPE cable (28 mm) 2.00 Nos. ₹ 0.00

17 Supply and making end termination with brass compression gland and Alluminium lugs for 4 C X 10 Sq.mm XLPE cable (25 mm) 32.00 Nos. ₹ 0.00

18 Supply, installation, testing and commissioning of LT panel board with I/C 630 A TP MCCB-02 nos(for main source and DG source) and 630Amp Bus coupler 01 nos. out going-200 Amp TP MCCB 01 nos. 160 Amp TP MCCB-2 nos., 125 Amp TP MCCB-3 nos. 63 Amp TP MCCB-6 no., 32Amp TP MCCB-5 nos. with O/L & S/L protection having metering CKT of voltmeter with MCB, with accessories sprader terminal must be provided for making its suitable for termination for suitable cable.and Supply of Testing equpment ( Mager 1000 volt, hand operated Manual type with testing prods with Calibration Certificate,Light Meter (Lux) measuring Range up to 200000 lux or 20000 Foot Candle,Digital Clamp meter measure AC Current to 1000 amp quantity each 01 no. and Cable drum lifting Jack Capacity min.10 Ton qty. 1 set. 1.00 No. ₹ 0.00

19 Supply and fixing of 8 way (4 + 24) double door surface / recess mounting vertical type 415V TPN MCB DB of sheet steel, dust Protected duly powder painted inclusive of 200A tinned copper busbar, common neutral link earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. 2.00 Nos. ₹ 0.00

20 Supply and fixing of 6 way (4 + 18) double door horizontal type (Three pole and neutral, sheet steel, MCB DB 415V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, inter connection, powder painted including earthing etc. as required (But without MCB / RCB / Isolator) (Suitable for LDB) 2.00 Nos. ₹ 0.00

21 Supply and fixing of 6 way (4 + 12) double door horizontal type (Three pole and neutral, sheet steel, MCB DB 415V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection, powder painted including earthing etc. as required (But without MCB / RCB / Isolator) (Suitable for PDB) 2.00 Nos. ₹ 0.00

22 Supply and fixing of 6 way double door single pole & neutral sheet steel MCB DB, 240 V. on surface / recess, complete with tinned copper bus bar, neutral bar, earth bar, din bar, interconnection, powder painted including earthing etc. as required (But without MCB / MCCB / Isolator) for ELDB 1.00 No. ₹ 0.00

23 Supply and Fixing of 100 Amp Four pole 415 V , MCB in the existing MCB DB complete with connection testing and commissioning etc. as required 2.00 Nos. ₹ 0.00

24 Supply and Fixing of 63 Amp Four pole 415 V , MCB in the existing MCB DB complete with connection testing and commissioning etc. as required 4.00 Nos. ₹ 0.00

25 Supply and Fixing of 32 Amp TP, 415 V,10KA 'C' curve MCB switchable for inductive load in the existing MCB DB complete with connecting, testing and commissioning. 16.00 Nos. ₹ 0.00

26 Supply and Fixing of 40 A Double Pole, 240 V MCB/Isolator in the existing MCB DB equipment with connection, testing and commissioning. 12.00 No. ₹ 0.00

27 Supply and Fixing of 20 A SP, 240 V MCB/Isolator in the existing MCB DB equipment with connection, testing and commissioning. 24.00 Nos. ₹ 0.00

28 Supply and Fixing of 16 A SP, 240 V MCB/Isolator in the existing MCB DB equipment with connection, testing and commissioning. 36.00 Nos. ₹ 0.00

29 Supply and Fixing of 10 A SP, 240 V MCB/Isolator in the existing MCB DB equipment with connection, testing and commissioning. 6.00 Nos. ₹ 0.00

30 Supply and Fixing of 32 A DP, 240 V MCB/Isolator in the existing MCB DB equipment with connection, testing and commissioning. 1.00 Nos. ₹ 0.00

31 Supply & fixing TP sheet steel enclosure on surface/reecs along with 32A, 415 V, 'C' curve TP MCB complete with connection, testing, connection etc as required. 16.00 Nos. ₹ 0.00

