PROVN OF ROOM AT MH INCLUDING CERTAIN SPECIAL REPAIR, REVENUE AND MINOR WORKS

Amount

Excavating over areas, not exc 1.5m deep and getting out in soft/loose soil including dressing/trimming sides and levelling/grading and ramming of bottoms of excavation complete all as specified and directed

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep for foundation and getting out in hard/dense soil,including dressing/trimming sides and levelling/grading and ramming of bottoms of excavation complete all as specified and directed

Removing excavated materials (soil) to a distance not exc. 150m and deposting where directed at a level not exc. 1.5m above the starting point complete all as specified and directed

M&L for moorum/red bajri filling in floors or pavings, laid in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

Returning filling in incl spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed

M&L for PCC 1:4:8, type D2 (using 40mm graded aggregate)as in foundation filling and mass concrete complete all as specified and directed

M&L for RCC (Design Mix) M-25 (using 20mm graded stone aggregates) in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc basement slabs, under reamed plies and mass concrete complete all as specified and directed

M&L for RCC (Design Mix) M-25 (using 20mm graded stone aggregates) in Columns, pillars, piers, posts and struts and the like, complete all as specified and directed.

M&L for RCC (Design Mix) M-25 (using 20mm graded stone aggregates) in Beams, cantilevers, bressummers, lintels over 1.5m span and the like, complete all as specified and directed.

M&L for RCC (Design Mix) M-25 (using 20mm graded stone aggregates) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like and the like, complete all as specified and directed.

M&L for form work to sides of concrete foundation , footings .base of columns, sides and soffits of plinth beams and similar works as in rough finshed flat surface complete all as specified and directed

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular rough finished complete all as specified and directed

M&L for form work for rough finished surface to soffits of suspended slabs such as floor,roof slabs and landing not exceedind 200mm thick complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, lintels, shelves and similar works as in rough finshed flat surface complete all as specified and directed

M&L for form work to edges of concrete flats fair finished, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 10 cm wide complete all as specified and directed.

M&L for MS TMT bars 10mm dia and over, cut to length, bend to shape required, including cranking, bending, sprially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for MS TMT bars 5mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed

M&L for brick work with subclass‘B’ bricks, straight or curved on plan exc 6mmean radius built in CM 1:6 using old size bricks complete all as specified and directed

M&L for rendering 15 mm thick on fair faces of brick work built in CM (1:4) finished the surface fair and even complete all as specified and directed

M&L for 15mm thick rendering on cement mortar 1:6 on other than fair faces of brick work finished even & smooth without using extra cement complete all as specified and directed

Supply only integral waterproofing compound complete all as specified and directed

M&L for rendering 10 mm thick cement plaster in CM 1:3 on concrete surfaces as in ceiling finish even and smooth complete all as specified and directed

M&L for prepration of new wall surfaces & applying birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion distemper over a coat of wall primer incl. preparation of surfaces of walls complete all as specified and directed

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new wall surfaces and applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed . Make Asian ACE or equivalent make as approved by GE

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces complete all as specified and directed

M&L for hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick plain cement concrete type C-1, 1:3:6, (using 40mm graded stone aggregate) as in plinth protection, sub basse etc finishing the top surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregates) in sub base floorings complete all as specified and directed

M&L for 25 mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregates) as in floorings, as in sub base of floor tiles in ground floor.complete all as specified and directed

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade laid over and including sceed bed in CM 1:4 complete all as specified and directed

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm and n. exc. 0.18 sqm as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match with colour of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 450mm x 350mm x 6 to7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade laid over and including rendering in CM 1:3 as backing complete all as specified and directed .

M&L for cement concrete1:2:4 type B-1, (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed

S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube complete all as specified and directed

S&F factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face,incl 03 Nos of 100mm size stainless steel butt hinges for each shutter complete all as specified and directed

M&L for interlocking S.S Sheet Std. Steel Grade 304 door with lead line of 2mm thick fixed with hinges approx width of 1.50m and height 2.10m provided with lead glass opennig with steel framing including complete fitting fixture for installation at site complete all as specified.

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed .

S&F 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

S&F steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel complete all as specified and directed

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed

S&F 100mm size stainless steel butt hinges, medium weight, cold rolled complete with stainless steel screw complete all as specified and directed

S&F 150mm long aluminium anodized, barrel tower bolts extruded section. (Make : Crown or equivalent) complete all as specified and directed

S&F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised. handle fabricated type (Make :- Crown or equivalent) complete all as specified and directed

S&F vitreous China urinal, Half stall type, white complete including cp waste coupling and providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.(excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed

S&F vitreous China wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia incl waste pipe complete all as specified and directed

S&F vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe) including plastic seat cover white and mild steel chromium plated aluminum hinging devices, connected to drains outlet, fixed in repairs complete all as specified and directed

S&F 10 litres PVC, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets and 32mm dia pvc flush pipe complete all as specified and directed

S&F 15 mm dia bib taps, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F 15mm bore angle stop valves, fancy type chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unionS&Fixed complete all as specified and directed

S&F 15 mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed

S&F PVC connection of 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

S&F 20mm bore galvanised steel tubes medium grade with all fittings for water supply pipes fixed to walls complete all as specified and directed.

