ADDN ALTN TO OFFICERS LIVING IN ACCN SNCO MESS AND NCS E LIVING IN BILLETS AND PROVN OF INSULATION SYSTEM PHASE-I AT FBSU AF

Amount

Sch 'A' Part-I (Septic Tank of 100 users and Soakage Well 3.5m dia and 4 depth for 100 users) Note: Prepriced of septic tank and soakage well has been by MES at par with SSR 2020 Part II the details are at ser page No 36 of schedule contactor has to quote his rate for both items based on drawing and details.

Sch 'A' Part-II (Building including services) Note:- This schedule is not pre priced by MES and the pre priced rate indicated as "Rs.0.00" under Col 5 signifies this fact only.

Excavation in trenches n exc 1.50m wide and n.exc 1.50m deep, for foundation etc n exe 10 sqm on plan and n exe 1.50m depth and getting out in soft/loose soil.

Excavation in post holes or similar holes each not exc 0.50 Cum and getting out and removing the soil to a distance not exc 50 mtrs and making good surface.

Excavation over areas, not exceeding 1.5m deep and getting out in soft/loose of soil complete.

Excavation over areas, exceeding 1.5m deep but not exceeding 3.00m deep and getting out in soft/loose of soil complete.

Excavation over areas, exceeding 3.00m deep but not exceeding 4.50m deep and getting out in soft/loose of soil complete.

Matrial and Labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation/ filling/ mass concrete all as specified.

Matrial and Labour for PCC 1:2:4 type B-2 as in post hole, foundation fillings and mass concrete

Returning, filling in (soil) including spreading, leveling, watering and well ramming in layers n exc 25 cm each all as specified.

Removal of excavated material to distance exc 250 mtr but n.exc 500mtr and deposited where directed at a level not exc 1.5 mtr above the starting point.

Demolition of brick work /stone masonry built in cement mortar including all quions , arches pillasrd etc complete all as specified

Matrial and Labour for brick work with sub class ‘B’ bricks straight or curved on plain exc 6m mean radius built in CM (1:6) all as specifed and directed by Engr-in-Charge.

Supply and Fixing mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge

Supply and Fixing Mild steel TMT bars 5mm and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified.

Demolition of cement concrete (Un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Dismantling of board/ceiling/panelling any discription fixed in any position with nails or screuus all as specified as directed

Taking down chowkhats of frames exceeding 1.5 Sqm and n.exc 4 Sqm(without taking off shutters from the frames) and making good disturbed portion complete all as spd.

-Ditto-as per item above but having are not exc 1.5 sqm each -ditto-

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Taking up or down steel tubing 15mm bore and connections, all as specified and directed by Engineer-in-Charge

-Ditto-as per item above but of 20mm bore

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Matrial and Labour cutting chases, pinning for concealed water tubing and making good to facing where required and pointing in cement mortar 1:3, cutting exc 10cm but n.exc 20cm girth in brick wall all as specified and as directed by Engineer-in -Charge.

Matrial and Labour for GI tubing 15mm dia medium grade fixed to walls or ceiling , laid in floors complete all as specified and directed

-Ditto- as per item above but of 20mm dia

Matrial and Labour for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength tapping screws as specified

Matrial and Labour for plain, galvanised, mild steel sheeting,0.63mm in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

Matrial and Labour for coloured non skid ceramic tiles 7 to 8mm thick (Square/ rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge.

Matrial and Labour for coloured/printed glazed ceramic tiles of size 350mm x 250mm x 7 mm / 450mm x 350mm x 7 mm thick laid in verticle on wall (skirting / Dado) etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing coloured/printed Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors, Skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match light shade over 15mm thick screed in CM(1:6) complete all as specified and directed by Engineer-in-Charge.

Matrial and Labour for 25mm thick PCC Type B-0 1:2:4 using 12.5mm graded crushed stone aggregate finished fair for sub base of flooring all as specified.

Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar

Matrial and Labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed in cement screed 20mm thick in cement moartar1;6 overwith grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing complete

Matrial and Labour for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15 mm thick cement screed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Matrial and Labour for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 Grade with grey cement and no pigment over and including 50 mm thick PCC 1:2;4 type B1 using 20mm graded stone aggregate complete all as specified

Matrial and Labour for 2nd class Hard wood Plain solid straight chowkhats of wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including tarring back of surface in contact with walls all as specified & directed

Matrial and Labour for 2nd class soft wood 35mm thick glazed & skeleton shutters for windows/ventilators , open rebated & prepared to receive glass/gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc size of member of shutters as spd in SSR part-1 sec 8 clause 8.24(a) supplied and fitted to chowkats all as specified.