32 Supply & fixing of 20A, 240 V, SPN ind type socket outlet with 2 Pole and earth metal enclosed plus top alongwith 20A'C' curve, SP, MCB in sheet steel enclosure on surface/recess with chined metal connector the socket outlet and component with connector. Supply & fixing following size modular GI Box along with Modular base & cover plate for modular switches in 10.00 Nos. ₹ 0.00

33 Supply & fixing of 1 module GI Box along with Modular base & cover plate for modular switches in recess. 10.00 Nos. ₹ 0.00

34 Supply & fixing of 3 module GI Box along with Modular base & cover plate for modular switches. 13.00 Nos. ₹ 0.00

35 Supply & fixing of 6 module GI Box along with Modular base & cover plate for modular switches. 3.00 Nos. ₹ 0.00

36 Supply & fixing of 8 module GI Box along with Modular base & cover plate for modular switches. 4.00 Nos. ₹ 0.00

37 Supply & fixing of 12 module GI Box along with Modular base & cover plate for modular switches. 2.00 Nos. ₹ 0.00

38 Supply & fixing 5/6 amp modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate. 60.00 Nos. ₹ 0.00

39 Supply & fixing 3 pin 5/6 amp modular socket on the existing modular plate & switch box including connections but excluding modular plate. 15.00 Nos. ₹ 0.00

40 Supply & fixing 15/16 amp modular switch on the existing modular plate & switch box including connections but excluding modular plate. 10.00 Nos. ₹ 0.00

41 Supply & fixing 6 pin 15/16 amp modular socket on the existing modular plate & switch box including connections but excluding modular plate. 10.00 Nos. ₹ 0.00

42 Supply of 1 X 40 Watt 2' X 2' Square type LED Panel light fitting with all accessories. 200.00 Nos. ₹ 0.00

43 Fixing of 1 X 40 Watt 2' X 2' Square type LED Panel light fitting with all accessories. 200.00 Nos. ₹ 0.00

44 Supply of 2 X 20 Watt LED tube light fittings with all accessories. 15.00 Nos. ₹ 0.00

45 Fixing of 2 X 20 Watt LED tube light fittings with all accessories. 15.00 Nos. ₹ 0.00

46 Supply of 1 X 200 Watt LED high way light fittings with all accessories. 50.00 Nos. ₹ 0.00

47 Fixing of 1 X 200 Watt LED high way light fittings with all accessories. 50.00 Nos. ₹ 0.00

48 Supply of 1 X 150 Watt LED street light fittings with all accessories. 15.00 Nos. ₹ 0.00

49 Fixing of 1 X 150 Watt LED street light fittings with all accessories. 15.00 Nos. ₹ 0.00

50 Supply, Installation, testing and commissioning of 1200 mm sweep. BEE 5 star rated ceiling fan with BLDC motor, class of Insulation, B, 3nos. Blades, 30 cm laying down rod-2 nos. canopies, lshake kit, salting rope, copper winding, power factor not less than 0.9. Service value (cm/m/w) minimum 600 Air delivery minimum 210 cum/min., 350 RPM (tolerence as per IS: 374-2019) THD less than 10% remote unit for speed control and all remaining accessories inclduing safety pin, nut bolts, washer temperature ring= 75 degree C (max.) insulation resistance more than 2 mega ohm. suitable for 230V single phase AC supply. 20.00 Nos. ₹ 0.00

51 Supply of 300mm sweep matalic Ex fan with all accessories 4.00 Nos. ₹ 0.00

52 Fixing of 300/450 mm Ex fan with all accessories (cutting the wall if required and making it good serviceable) 4.00 Nos. ₹ 0.00

53 Supply and Fixing of 25mm dia medium class PVC conduit along with all accessories like JB (1,2,3,4 way ) L-bow , T joint Base , saddle scrow etc in surface / recess including cutting the wall and making the same in case of recessed conduit as required 800.00 Mtrs. ₹ 0.00

54 Supply & drawing of 3R X 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required 800.00 Mtrs. ₹ 0.00

55 Supply & drawing of 3R X 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required 1500.00 Mtrs. ₹ 0.00

56 Supply & drawing of 3R X 4 sq.mm FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required 300.00 Mtrs. ₹ 0.00

57 Laying of 50mm Dia ms pipe with coupler and band in side the floor concrete. 200.00 Mtrs. ₹ 0.00

58 Supply & earthing with GI earth pipe 4.5 mtrs. long 40 mm dia including accessories and providing masonery enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / koke and salt as required 4.00 Nos. ₹ 0.00

