Making Office cabins in front of auditorium gallary at first floor of Admin building

Amount

Making Office Cabins in front of Auditorium gallary at first floor of admin building.

Providing and fixing anodized aluminium partition with 12mm th. particle board of approved shade 5mm th. Glass . fixing in horizontal and vertical aluminium pipe section of size 63.5mm x 38.1mm about 0.681 kg/m & 63.5mm x 38.1 about 0.686 kg/m including glazing ( 0.11 kg/m) transparant rubber bidding for glass, screws, nails, door lock, handle, labour as per drawing and directed by Engineer incharge etc complete.

Providing and fixing floor spring 70kg by cutting floor and redoing it for above door panels of Golden / Rinox / Bose make etc. complete. As directed by Engineer in charge .

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 millimeter perimeter channel and intermediate channels at maximum center to center distance 1200 millimeter galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 millimeter item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour , material, lifts etc. all complete.

Providing, making & fixing Office table of length 3.5' , width 2' and height 2.5' with 18 mm thick ply for all section including sliding keyboard platform section & support to Keyboard platform , 12 mm thick ply for back side , 1 mm thick wooden colour S.F laminate on external sides & sides of Keyboard platform ,including internal surfaces two coat of putty and two coat of synthetic enamle paint with rubbing and polishing the surface. Fevical, termisal spray, screws, nails, all required biddings with polish, labour charges etc. complete. As per drawing and directed by Engineer in charge.

Removing white wash or colour wash by steel wire brushing and / or scrapping by sand paper and preparing the wall surface smooth including necessary repairs to scratches etc. complete. As directed by Engineer incharge

Providing and applying priming coat on concrete/ masonary / Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying putty to old plastered surfaces in two coats to receive approved paint in all positions including all materials , labour scaffolding and curing etc. complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete.

Hari Om Construction