Supply and Fixing 35mm thick 2nd class hard wood factory made plain framed, panelled shutter without interlock rail with one panel and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces, kiln seasoned and chemically pressure treated.

Supply and Fixing PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per Engr - in - charge.

Supply and Fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suplying & fixing in the frame at site as per directed by Engr - in- charge.

Supply and Fixing Aluminium handle, cast type, anodiesed of size 125 mm & fix to shutter complied all as specified.

Supply and Fixing Aluminium anodised, barrel tower bolt of extruded section and fix of length 125mm

Supply and Fixing mild steel butt hinges minimum weight 100mm size. Mild steel cold rolled.

-ditto-as per item above but of 75mm -ditto-

Supply and Fixing roof trusses (framed), trussed,posts, struts, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats,base plate and gusset plates etc confirming to Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Matrial and Labour for rendering 15mm thick 1:4 of cement plaster on fair faces of brick work or concrete surfaces is without using any extra cement complete all as specified

Matrial and Labour for rendering 10mm thick on unfair faces of brick or concrete surfaces in cement mortar 1:6 finsihed even and smooth without using any extra cement complete allas specified

Matrial and Labour for framed work as in false ceiling, doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-410-W(Gde-E-250) quality-A complete all as specified and directed.

Supply and Fixing prelaminated particle board 12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in false ceiling fixed to Mild steel/ timber frame complete all as specified

Supply and Fixing 5.5mm thick sheet figured glass, pin headed and glazing with oil putty or fixed with bead/glazing pins in squares size not exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size quality or description) all as specified and directed.

Supply and Fixing 5.5mm thick sheet figured glass, pin headed and glazing with oil putty or fixed with bead/glazing pins in squares size exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size quality or description) all as specified and directed.

Supply and Fixing 5mm thick looking mirror of size 600mm x 450mm of sainted glass mounted on 6mm thick ply wood with aluminum edging alround all as directed by Engr-in-Charge.

Supply and Fixing in repair 15m bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

Supply and Fixing in repair 15m bore stop valves, cast copper alloy, angular fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for union all as specified and directed.

Supply and Fixing in repair 15mm bore CP pillar tap fancy type, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts for iron pipes.

Supply and Fixing in repairs 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position complete, all as specified & directed by Engineer-in-charge.

Supply and Fixing in repair 20mm Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe .

Supply and Fixing CP Grating doom 100mm dia all as specified and directed.

Supply and Fixing PVC (SWR)/ sewage pipes single socketed,75mm bore, in any length with rubber ring joints including bends,elbows and other connecting fiitings as required ,fixed to wall and floor complete all as specified

Description all as per srl item above here-in-before but 110 mm bore

Supply and Fixing of PVC (SWR) vent cowl, 75mm bore complete all as specified

Supply and Fixing in repair 20mm bore stop valve (ISI Marked) heavy duty cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions and fixed all as specified.

Supply and Fixing vitreous china bowl urinal flat back size of 465 x 355 x 265mm white with grating and union for discharge pipe incl waste coupling,shower spray for urinal and pipe (32 mm dia) all as directed & specified by Engr-in-Charge.

Supply and Fixing 3mm thick sheet figured glass, pin headed and glazing with oil putty or fixed with bead/glazing pins in squares size exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size quality or description) all as specified and directed.

Supply and Fixing galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks of galvanised wire staple fixed with wooden beads of 1st class softwood to wooden doors/windows all as specified.

Supply and Fixing of 300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete (door spring).

Supply and Fixing door closer hydraulically regulated of cast iron body,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Supply and Fixing Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor with overall length of 140mm

Supply and Fixing Mild steel sliding door bolts of 250mm length,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

Supply and Fixing of 125 mm cast iron or malleable cast iron handles, cast type, stove enamelled black

Supply and Fixing of 150 mm cast iron or malleable cast iron handles, cast type, stove enamelled black

Supply and Fixing Mild steel barrel tower bolts of 150mm length, stove enamelled black, with bright bolt and fixed

Supply and Fixing Mild steel barrel tower bolts of 100mm length, stove enamelled black, with bright bolt and fixed

Supply and Fixing of 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished

Supply and Fixing of 125 mm of hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

Supply and Fixing of 150 mm of hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

Supply and Fixing of 30mm continuous (piano) hinges,mild steel, bright finish or electrogalvanised

Matrial and Labour for preparation of new wooden surfaces of any description, exceeding 10 cm width or girth and providing two coat of synthetic enamel paint over one coat of pink primer all as specified & directed.

