Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.3 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹37.2 L+₹11,819.81 (0.32%)Rejected-AOC H NO 1 7 1 79 1 ROAD NO 7 REDDY ENCLAVE TEMPLE ALWAL SECUNDERABAD 500 010 | HYDERABAD | TELANGANA | 500010 | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹42.9 L+₹5.9 L (15.9%)Rejected-AOC | L3 | Rejected-AOC Being not L1 | |
| 4 | L4₹46.5 L+₹9.4 L (25.5%)Rejected-AOC NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L4 | Rejected-AOC Being not L1 | |
| 5 | L5₹47.6 L+₹10.6 L (28.6%)Rejected-AOC | L5 | Rejected-AOC Being not L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
28 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri M Saravanan, IDSE, GE
Garrison Engineer North 35 Allenby Lines Secunderabad 500087
REPAIRS TO JOINERY BUILT IN CUPBOARDS ROLLING SHUTTERS AND ROOF IN CERTAIN BUILDINGS IN ZONE A B AREA UNDER AGE B R N NO I OF GE N SECUNDERABAD
2023_MES_606270_1
8690
Open Tender
Civil Works
Item Rate
300 days
GARRISON ENGINEER NORTH SECUNDERABAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER (NORTH) SECUNDERABAD
₹90,000
Yes
16 Nov 2023
28 Jun 2023
31 Jul 2023
28 Jun 2023
28 Jul 2023
14 Jul 2023
Amount
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 Sqm each complete all as specified and as directed
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 Sqm and not exc 4.00 Sqm each complete all as specified and as directed
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and as directed
Supply and fix Solid PVC door frame of size 50 x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, all as specified and shown in Section 8 of MES Schedule Part-II 2020 complete all as specified and as directed
Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawings given in Section 8 of MES Schedule Part-II 2020 as applicable complete all as specified and as directed.
S&F 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of primer complete all as specified and as directed.
S & F pressed steel frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of primer complete all as specified and as directed.
S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chambered, put together with glue pinned at joints complete all as specified and directed.
S&F bands, steps, supports or stays for rain water, hooks (stay) heavy for large gates, hook and pintle hinges clamps, hold fasts wall ties, hooks for hanging james and similar small articles Fe-410-0 or Fe-310-0 complete all as specified and directed.
M&L for preparation of wood surface, treating the back of chowkhat, end of post etc area and treated with tar or coal tar black paint and tarred exceeding 0.1 Sqm but not exc 0.5 sqm each etc complete all as specified and as directed.
All as per item No. 10 above but treating small articles such as hold fasts, ends of posts, backs of chowkats etc area n.exc.10Sqm each etc complete all as specified and as directed
Cutting holes in brick wall built in cement mortar for inserting hold fast and making good the disturbed portion in cement mortar 1:3 depth of embedded portion exc half brick & not exc one brick etc complete all as specified and as directed
Material and labour for plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping, bed plates, filling back hollow portion of chowkats complete all as specified and as directed
S & F 30mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides etc complete all as specified and as directed.
S & F 35 mm thick factory made second class hardwood, plain framed panelled shutters (any number of panel) with panels of timber flat on both sides(feather edged) or of veneered particle board medium density wood particle board with commercial veneering on both faces complete all as specified and as directed
S & F 30 mm 1st class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc complete all as specified and as directed
Supply and fix in repairs 200 mm long mild steel helical door ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
Supply and fix butt hinges of 100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and as directed.
S & F Butt hinges MS 100 mm cold rolled complete all as specified and as directed.
Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section with bright bolt complete all as specified and as directed.
Supply and fix extruded aluminium alloy handles, fabricated type, anodised of 150 mm size complete all as specified and as directed.
S & F mild steel sliding bolt 300 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed.
Supply and fix in repairs 140 mm long double legged door stopper of aluminium anodized with rubber shoe, nut (2 each on one stopper) with spring complete all as directed complete all as specified and as directed.
Supply and fix in repairs 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed with necessary brass screws etc, complete all as specified and as directed.
Supply and fix in repairs 300 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed with necessary brass screws etc, complete all as specified and as directed.
Supply and fix in repairs 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed with necessary brass screws etc, complete all as specified and as directed.
Supply and fix in repairs 125 mm long Brass Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type C-11 and fixed with necessary brass screws etc, complete all as specified and as directed.
Supply and fix in repairs 125 mm long Brass Extruded brass handles, fabricated type polished and fixed with necessary brass screws etc complete all as specified and as directed.