59 Providing and Fixing of 25X5mm GI strip on surface/Rcutss conection as required. 150.00 Mtrs. ₹ 0.00

Sub Total Annexure-B ₹ 0.00

Annexure-C (FIRE FIGHTING AND FIRE HYDRANT SYSTEM)

1 Supply and erection of Fire hydrant piping carried out of GI Class "C" pipes as per IS: 1239 with all online Pipe Fittings, flanges (ASA 150 class), fasteners, nuts, bolts (Galvanized), gaskets, tees, necessary bends, reducers, washers, 'U' clamp and tapping for gauges/instruments including cutting, welding, fixing in / on walls, ceiling by using suitable supports etc.

2 Supplying, Installing, testing and commissioning of C.I. butterfly valves conforming to BS 5155 (PN 1.6) slim seal standard lever operated type with required flanges, gasket, fasteners, nuts, bolts etc. complete.

3 Supplying, Installing, testing and commissioning of Single headed oblique type ground faced hydrant valve conforming to IS 5290, made of gunmetal with 63mm dia instantaneous outlet of 80mm dia flanged inlet, Blank caps, chain and CI hand wheels etc with required flanges, gasket, fasteners, nuts, bolts etc. complete. 30.00 Nos. ₹ 0.00

4 15 M long, 63mm dia RRL hose conforming to IS 636 Type A with instantaneous couplings (SS) and Hoses shall be stored inside the hose cabinet. 24.00 Nos. ₹ 0.00

5 Gunmetal short branch pipe with nozzle conforming to IS 903. 12.00 Nos. ₹ 0.00

6 M.S. Hose cabinet (with canopy) stand mounted type fabricated out of M.S. sheet of 16 swg. With glass fronted (4mm thick glass with rubber beeding) door, lock and key suitable for 1 branch pipe and 2 hoses and size of the cabinet shall be 600mm x 750 mm x 250mm. Quoted rate shall be includes suitable stand for mounting, all fasteners etc, and cabinet shall be powder coated of approved colour both inside and outside with structural work. 12.00 Nos. ₹ 0.00

7 MS support:- Supply, fabrication, erection, alignment and fixing in position, true to line and level, structural work for structural supports etc. made out of MS supports for above ground pipes made of L angles / MS plates, U clamp etc including splicing, cutting, bending, drilling, welding, riveting, bolting etc. 1500.00 Kg ₹ 0.00

8 Supply, installation, transportation of Fire Extinguishers including supply of nuts, bolts, brackets etc. including making good of wall, wherever required, after installation and supply of all related material all complete as per codes, standards, specifications, documents and direction of Engineer-in-Charge.

a CO2 type Fire Extinguisher 4.5 KG as per IS 15683 10.00 Nos ₹ 0.00

b Mechanical Foam-9 Liter as per IS 15683 10.00 Nos ₹ 0.00

c DCP type Fire Extinguisher-25 Kg as per IS 10658, Trolley type 5.00 Nos ₹ 0.00

d ABC type Fire Extinguisher – 6 KG as per IS 15683 10.00 Nos ₹ 0.00

9 GI Fire Water buckets filled with sand including the structure of fixing-3 buckets on GI fabricated stand. The stand shall be painted with red oxide or zinc chromate primer and Synthetic enamel paint thereafter. 10.00 Set ₹ 0.00

10 Self – Illuminated Signages-Fire Exit, Fire Extinguishers, Danger, Fire Bucket and No Smoking, Size 300 x 150mm approx. 20.00 Nos ₹ 0.00

11 Coating and Wrapping materials of underground GI Pipes as per the site requirement. 300.00 Sqm ₹ 0.00

12 Excavation, Leveling and back filling. Soft soil as per the site requirement. 100.00 Cum ₹ 0.00

13 Excavation, leveling and back filling. Hard Rock / Road Cutting as per the site requirement. 50.00 Cum ₹ 0.00

14 Painting of the above ground pipes / valves and structural support with one coat of metal primer and two coat of red enamel paint as per the scope of work. 400.00 Sqm ₹ 0.00