S&F 15mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls complete all as specified and directed. .

S&F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and forming benching as required, Internal dia of pipe 150mm ccomplete all as specified and directed.

S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints fixed to walls complete all as specified and directed. .

S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints f laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal with access door 110mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .

S&F PVC (SWR) bends any radius with access door, 75mm dia complete all as specified and directed.

M&L for cement concrete bed to 100mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in 1:3:6, type C1 (using 20mm graded stone aggregates) complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe complete all as specified and directed.

M&L for concealed point wiring with 1.5 Sqmm PVC-FRLS insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of external diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed:-

For one light, fan point controlled by one switch

For one call bell point controlled by one push button switch.

For one 5 Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.72 here in before but for power point wiring using with 2.5 sqmm PVC-FR LS insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated, sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead

S&F Modular switch, one way, 6 Amp 230, 1 module complete all as specified and as directed.

S&F socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed.

S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and as directed.

S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed

S&F ceiling rose, surface backlit,three terminal complete all as specified and as directed.

S & F in repair/replacement bell ding dong 230 V, single phase complete all as specified and as directed.

S&F modular bell push 6A ,1 module complete all as specified and as directed.

S&F call bell AC type 230 Volt open recessed type of suitable covered with hylem sheet complete all as specified and as directed.

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting with 9 watt LED bulb complete all as specified and as directed.

S&F modular fan step regulator 120W, 2 module complete all as specified and as directed.

S&F testing and commissioning of MCB SP 240 volt 6 Amp to 32 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and as directed.

All as per Srl item No.84 above but TPN 50 - 63 Amps, 240 V

S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used TPN, 4 way, 415V with 200 Amps rated bus bar of suitable size complete all as specified and as directed.

S&F LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make - BAJAJ cat part no BIBWP10WLED /CG cat part no LBHE-10-CDL.

S&F TL fitting 20 /18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed. Make:- Bajaj cat part No BCLSB 20 WH/ CG Cat part No LCTC-18-CDL

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtr below ground level connected to galvanized iron wire 4mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber) 1:2:4 type B-1 using 20mm graded stone aggregate copy shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4 funnel with wire gauge of 22 gauge (0.68mm) 8 mesh per liner inch, 50 mm thick cover of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with 8 mm four MS bars @ 80mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (1991) and specified including provision of earth wire protected by 15mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, all excavation and earth work & connectiing the earthing to an earthing test point as specified and testing on complete all as specified & directed by Engr-in-Charge.

S&F ceiling fan 1200 mm sweep and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

S&F exhaust fan AC single phase 230/ 240 V of size 300 mm sweep mettalic body with all accessories including making hole in stone /brick wall grouting & making good in all aspects complete all as specified and directed. Bajaj MAXX AIR/Crompton EXHD300-6-1.

Supply, laying and testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armored heavy duty 1100 Volts grade with stranded aluminium conductor 25 Sqmm, 4 core complete all as specified and directed

S&F galvanised pipe medium grade incl fittings 20mm dia complete all as specified and as directed.

S&F galvanised pipe medium grade incl fittings 15mm dia complete all as specified and as directed.

S&F gun metal gloge or gate valves of size 15 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Cutting existing GI tubing for alterations ,screwing existing tube of any size for new connection including earth work and clamp, neccessory fitting complete as per site required complete all as specified and as directed.

Supply, installtion and testing of Altoch Dosing System (Model ADS - I) or equivelent comprising Non-metallic solution tank of capacity 100 ltrs with motor driven agitator to maintain uniform suspension throughout the tank with PE/FRP Lid & Level Gauge along with Single Phase Electric motor and Agitator with shaft & blade in Plastic - mounted on Tank. Lid must have port hole for pouring Calcum Hypochlorite and water when necessary. Lid must have provision for mounting dosing pump on the lid/wall alongwith Decrin Dosing Pump, (Model 96NGQ51 or equivelent) comprising motor driven reciprocating pump chemical feeder for injecting Calcium Hypochlorite employing motor-driven reciprocating chemical pump having output of 2 U.S. GPD to 40 U.S GPD and adjustable high pressure of up to 100 PSI all complete. Make - Declibac Tech or equivalent make as approved by GE

Supply of Altoch - GP High strength Calcium based granular disinfection chemical. Make - Declibac Tech or equivelant approved by E-in-Cs Branch, New Delhi.