Matrial and Labour for 2nd Class hard wood Weather boarding,clean sawn, plain,20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps

Supply and Fixing for mild steel work in purlin, rafters, running rails, struts and similar works fixed with angle cleats or other connecting plates including cutting and welding etc conforming to Fe-410-W(Gde-E-250) quality-A as directed by Engr-in-Charge.

Supply and Fixing galvanised corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roof, 0.63mm thick, grade-O quality, with 120 grms/sqm zinc coating and grade 'B' Class 8 complete all as specified and directed by Engineer-in-Charge.

Matrial and Labour for preparation of newly or previosly untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint on iron work or CGI/PGI sheets in camoufage pattern in three colour over a coat of red oxide or zinc chromate complete all as specified and as directed.

Dismantling timber scantling 40 sq cm and over in section in any position in framed work

Matrial and Labour of Wrought timber frame of second class soft-wood in scantlings

Matrial and Labour of 9mm thick prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work to wall as in wall paneling, kitchen cabinet etc all as specified and directed by Engineer-in-Charge

Matrial and Labour for PCC 1:3:6 type C-1 using 20mm thick graded crushed aggregate, 50mm thick, as in plinth protection laid in alternate bays,finshed even and smooth without using extra cement having 6mm wide joints throughout the thickness of plinth protection, in concrete bays and in between walling and plinth protection the joints of ways of concrete shall be filled with mastic filling comprising of one part of heated bitumen 85/25 or 90/100 grade and three parts of sand (all by weight) complete all as specified.

Matrial and Labour for 18-20mm thick granite stone (slab) of any colour/type, (table rubbed and polished) work as in floors/ vertical surfaces, cooking platforms and like, set in neat cement including pointing in white cement with admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed in cement mortor (1:4) laid and jointed with gray cement slurry mixed with pigment, complete all specified and directed.

Matrial and Labour for reinforced cement cncrete1:2:4 type B1 as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Supply and Fixing for framed work such as grills, gratings etc with end of bars shouldered or riveted or forged into spikes, framed guard bars confirming to Fe-290, Gde-E-165.

Matrial and Labour for preparation of old painted surfaces of steel or iron work or CGI/PGI sheeting in walls or roofing over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour) complete all as specified and directed. (Make: Berger/Johnson/Nerolac/Asian/Shalimar).

Supply and Fixing PVC (SWR)/ sewage pipes single socketed,75mm bore, in any length with rubber ring joints laid in trenches or in floor complete all as specified

Supply and Fixing vitreous china wash down water closet pan (pedestal pattern) coloured with trap (excluding flushing cistern and flush pipe) and making connection to drain and to flushing pipe etc., including plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated jet device and PVC connection of suitable length including removing old WC of any description , complete all as specified and directed by Engineer-in-Charge

Supply and Fixing vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580mm x 440mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing, fixed in repair, all as specified and directed.

Supply and Fixing PVC seat cover with CP jet for EWC white colour complete with MS hinge chromium plated, fixed in repairs, complete all as specified and directed.

Matrial and Labour for concrete bed to drain pipes using cement concrete 1:3:6 type C-2 including packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed.

Supply and Fixing 150 mm soil glazed stoneware drain pipe laid in trenched and joined as specified and directed.

Supply and Fixing vitreous china wash hand basin coloured, oval type of size 550mm x 400mm including waste chain & plug, porcelain stopper, 32mm dia PVC waste pipe with CP brass coupling and set of brackets complete all as specified and directed by Engineer-in-Charge

Supply and Fixing 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, PVC connection 450mm long including fixing and 32mm dia flush pipe, fixed in repair, complete all as specified and directed.

Supply and fixing repair CP Grating doom 125mm dia as suitable to existing trap as per requirement all as spd and directed by Engg-in-Charge

Supply and Fixing in repair bib tap, 15mm dia. Chromium plated with crutch or butterfly handle screwed for iron pipe or for brass ferrule and fixed all as specifid & directed by Engineer-in-charge.