15 Making of RCC civil foundation for laying of pipes over the earth as per the site requirement. 90.00 Cum ₹ 0.00

16 Supply, Installation, Testing & commission of Miscroprocessor based conventional type 08 zone Fire Alarm Panel preffered Make: Ravel/ Bosch/ Royal/ Siemens/ASES. 1.00 Nos ₹ 0.00

17 Supply, Installation, Testing & commission of conventional type Beam detector, shall have laser point for beam detector alignment, shall cover the range of 100 Meter range, shall detect the smoke thru Infrared LEDs, shall have transmitter and receiver in one assembly and the reflector place on the opposite side. Make: Agni/ Apollo/System sensor/Bosch. 10.00 Nos. ₹ 0.00

18 Supply, Installation, Testing & commission of Conventional type Smoke detector with Junction Box preferred Make: Apollo/System sensor/ Bosch/Royal. 30.00 Nos. ₹ 0.00

19 Supply, Installation, Testing & commission of Response indicator. 15.00 Nos. ₹ 0.00

20 Supply, Installation, Testing & commission of Conventional type Hooter. 12.00 Nos. ₹ 0.00

21 Supply, Installation, Testing & commission of Conventional type Manual Call Point. 12.00 Nos. ₹ 0.00

22 Supply, Installation, Testing & commission of Battery 12 Volts, 7 AH preferred Make: Excide/ Amaron/ Sonic/ Tata Green/ Microtech. 2.00 Nos. ₹ 0.00

23 Supply, Installation, Testing & commission of Auto dialer minimum 05 Telephone Numbers connectivity. 2.00 Nos. ₹ 0.00

24 Supply, Installation, Testing & commission of 2 x 1.5 sq.mm Armored Cable. 1200.00 Mtrs. ₹ 0.00

25 Supply, Installation, Testing & commission UPS 500-700VA, Input Volt: 220VAC ± 5%, 50Hz, Output Volt:220VAC ± 5%, 50Hz, Back Up Time: 15 – 20 Min, (Minimum). Make: V-Guard/Luminus/APC 1.00 Nos. ₹ 0.00

Total Annexure-C ₹ 0.00

Annexure-D (CCTV SURVEILLANCE SYSTEM)

1 IP CAMERA INDOOR DOME TYPE 5MP WITH AI FEATURES AND SD CARD 256GB Camera Type-IP Camera Motorised Varifocal indoor dome type Image Sensor 1/2.8" CMOS or better Varifocal Lens: 3X optical zoom or better Total pixels-5 MP IR Range- 30 m or better Wide Dynamic Range 110 dB or better Support-ONVIF Profiles S,G,T Onvif profile-M is desirable, however the analytics features of the proposed camera should be enabled in existing VMS (Insight, Vodeolytics) or Vivotek NVR Other features required-Defog, Audio IN/OUT, Video Compression H.265; H.264; M-JPEG, Privacy Masking Environment/Impact rating: minimum IP65 and IK10 or better To be supplied with 256GB compatible SD memory card ( camera OEM preferred ), mounting clamps,cable concealment, box (GI coted weatjher proof)etc. Data security Cyber Security compliance : STQC Certification BIS 13252 Power: Shall support power input through IEEE 802.3 af/at POE ,12V DC /24V AC (Desirable) as secondary power source. Vendor shall meet or exceed above sepecifications. 6.00 Each ₹ 0.00

2 IP CAMERA VARIFOCAL OUTDOOR BULLET TYPE 5MP WITH AI FEATURES AND SD CARD 256GB Camera Type-IP Camera Motorised Varifocal out door bullet type Image Sensor 1/2.8" CMOS or better Varifocal Lens: 3X optical zoom or better Total pixels-5 MP IR Range- 30 m or better Wide Dynamic Range 110 dB or better Support-ONVIF Profiles S,G,T Onvif profile-M is desirable, however the analytics features of the proposed camera should be enabled in existing VMS (Insight, Vodeolytics) or Vivotek NVR Other features required-Defog, Audio IN/OUT, Video Compression H.265; H.264; M-JPEG, Privacy Masking Environment/Impact rating: minimum IP65 and IK10 or better To be supplied with 256GB compatible SD memory card ( camera OEM preferred ), mounting clamps,cable concealment, box (GI coted weatjher proof)etc. Data security Cyber Security compliance : STQC Certification BIS 13252 Power: Shall support power input through IEEE 802.3 af/at POE ,12V DC /24V AC (Desirable) as secondary power source. Vendor shall meet or exceed above sepecifications. 4.00 Each ₹ 0.00