M&L for concealed sub main wiring with 4 single core PVC insulated, sheathed copper conductor stranded 1100 volt grade cable of size 16 sqmm drawn in and incl PVC casing caping of suitable size not less than 25 mm size ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, sheathed copper conductor stranded 1100 volt grade cable of size 16 sqmm cable as continuous earth lead including connecting in existing meter complete all as specified and colour coding of cables such as Phase-Red, Yellow & Blue Neutral-Black and Earth-Green

S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used 4 way DB, 240 V. complete all as specified and directed

S&F online UPS GXT MT + 10 KVA (3x3) with battery backup for minimum two hours complete all as specified and as directed. Make:-Exide/Microtek/Luminious

M&L for battery for online UPS Quanta 12V, 100AH SMF battery complete all as specified and as directed. Make:-Exide/Microtek/Luminious/Amaron

M&L for battery stand to accommodate 20 Nos battery 12V 100AH suitable for 10 KVA online UPS complete all as specified and as directed

M&L for concealed sub main wiring with 2 single core PVC insulated, sheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm drawn in and incl PVC casing caping of suitable size not less than 25 mm size ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, sheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm cable as continuous earth lead including connecting in existing meter complete all as specified and colour coding of cables such as Phase-Red, Yellow & Blue Neutral-Black and Earth-Green

S&F online UPS 5KVA, 48V single phase with battery backup for minimum two hours complete all as specified and as directed. Make:-Exide/Microtek/Luminious

M&L for battery stand to accommodate 04 Nos battery 12V 100AH suitable for 5 KVA online UPS complete all as specified and as directed

Supply, laying, connecting and testing cable XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volt grade cross sectional area 35 Sqmm 3.5 core complete all as specified and directed

All as per Srl item No.107 above but 10 sqmm 2 core complete all as specified and directed

Supply, install, connecting and commissioning of CPRI approved main factory fabricated LT distribution panel board, outdoor type, both side openable including loking arrangement with sliding door bolt , cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15 mm thick MS sheet with anticorrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4Nos insulated bus bar each made of high conductivity aluminium suitable for 400 Amps, prewired with suitable size of copper cable/insulated copper strip including PCC work and Iron work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following including taking down old LT panel:-

(A) INCOMING (i) MCCB, 4 Pole, 415V, 50HZ 100 Amps with rupturing capacity 16 KA-fixed magnetic and fixed thermal - 01 No.

(B) OUTGOING (i) MCB SPN 32 Amps 10KA - 02 Nos (ii) MCB SPN 20 Amps 10KA - 02 Nos (iii) Spare MCB SPN 20 Amps 10KA - 02 Nos

Excavation in trenches in soft/ loose soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying of cables/poles or foundation etc and getting out complete all as specified and directed

M&L for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed

M&L for bricks sub class'B' laid dry in trenches over the cable adjoining each other widthwise for cable protection complete all as specified and as directed

S&F in repair pipe galvanised iron light grade 40 mm dia (ISI marked) with all fittings laid in trenches or on pole, crossing of road,fixed on wall for protection of cables complete all as specified and directed

M&L for boring of holes under road/railway crossing, pavement, hardstanding by means of mechanical earth auger complete all as specified and as directed.

M&L for concealed sub main wiring with 4 single core PVC insulated, sheathed copper conductor stranded 1100 volt grade cable of size 16 sqmm drawn in and incl PVC casing caping of suitable size not less than 25 mm size ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, sheathed copper conductor stranded 1100 volt grade cable of size 16 sqmm cable as continuous earth lead including connecting in existing meter complete all as specified and colour coding of cables such as Phase-Red, Yellow & Blue Neutral-Black and Earth-Green complete all as specified and directed

M&L for mild steel iron stand made out of equal angle of size 25mmx25mmx4mm, flat iron of size 20mmx4mm including any fabrication of structural steel sections made in three stairs of suitable size to accommodate UPS batteries 10 Nos in each row including welding, bending cold or hot, in any shape or size as indicated or directed including rubber mat as an insulating medium on each row and inclusive of one primer coat with red oxide primer, one under coat and one finishing coat of synthetic enamel paint complete all as pecified and directed.

Supplying, connecting and testing of batteries 12V, 26AH for online UPS with suitable wire and lugs including replacement of old exisitng batteries of any capacity complete all as specified and directed. Make:-Exide/Microtek/ Luminious/Amaron

M&L for checking and making functional in all respect of 5KVA online UPS including cleaning inside and outside complete all as specified and directed

M&L for replacement of IGBT, SMPS, control card and driver card complete suitable for 5KVA online UPS as per existing complete all as specified and directed.

M/s ajeet enterprises

pal enterprises