Upgradation and Maintenance of road from T06-Bulbul Nowgam Shihlipora Dialgam Stage-U (Batch-I, 2019-20) Package No. JK01-2001, Length 9.00Kms PMGSY Division Anantnag

Amount

PART A Site Clearance

Clearing & grubbing road land including uprooting wild vegetation , grass, bushes ,shrubs, saplings & trees of girth up to 300mm , removal of stumps of such trees cut earlier & disposal of unserviceable materials up to a lead of 1000M including removal & disposal of top organic soil not exceeding 150mm in thickness as per technical specifications clause 201 (in area of non thorny jungle).

Uprooting and removal of Stumps and roots

300 - 600 mm Girth

600-900mm girth

900-1800mm girth

PART B EARTH WORK

Excavation in Soil in hilly areas by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5m and a lead upto 20m as per technical specification clause 1603.1

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5

Construction of embankment with approved materials from borrow pits with a lift 1.5m transporting to site graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.1 including cost and cariage of all materials from approved source to site of work, with all leads , lifts, loading , unloading and octori.( finished work to be measured) complete job

Construction of unlined surface drain of average cross sectional area 0.4 sqm in soil to specified lines, grades,levels and dimensions Excavated material to be used in embankment with a lift upto 3m and lead of 50m (average lead 25 m) .as per technical specificaions clause 307. Mechanical means.

PART C PIPE CULVERTS (1000MM 4NO, 750MM 10 NO, 600MM 10 NO

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Type B (First Class) Bedding:- Laying (First Class) bedding on well compacted sand, moorum or approved granular material / quarry material as per Clause 1105 (ii) including cost and cariage of all materials from approved source to site of work, with all leads , lifts, loading , unloading and octori.( finished work to be measured) complete job

Type A (First Class Bedding ) :- Laying concrete cradle bedding with M15 Grade Cement Concrete as per Clause 1105 including cost and cariage of all materials from approved source to site of work, with all leads , lifts, loading , unloading and octori.( finished work to be measured) complete job

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. including cost and cariage of all materials from approved source to site of work, with all leads , lifts, loading , unloading and octori.( finished work to be measured) complete job

1000MM DIA

750MM DIA

600MM DIA

Providing concrete for Plain / reinforced concrete in open foundation including dewatering complete as per drawings and technical specification clause 802,803, 1202 and 1203.Including loading, unloading,haulages, royality,octorie form work etc complete. P.C.C grade M-10 including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 PCC M-15 Grade H/D Walls including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Backfilling behind abutment,wing wall and return wall complete as per drawings & technical specification Clause 401.4 and TSC 408 (Granular material / Quarry incld. loading ,unloading, haulage Octori, royality Complete job Available at site.

PART D CD (1X2M 6 NO, 1X3M 3NO,1X5M 2NO 2X10M 2NO )

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.Ordinary rock(not requiring blasting)

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203. PCC Grade M-10 including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203. PCC Grade M-15 including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Plain/reinforced concrete in substructure complete as per drawings and technical specifications Clause 802, 804,805,806,807, 1202 & 1204. PCC Grade M-15 including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Providing and laying reinforced cement concrete in super structure as per drawings and technical specification clause 800, 1205.4 and 1205.5. R.C.C Grade M-25 including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Supplying , fitting and placing TMT bar reinforcement (Fe 415) in substructure complete as per drawing and technical specification clauses 1002, 1005 and 1202 including cost and cariage of all materials from approved source to site of work, with all leads , lifts, loading , unloading and octori.( finished work to be measured) complete job

Supplying , fitting and placing TMT bar reinforcement (Fe 415) in superstructure complete as per drawing and technical specification clauses 1002, 1010 and 1202 including cost and cariage of all materials from approved source to site of work, with all leads , lifts, loading , unloading and octori.( finished work to be measured) complete job

Providing fitting and fixing in position pipe railing consisting of IS Rolled steel joist posts designation IS MB 100 (100x75) at 2.5m interval and three rows of 50mm dia steel pipes (light) including fixing in position on bridge deck complete as per drawing and technical specifications clause 1208.2.

Providing weep holes in plain/reinforced cement concrete abutment, wing wall & return wall with 100mm dia PVC pipe extending through the full width of the structures with slope of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204. 3.7

Backfilling behind abutment,wing wall and return wall complete as per drawings & technical specification Clause 401.4 and TSC 408 (Granular material )Quarry incld. loading ,unloading, haulage Octori, royality Complete job

Dismantelling/ diversion of nallah & dewatering of trenches

PART E PROTECTION WORK B/R WALL/PCC EDGE WALL

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Providing concrete for Plain / reinforced concrete in open foundation including dewatering complete as per drawings and technical specification clause 802,803, 1202 and 1203.Including loading, unloading,haulages, royality,octorie form work etc complete. P.C.C grade M-10 including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Stone masonry work in cement mortar in Substructure complete as per drawing and technical specifications clauses 702,704, 1202 & 1204. Random Rubble Masonry, In cement mortar (1:5) mix including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Random Rubble Masonry work Laid Dry complete as per drawing and technical specificatins Clauses 702, 707, 1202 & 1203. In Sub Structure including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Backfilling behind abutment,wing wall and return wall complete as per drawings & technical specification Clause 401.4 and TSC 408 (Granular material / quarry material incld. loading ,unloading, haulage Octori, royality Complete jobb