3 ACCESS LAYER SWITCH 8-Port PoE+ 2 SFP Port (1G) Layer-2 fully loaded Managed Industrial Grade Switch or better with External surge protector and PoE line protector+with rack mounting brackets Industrial grade Managable 8 Port Gigabit Ethernet POE+ Switch with 2 SFP Ports (Speed1G)with rack mounting brackets + External SPD + poE line protector vendor shall provide Single mode SFP Module compatible with the proposed switch and shall be Integrated. Preferably the same make of switch. 8 X 10/100/1000mbps Base-T Ethernet ports with PoE+ (802.3 af/at) 2 X 1Gbps SFP ports for uplink/downlink connectivity PoE Power Budget-Minimum 120W , standards supported: IEEE 802.3af(PoE) and IEEE 802.3at(PoE+). Switching capacity: Non-blocking fabric ; Minimum 20Gbps switching capacity(full duplex) Support-Port mirroring,VLAN, IP-MAC-Port Binding (IMPB), Broadcast/ Multicast Storm Control Certifications-FCC/CE/UL/BIS/EN External Surge protector Device (SPD) for switch Single phase AC SPD (Type-2) complying IEC/Ul Standard Builtin/External surge protection for all ethernet ports in the switch External Ethernet Surge protector spec Connector Type-Shielded RJ45,compliance- IEC 61643-21 Lines in/out port-RJ45 compatible with 10/100/1000Base-T Lines to be protected-8 (all 4 pair of CAT6 are to be protected by Gas Discharge Tube(GDT)) Vendor shall meet or exceed above sepecifications. 2.00 Each ₹ 0.00

4 1KV online UPS with 30min backup Online UPS capacity 1KV minimum back up 30minute Battery:Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Battery backup-30 min full load + Battery rack , features-LED display, Audible alarm Vendor shall meet or exceed above sepecifications. 2.00 Each ₹ 0.00

5 9U network Rack (indoor) with PDU with wall/Pole mounting kit Lockable enclosure, Front Door : Lockable GI Door, weather proof IP 55, with heat management,4 port PDU, 2pair heavy duty vertical rail mountings, with MCB and with respective wall/Pole mounting kit, MCB-1, with Pole / wall mounting accessories Vendor shall meet or exceed above sepecifications. 2.00 Each ₹ 0.00

6 OFC (12 Core Single Mode), Armoured OFC should have a fiber reinforced plastic (FRP) central strength member, Water blocked interstices, taped, polyethylene inner sheathed, Corrugated steel tape armoured, polyethylene UV sheathed stabilised, max. crushing resistance: 2000N, Max bending radius full load: 10 D, 12 Core Single Mode armored Fiber Optic Cable. 500.00 Rmt ₹ 0.00

7 24-Port LIU 24-Port rack/wall mountable fully loaded LIU should be provided for terminating the optic fiber cables. It shall have minimum bending radius and the splice trays shall function as a splice cover for pigtail splicing. In compliance with latest industry standard. Cable glands shall be provided for secured anchoring of incoming cables. Rubber grommets shall be provided at the cable entry point for tight sealing. It shall be fitted with SC couplers & Pigtails(fully loaded) and all accessories for termination. Along with SC-LC fiber patch cord (12Pair) to be supplied. 2.00 Each ₹ 0.00

8 Outdoor CAT6 UTP Cable. Standard 23 AWG, 4 Twisted Pairs, Polyethylene insulation A HDPE compound insulates the cores with a IEC 60332-1 complied LS0H inner jacket and UV resistant heavy duty FR PVC outer sheath. Compliant to TIA/EIA-568-C.2 Category 6 cable specifications Vendor shall meet or exceed above sepecifications. 800.00 Rmt ₹ 0.00