Supply and fix in repairs 2nd class hard wood plain small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n exc 200 Cum each complete all as specified and as directed
M & L for applying two coats of synthetic enamel paint over a coat of prink primer on wood or wood based material over 10 cm width or girth including preparation of new wood surface etc complete all as specified and as directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden surface concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and as directed
S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed
S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square but exceeding 0.5 Sqm in each pane complete all as specified and as directed
S & F figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed
S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed
M&L for IInd class hard wood plain fillets of sectional area exc 6 Sqcm & n exc 13 Sqcm area square, rectangular or triangular in section, clean sawn, secured with nails or brads with bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and as directed
M&L for IInd class hard wood plain fillets of sectional area exc13 Sqcm and n exc 25 Sqcm area square, rectangular or triangular in section, clean sawn, secured with nails or brads with bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and as directed
S&F in repairs MDF board, 18/19 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.
S&F in repairs MDF board, 12 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws, brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging complete all as specified and directed.
S&F in repairs 18mm thick Plywood grade BWR type BB, fixed with screws to frame work fixed with screws to timber frame work complete all as specified and directed.
S&F in repairs 12 mm thick Plywood grade BWR type BB, fixed with screws to frame work , fixed with svrews to timber frame work complete all as specified and directed.
M&L for 1mm thick colour/white Decorative laminate sheet Type I of texture surface finish , colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and directed.
Supply and fix stainless steel bottle pullout of size 106 mm X 476 mm X 130 mm complete all as specified and directed.
S&F 200mm long stainless steel decorative handle fixed with screws complete all as specified and directed.
S&F 200mm long stainless steel hinge for cabinets auto close concealed type complete all as specified and directed.
S&F stainless steel telescopic type ball bearing drawer channel of any size complete all as specified and directed.
S&F stainless steel kitchen basket of size 17"x20"x4" of size complete all as specified and directed.
All as per item No.47 above but of size 17x"x20"x6" complete all as specified and directed.
All as per item No.47 above but of size 17x"x20"x8 complete all as specified and directed.
Supply and fix Stainless steel dust bin holder 10" dia complete all as specified and directed.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised 40mm width of flap fixed with screws as in repairs complete all as specified and directed.
Supply and fix butt hinges of 50mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type E-22 complete all as specified and as directed.
Supply and fix in repairs 100 mm size hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
Supply and fix in repairs 0.56 mm thick plain anodised Aluminium sheeting alloy 31000 H4 in covering to door shutters etc fixed with aluminium alloy screws complete all as specified and as directed.
Supply and fix steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and average width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters including 10mm powder coated square safety grills, locking arrangement and all necessary accessories etc, complete all as specified and directed. Make: NCL/ELEXIRMET/M/s ASHWANI & SONS
S & F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vatted profiles are to be reinforced with 19 x 19mm MS square tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc complete all as specified and as directed. Make :SINTEX or equivalent in RAJSHRI, NANDI as approved by GE.
Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.
M&L for machine cut granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like laid over & including 10mm thick bedding /backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed.
Rounding and moulding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.
Taking down steel/aluminium windows/ventilator /Doors complete with frames and shutters (without taking off the shutters) of area n exc 2.00 Sqm complete all as specified and as directed.
S&F standard aluminum sections of any Type as in doors, windows, ventilators, partitions etc, powder coated, cut to size, jointed with cadmium plated steel screws, including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), Nylon ball bearings and Unit rate quoted shall be deemed to include for sealing the gap of frame with Jamb and Cill (all-round) using silicon gel at the rate of 0.05 lit/m for both faces of window etc complete all as specified and as directed. Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However, glass panes / Bakelite sheet only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate.
Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for not exc 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and directed.
Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for exc 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and directed.
Supply only for 12mm thick Veneered decorative plywood, grade I (with BWR resin) decorative both side faces etc complete all as specified and as directed.
S & F in repairs anodized aluminium alloy (fancy type) powder coated curtain rod 19 mm dia of standard thickness with fixing brackets, stops, rollers etc complete all as specified and as directed.
Supply and fix stainless steel curtain rod of 25 mm bore fancy type complete all as specified and as directed
Supply and fix in repairs for stainless steel curtain rod brackets (decorative type) suitable for curtain rod of 25 mm dia, complete all as specified and as directed
Dismantling of wrought iron or MS works of any description such as, chajja etc, including necessary straightening of bends complete all as specified and directed.
Material and labour for mild steel framed work as in doors and chowkats or gates, ladder etc of angle or other section with gusset plates, rails, braces, MS sheet etc, complete, drilled for fixing of steel sheeting are other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging fittings and conforming to Fe 410-W (Gde E-250) quality ‘A’ complete all as specified and as directed
Supply and fix mild steel sheeting of 1.25 mm thick plain, black sheet as in wall cladding, covering to door shutter and similar works cut to size, holes punched, including round headed screws fixed to steel framing with plan 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete all as specified and as directed
Routine maintenance of rolling shutter of area not exc 10.00 Sqm each and the maintenance including the following all as specified and directed. (A)Taking down hood covers for carrying out routine maintenance and refixing.(B) Dismantling the MS and CI works of any description such as sheets, shafts, cost iron wheels lath etc and taking down helical springs, rollers and other accessories etc.(C) Replacing the unserviceable accessories such as shafts, lock plate, helical springs, rollers lath sheets, cast iron wheels, including drilling, welding etc.(D) Cleaning, oiling, greasing etc complete of all movable parts all as required at site complete all as specified and as directed. Note: The parts and accessories to be replaced shall be measured and paid separately and any defects noticed during the period of contract the same shall be rectified by the contractor without any cost.)