Providing PCC M20 Architectural Coping on the top of Retaining wall/Breast wall. complete as per drawing and technical specification Clause 615,710 &1204.3.11. incld. loading ,unloading, haulage Octori, royality Complete job

Plain / reinforced concrete in sub structure as per drawings and technical specification clause ,804,805,806,807, 1202 and 1204. Including loading, unloading,haulages, royality,octorie form work etc complete.P.C.C grade M-15. ( Parapets ) including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

PART F PROTECTION WORK (PCC EDGE WALL)

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203. PCC Grade M-10 including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203. PCC Grade M-15 including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Providing weep holes in plain/reinforced cement concrete abutment, wing wall & return wall with 100mm dia pvc pipe extending through the full width of the structures with slope of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204. 3.7

Backfilling behind abutment,wing wall and return wall complete as per drawings & technical specification Clause 401.4 and TSC 408 (Granular material /Quarry material available at site.) incld. loading ,unloading, haulage Octori, royality Complete job

PART G PCC DRAIN

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Providing concrete for Plain / reinforced concrete in open foundation including dewatering complete as per drawings and technical specification clause 802,803, 1202 and 1203.Including loading, unloading,haulages, royality,octorie form work etc complete. P.C.C grade M-10 including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 PCC M-15 Grade including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Providing concrete for plain/reinforced concrete in Sub Structure complete as per drawings and technical specifications Clause 802, 804, 805,806,807,1202,1204 RCC M-25 Grade (Approach Slabs).including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Supplying, fitting and placing TMT bar reinforcement in Sub Structure complete as per drawings and technical specifications Clauses 1002,1005,1010 and 1202 including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

PART H PAVEMENT

Excavation for roadway in soil/ordinary rock by mechanical means including cutting, stacking & loading in trippers , trimming bottom & side slopes, in accordance with requirements of lines, grades & cross sections including disposal of excavated material with all leads & lifts as per technical specifications clause 302.3

Scarifying existing bituminous surface to a depth of 150mm by mechanical means & disposal of scarified material with a lift upto 3 m & lead upto 1000 m as per technical specifications clause 301.5

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local granular material / Quarry material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408.including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

WMM: Providing, laying, spreading and compacting graded stone aggregates to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (pug miller), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100 KN weight to achieve the desired density including lighting, barricading & maintenance of diversion, etc as per tables 400.11 & 400.12 & technical specification clause 406 including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Prime Coat: Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502. (Low Porosity) including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Tack Coat: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Bituminous Macadam : Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504.including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

20mm thick OGPC: Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.(By Mechanical Means) Bitumen S-90 including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Seal Coat: Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 (By Manual Means) including cost of form work & incl. cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured)

Hard Shoulder: Development of shoulders Using Nallah/Quarry material/Khak Bajri including spreading in uniform thickness ,rolling with smooth wheel roller 80-100 KN in stages to proper grade,watering amd compacting to the required density . including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, )

PART I ROAD FURNITURE

Providing and fixing retro- refllectorised cautionary , mandatory and informatory sign as per IRC :67 made of encapsulated lense type reflective sheeting wide clause 1701, 2.3 fixed over aluminum sheeting 1.5mm thick supported on a mild steel angle iron post 75 x75 x6mm steel tube firmly fixed to the ground by properly designed foundation with M-15 grade cement concrete 450 x450 x 600mm , 600mm below round level as per drawing and technical clause 801. .

Reinforced cement concrete M15 grade boundary pillar/local stone of standard design as per IRC:25 fixing in position including finishing and lettering , painting , concreting, ercting,loading, unloading, haulage etc. as per drawings and technical specifications cluase 1704

Providing & fixing PMGSY Information sign board with logo as per drawings & technical specifications as per drawing clause 1701 and annexure 1700.1.

Providing & fixing PMGSY CITIZEN INFORMATIRYboard as per drawings & technical specifications as per drawing clause 1701 and annexure 1700.1.

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 Ordinary Kilometer Stone (Precast)

Construction of Reference Pillars as per Fig. 1600.1( d) as per drawing and Technical Specification Clause 1602.10

Construction of job piller/bench mark as per Fig. 1600.1( d) as per drawing and Technical Specification Clause 1602.4

Painting lines,dashes,arrows,etc.on roads in two coats on new work with ready mixed Road marking paint conforming to IS:164 on bituminous/concrete surface,including cleaning the surface of all dirt,dust and other foreign matter,demarcation at site and traffic control as per drawing and technical specifications Clause 1702.

Maintenance for Five Years

1st Year

2nd Year

3rd Year

4th Year

5th Year

The Contractor has to quote the rates for Construction part without GST and GST @12% shall be added at the time of Allotment.

M/s RK Construction