Supply and fixing in repair Brass CP central hole wash basin mixer for hot & cold for 15mm dia complete fixed to connection as specified and directed by engineer-in-charge

Supply and Fixing in repair stop valve,fancy type,chromium plated screwed down,high pressure, with crutch or butterfly handle of 15mm dia. Screwed both ends for iron pipe or for unions and fixed.

All as per item above but in repair long shank and cup (concealed type) stop tap 15mm bore cromium plated CP

Supply and fixing in repair 15mm dia 600mm long PVC connection with brass nut and washer complete Make- PRAYAG

Supply and fixing in repair Shower Rose brass chromium plated 125mm size with arm suitable for 15mm dia pipe all as specified

Supply and Fixing PVC cabinet type looking mirror of size 425 mm x 300 mm as approved sample(Make: Prayag)

Supply and fixing in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleatsincluding all necessary item complete all as specified

Supply and fixing in repair towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed by enginee-in-charge

Supply and fixing in repair ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed.

Supply and Fixing in repairs wall mixture 15mm bore chromium plated cast copper alloy with capstan head screwed for iron pipe fixed all as specified

Supply and Fixing Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-410-W(Gde-E-250) quality-A complete all as specified and directed.

Matrial and Labour for lagging to pipes 20mm bore used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842

Supply and Fixing in reapir for Curtain rails,anodised ,aluminium alloy chromium plated with fixing brackets, stops, rollers etc.

Matrial and Labour for 3 mm thick wall care putty over plastered surface to prepare the surface even and smooth all as specified and directed.

Matrial and Labour for preparation of new platsered surfaces and applying two coat of oil bound distemper all as specified and as directed.

Matrial and Labour for preparation of new plastered or unplastered surface of walls and applying two coats of Acrylic exterior emulsion paint in camofaging (distruptive) pattern in three colours (green,greyand brown) over a coat of acrylic primer complete allas specified and directed

Matrial and Labour for preparation of old painted ceiling surfaces or other wood/wooden surfces of any description not otherwise described over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint over a coat of pink primer all as specified.

Matrial and Labour for preparation of old plastered surface of walls and applying one coat of Acrylic exterior emulsion paint in camoflaging (distruptive) pattern in three colours (green,greyand brown) over a coat of acrylic primer complete allas specified and directed

Matrial and Labour for preparation of old platsered surfaces and applying two coat of oil bound distemper all as specified and as directed.

Matrial and Labour for reinforced cement cncrete1:2:4 type B1 as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Matrial and Labour for reinforced ce,ment concrete nominal mix type B1 using 20mm agrded stone aggregate Foundations, including rafts,footings, foundation beams;plinth beams; bases forcolumns, etc.; basement slabs,under-reamed piles and mass concrete

Matrial and Labour for reinforced cement concrete nominal mix typeB1 using 20mm graded stone aggregate Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like

-Ditto- as per item above but as in Beams, cantilevers, bressummers,lintels over 1.5m span

-Ditto- as per item above but in Columns, pillars, piers, posts and struts

Matrial and Labour for formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface of concrete surface

Matrial and Labour for formwork to sides and soffits of floor or roof beams, beam aunchings,girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors andbeams, etc

Matrial and Labour for formwork to sides of concretefoundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) offoundation and plinth beams;and similar work; vertical or to batter surfaces

Matrial and Labour for formwork to sides of pillars,posts, struts, piers, columns and stanchions

Matrial and Labour for formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concretewalls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontalor sloping and similarwork exc 10cm but n exc 20cmwide

Matrial and Labour for preparation of old plastered surfaces of walls and applying two coats of white wash on walls complete allas specified

Matrial and Labour for preparation of old plastered surfaces of ceiling and applying two coats of white wash on complete allas specified

Matrial and Labour for GI wire netting 0.90mm dia and12mm mesh lathing to wood or metalstudding, joists, etc. in walls, ceilings,stanchions, beams, etc. including alllaps, cutting and wastesquare wire mesh

Supply and Fixing brass Drawer pulls, 4 screw plate with fixed dishedpull; 80 mm to 100mm long

Supply and Fixing brass drawer handels flush drop (65 to 75mm grip) on 4 screwplate, including lettingin

Supply and Fixing floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor having overall length of cover plate 150mm

Supply and Fixing continuous (piano) hinges,mild steel, bright finish or electro galvanised having width of flap when open 40mm

Matrial and Labour for chequered cement concrete tiles20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neet gray cement slurry in floors including 75 mm PCC 1:3:6 using 20 mm aggregate in sub base.