9 HDPE Duct (40mm) Double walled corrugated HDPE duct of diameter 40 mm made as per specifications IS 4984. All accessories required during the laying of the duct like joints, bends, adapters shall be in vendors scope and as per standard. 500.00 Rmt ₹ 0.00

10 Route Marker: Route marker to be laid at an interval of 50 m along the entire length of cable trench. Material-RCC,length-18 inch, CCTV Logo 10.00 Each ₹ 0.00

11 Soft Soil Digging: Type of Digging-Trench, Depth - 3 feet, Wide - 1 Feet, 500.00 Rmt ₹ 0.00

12 SUPPLY, INSTALLATION, TESTING ,COMMISSIONING AND PROVE OUT ENTIRE SYSTEM 1.00 Set ₹ 0.00

Total Annexure-D ₹ 0.00

Annexure-E (IT WORKS)

1 LAN / WAN / Internet Connection (including network Switches/Rack/Cabling/UTP cable/ PVC Pipe /Installation) 12 Nos ₹ 0.00

2 Multi Function Machine (printer/scanner/Photocopier) A4 size with 3 years warranty and installation 8 Nos ₹ 0.00

Total Annexure-E ₹ 0.00

Sub Total (Annexure-A+B+C+D+E) ₹ 0.00

ADD GST @ 18% (( IGST18%) or (CGST @ 9% +SGST@ 9%)), Whichever is applicable ₹ 0.00

GRAND TOTAL (ANNEXURE-A+B+C+D+E) ₹ 0.00

GOODS AND SERVICE TAX (GST)

A Registration, HSN / SAC Code & GST Rate

1 Bidder should indicate GSTIN No. (Copy of GST registration to be enclosed) and PAN No. (copy of PAN to be enclosed).

2 Tender will be considered/ accepted, if & only if the vendor has a valid GST Registration No

3 Central Tax/ State Tax/ Integrated Tax/ Union Territory tax to be quoted as per GST Law

4 Bidders to ensure correct applicability of Central Tax/ State Tax/ Integrated Tax/ Union Territory tax based on the Inter / Intra state movement Supply of goods and provision services or both

5 Bidder shall mention the SAC Code/HSN Code for goods and services in accordance with GST law in their Bid and subsequently in their tax invoice. HAL, Koraput Division shall not be responsible for any error in SAC Code/HSN Code for goods and/or services specified by supplier/contractor

B Invoicing & Payment

6 The Tax Invoice for supply of Goods & Services should be raised as per the provision of GST Act & Rules and must compulsorily mention the following

a. HAL, Korpaut Division GST registration number as 21AAACH3641R1ZJ

b. Name & address of supplier / Vendor/ Contractors

c. GSTIN of Supplier / vendors / Contractors

d. Consecutive Serial Number & date of issue

e. Description of goods or services

f. Total value of supply

g. Taxable value of supply

h. Tax Rate – Central Tax & State Tax or Integrated Tax, Cess

i. Amount of Tax charged

j. Place of supply

k. Address of delivery if different from place of supply

l. Signature of authorized signatory

7 Reimbursement of GST to the vendor is contingent upon complying with the following condition by the service provider

i. Uploading the (invoices raised on HAL, KoraputDivision ) onward GST Return (GSTR-1) in GSTN Network portal within the statutory time period

ii. Discharging the GST tax liability to the Government.

iii. Submission of Tax Invoice to HAL, Korpaut Division.

iv. Submission of proof of payment of GST to HAL, Korpaut Division.

v. Receipt of goods / services by HAL Koraput Division.

vi. Availment of Input Tax Credit by HAL, Korpaut Division .

C Input Tax Credit

8 In case GST credit is delayed/ denied to HAL, Korpaut Division, due to non/delayed receipt of goods and/or services and/or tax invoice or expiry of timeline prescribed in GST Law for availing such ITC, or any other reason not attributable to HAL, Korpaut Division, GST amount shall be recoverable from Vendor along with interest & penalty levied/ leviable on HAL, Korpaut Division, as the case may be

9 In case vendor delays declaring such invoice in his return and GST credit availed by HAL, Korpaut Division is denied or reversed subsequently as per GST law, GST amount paid by HAL, Korpaut Division towards such ITC reversal as per GST law shall be recoverable from vendor/contractor along with interest & penalty levied/ leviable on HAL, Korpaut Division.