Taking down carefully aluminium/copper point wiring (light, bell, fan, socket) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, holder, fittings and pressed steel terminal box sheets complete, stacking material at site and making good the disturbed surface of walls/ floors to match with existing surface complete all as specified.

Matrial and Labour for point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated, unsheathed, FRLS type, 1100 volts grade,1.5 sqmm copper conductor cable as earth continuity cable including pressed steel terminal boxes made out of MS sheet with 3 mm thick laminated sheet cover for mounting of switches, socket, fan regulators complete all as specified for the following:-

(a) One light /fan/bell point controlled by one nos, one way 5/6 Amps switch.

(b) One light point controlled by two no two way switch.

(c) One 3/5 pin socket outlet, 5/6 Amp on the same board controlled by one nos, one way switch.

(d) One 3/5 pin socket outlet, 5/6 Amp, independent controlled by one nos, one way switch.

All as per srl item No 2.00 here-in-before but using cable of size 2.5 sqmm (for phase & neutral) and 2.5 sqmm as continuous earth cable for 15/16 Amps socket outlet/flood light/roof mounted light, independent controlled by one nos, one way switch complete all as specified.

Supply and Fixing in replacement of piano type switch one way, SP, flush type, 5/6 Amps, 230 volts AC, 50 Hz complete all as specified.

Supply and Fixing in replacement of piano type switch two way, SP, flush type, 5/6 Amps, 230 volts AC, 50 Hz complete all as specified.

Supply and Fixing in replacement of piano type bell push switch one way, SP, flush type, 5/6Amps, 230 volts AC, 50 Hz complete all as specified.

Supply and Fixing in replacement of piano type socket outlet flush type, 5 pin, 5/6 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified.

Supply and Fixing in replacement of piano type switch socket combination flush type, 5 pin, 5/6 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified.

Supply and Fixing in replacement of piano type switch socket combination flush type, 6 pin, 5/15 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified.

Supply and Fixing of electronic type ceiling fan regulator 230 Volts single phase flush type complete all as specified.

Supply and Fixing in replacement of ceiling rose 3 terminals, PVC/polycarbonate/bakelite, isolated body 230 volts AC, 50 Hz complete all as specified.

Supply and Fixing in replacement of electric call bell ding dong type suitable for 230 volts, single phase AC supply all as specified.

Supply and Fixing in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FR type, 1100 volts grade 2 x 4 sqmm complete drawn in and includindg casing caping ISI marked of suitable size and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified.

Supply and Fixing in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FR type, 1100 volts grade 2 x 6 sqmm complete drawn in and includindg casing caping ISI marked of suitable size and its accessories along with 1x 6 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified.

Supply and Fixing in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating material like polyester epoxy quoted surface mounting 4 way TPN 415 volts, vertical type, surface mounting with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete with & including one No. MCCB 100 Amps 3 pole 25 kA fixed type for incoming complete all as specified.

Supply and Fixing in replacement of sheet metal enclosure DB TPN 4 way, double door, 415 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB TP/TPN as incomer & MCB SP as outgoing complete all as specified.

Supply and Fixing in replacement of sheet metal enclosure DB SPN 4 way, double door, 230 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB DP/SPN as incomer & MCB SP as outgoing complete all as specified.

Supply and Fixing in replacement of sheet metal enclosure DB SPN 8 way, double door, 230 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB DP/SPN as incomer & MCB SP as outgoing complete all as specified.

Supply and Fixing in replacement of MCBs, SP, 10-32 Amps, 230 volts,10 kA rupturing capacity, C curve type complete all as specified.

Supply and Fixing in replacement of MCBs, SPN, 32 Amps, 230 volts, 10 kA rupturing capacity, C curve type complete all as specified.

Supply and Fixing in replacement of MCBs, TPN, 40-63 Amps, 415 volts, 10 kA rupturing capacity, C curve type complete all as specified.