10 In case of discrepancy in the data uploaded by supplier in the GSTN portal or in case of any incomplete work/service, then HAL, Korpaut Division will not be able to avail the tax credit and will notify the supplier of the same. Supplier has to rectify the data discrepancy in the GSTN portal or issue credit note (details to be uploaded in GSTN portal).

11 For any such delay in availing of tax credit for reasons attributable to vendor (as mentioned above), interest as per the GST Act & Rules, along with penalty, if any will be deducted for the delayed period i.e. from the month of receipt till the month tax credit is availed, from the running bills.

D Penalty for Non-compliance of GST Act

12 Penalty amount so determined along with GST if applicable thereon shall be recovered from the contractor.

E Anti-profiteering Measure .

13 Any reduction in rate of Tax on any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensurate reduction in prices. Bidders have to submit declaration in their bid that they have complied with ‘Anti-profiteering clause’ under GST law.

The bidder’s quoted rates/ price should be after considering the Input Credit under GST law at their end, since GST on output (GST amount charged in Invoice) will be paid by HAL.

F Other Provision

14 In case any changes in taxes and duties as per Gov. Notification (including GST), the same shall be applicable from time to time.

G Allottment of quarters

15 Quarters will be allotted to the awarded agency subject to availability & recommendation from the E-I-C/ O-I-C for which rents as applicable will be recovered from the running bills of the agency.

HINDUSTAN AERONAUTICS LIMITED KORAPUT DIVISION CENTRAL CONTRACT CELL

Name of the Work CONSTRUCTION OF CENTRAL STORE INSIDE SUKHOI ENGINE DIVISION

Line No KPTCC/W/554

Name of the Contractor

Check list and acceptance for submission of documents with tender

Sl No. Documents Checking by Contractor

1 Constitution and Legal Status of Bidder Firm Registration, Power of attorney of signatory of Bid

2 Submission of EMD Amount by way of DD/BC drawn in favour of HAL, Engine Division, Koraput, payable at SBI, Sunabeda (Scanned image of the same in jpg format only to be uploaded) Value

3 Submission of Banker’s Solvency certificate for an amount as mentioned in tender issued by any nationalized bank issued within a period of 12 months from the final date of submission of tender Value

4 Submission of Work order copies for having executed similar works in Govt./ Railways/PSUs/Reputed firms

5 Submission of Performance / Completion certificates from Govt./Railways/PSUs/Reputed Private Firms (supported with TDS certificate if from Reputed Private firms) in the last 7 years. For one works value

For Two works value

For Three works value

6 Submission of Contractor’s Registration Certificate with Govt./Quasi Govt./PSUs /Reputed Company

7 Submission of Income Tax Return for last 3 financial years. 2022-23

8 Submission of Average Annual financial turnover during the last 5 years 2020-21

9 Balance sheet for the last 5 years

10 Plant and Machinery details of work

11 Proposed work completion Schedule in the form of Bar Chart

12 Work in Hand in the required format

13 Bank Balance Statement for the last three months

14 Overdraft facilities available with the agencies

15 Submission of Copy of PF Registration PF No.

16 Submission of Copy of Labour License

17 Submission of Copy of PAN Card PAN No.

18 Acceptance of “General Condition of Contract and Instruction to tenderers” and “Notice Inviting Tender” along

19 NEFT/RTGS Format Duly filled in (Original to be submitted in the office)

20 GST REGISTRATION NO: GST No.

21 Submission of Copy of ESI Registration ESI No.

LIST OF WORK IN PROGRESS FOR THE WORK CONSTRUCTION OF CENTRAL STORE INSIDE SUKHOI ENGINE DIVISION

Line No. KPTCC/W/554

NAME OF THE CONTRACTOR

Sl. No. Name of Work Total/W.O Value in Rs. Executed/Completed Value Rs. Balance Rs. Date of Commencement Date of Completion