Supply and Fixing in replacement of LED tube light fitting,1x18 watt,220V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

Supply and Fixing in replacement of LED light fitting mirror type with high output diffuser 2 feet,1x5 watt,220V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

Supply and Fixing in replacement of city 1 LED wall light fittings 9 watt, 230 volts AC, indoor type made up of polycarbonate complete with lamp holder, LED lamp 9 watts, 6K, LED driver, connector block pre-wired with all accessories all as specified.

Supply and Fixing in replacement of LED bulk head light fittings 1x8 watt, 230 volts AC made up of pressure die cast housing, IP 65 protection, 6000K including making of electrical connection with & including two core flexible copper conductor cable of suitable size with all accessories all as specified

Supply and Fixing energy efficient high speed exhaust fan 200mm sweep single phase 230 volts 50 Hz AC, 900 RPM supply totally enclosed motor with die cast alumn rotor mounted on two ball bearings complete with louvers & shutters including cutting chases for fixing Exhaust fan to wall/window making good the disturbed surfaces to match with the existing specification, connecting electrically using 3 core 0.75 sqmm PVC insulated flexible copper conductor cable over all sheathed all as required at site or directed by Engr-in Charge.

Supply and Fixing ceiling fan 1200mm sweep 230 Volts by means of fastner or making hole for fixing fan in existing roof complete all as specified and directed.

Supply and Fixing single pole and neutral enclosure surface mounted 240 volts with 2 pin and earth plug and socket with one single pole MCB 20 Amps

Matrial and Labour for water heater (Geyser) storage type, electric supplied and installed complete capacity 25 Ltrs including all accessories nut,bolts etc all as specified and directed.

Matrial and Labour for GI tubing medium grade 15mm bore fixed on floor/ wall complete all as specified including all fitings all as directed by Engr-in-charge

. --do-- but 20mm dia

Matrial and Labour for cutting including screwing existing steel tubing for altrations or additions incl Tee/Nipple upto 25-32mm dia pipe

Matrial and Labour for bib tap chromium plated with long shank and cup, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe

Matrial and Labour for stop volve fancy type chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe

Supply and Fixing of CP Connection of size 45 cm long and necessary accessories required for fixing

Matrial and Labour for lagging of exposed pipe by providing all around of pipe 40 mm thick bounded mineral wool performed SNAPON pipe section of density 144 Kg/m3 conforming to IS -9842, covered completely by chicken mesh net 25 gauge 20mm mesh and reinforced with 1mm galvanised wire applied spirally @ 15 cm centre to centre and providing 5mm thick smooth evenly. Plaster layers of composition consisiting of 85% magnesia asbestos and plaster of paris mortar 1:6 of required strength to suit exposed weather condition under sub zero temperature for 15 mm dia pipe.

All as per Srl item no. 36 above but for size 20mm dia.

Supply and laying cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 core.

Matrial and Labour for sand cushioning to under ground cable provided with a layer of sand 8 cm depth before laying of cable and 15 cm depth after laying and stretching the cable all as specified. Note: Punned thickness of sand shall be measured & paid.

Matrial and Labour for well burnt sub class 'B' bricks of nominal size 230X115X75 mm abutting each other for mechanical protection of cable with width equal to lenght of brick complete all as specified.

Matrial and Labour for earthing complete with galvanised steel earth plate electrode 600X600X6mm thick burried directly in ground (Earth pit not less than 2.25 mtr deep below the ground level with top edge of earth plate not less than 1.5 mtr below normal ground level) connected to galvanised earth strip lead wire 4mm dia by means of bolts, nuts, chuck nuts and washers of GI or steel all as shown in electrical plate No 5 including charcoal dust common salt, 20mm bore GI medium grade watering pipe funnel with wire mesh, including 40mm dia GI pipe light grade for protection of GI strep including PCC pit 1:2:4 type B-1 using 20mm graded stone aggregate with angle iron 40X40X5mm frame 60mm thick RCC cover with 8mm steel bars 100 mm centre to centre both ways i.e. horizontal and vertical complete all as directed by Engr in charge and testing for required value complete. Note: If earth resistance of earthing is not found satisfactory fresh earthing will be done by the contractor to achieve proper resistence result on his risk and cost.

Supply and Fixing tubing 'light grade' galvanised iron with all fittings and fixed to poles, walls etc. with flat iron clamps/bolts/nuts/washers or laid in floors/under roads complete all as specified and directed of the 80mm bore

M/S BASHIR AHMAD AND SONS

M/S RATHER CONSTRUCTION CO