Supply only mild steel lock plate 150mm width 3.15mm thickness reinforced with MS angle of 35x35x5mm at bottom including pulling handle sliding bolt etc complete all as specified and directed.
Supply only new helical springs of size n. exc 50 cm long as required for rolling shutters etc complete all as specified and as directed.
Supply only MS lath 1.25 mm thick for rolling shutter of size and description complete all as specified and as directed.
Supply only MS plain sheet 1mm thick as in hood cover for rolling shutters of size and pattern as approved complete all as specified and as directed.
S & F Steel rolling shutter (thickness of lath 1.25mm thick) without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated and including taking down of any thickness etc, complete push pull or manual type etc complete all as specified and directed.
Dismantling of CGI/PGI sheet roofing any gauge and any thickness including ridge, valley gutter etc complete all as specified and as directed.
M&L for Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe 410-W Gde E-250 quality A and complete all as specified and directed. .
Supply and fix rolled mild steel sections of Fe 410-W (GDE E-250) QUALITY “A” frame work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and as directed.
S&F wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and as directed.
Supply and fix pre-painted galvalume aluminium zinc coating galvanised based corrugated steel sheet of 0.50mm thick, AZ-150 of approved colour having tensile strength of 550 Mpa as roof covering/cladding to wall fixed with self tapping (SD) screws complete all as specified and as directed.
Supply and fix pre-painted galvalume aluminium zinc coating galvanised based plain steel sheet of 0.50mm thick, AZ-150 of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed.
M&L for new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and apply two coats of synthetic enamel paint (ordinary tint) including priming with red oxide, zinc chrome complete all as specified and as directed.
Dismantling mangalore pattern roofing tiles single layer including ridge tiles complete all as specified and as directed.
Dismantling mangalore pattern roofing tiles single layer including ridge tiles laid, bedded in cement mortar etc complete all as specified and as directed.
Dismantling battens for tiles any size exceeding 15cm in spacing complete all as specified and as directed.
Dismantling timber Scantling framed work in fillets, rails, posts, rafters, purlins, etc. under 40 Sqcm in section complete all as specified and as directed.
Dismantling timber Scantling framed work 40 sqcm and over in section, in any position complete all as specified and as directed.
M&L for Second class hard-wood Clean sawn in scantlings in timber framed for rafter and purlin in roof etc complete all as specified and directed.
All as per item No.89 here-in-before but except wood complete all as specified and directed. Note: Serviceable scantlings obtained from dismantling shall be reused.
S&F CGI sheeting 0.63 mm thick with two corrugation side lap fixed with L or J type bolts in roof walls etc with grade of zinc coating 275 gm/sqm complete all as specified and as directed.
All as per Sr item No. 91 here-in-before but except sheets complete all as specified and directed. Note: Serviceable CGI sheeting obtained from dismantling shall be reused.
S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with L or J type bolt, grade of zinc coating 275 gm/sqm complete all as specified and as directed.
M&L for second class hard wood (Salwood) clean sawn battens sectional area exc 5 sqcm and n exc 15 Sqcm at 30cm spacing complete all as specified and as directed.
M&L for 2nd class hard wood scantlings square or rectangular in section exc 13 Sqcm and n.exc 25 Sqcm clean sawn of size 50mmx50 mm used as rafter and purlin and fixed to CGI Sheet with self tapping screws complete all as specified and as directed.
All as per item 95 above but fixing only scantlings obtained from dismantling complete all as specified and as directed.
M&L for mangalore pattern roof tiles inter locking at side and joints laid dry complete all as specified and as directed.
All as per item No 97 here-in-before but except tile complete all as specified and directed. Note: Serviceable mangalore roof tiles obtained from dismantling shall be reused.
M&L for Ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and as directed.
All as per item No 99 here-in-before but except Ridge or hip tile complete all as specified and as directed. Note: Serviceable ridge obtained from dismantling shall be reused.
M&L for Filleting in any position and to any shape in cement mortar 1:4 sectional area exc 25 but n. exc 50 Sqcm complete all as specified and as directed.
M&L for Preparing surfaces of new wooden battens of any description or girth and applying two coats of creosote oil complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.
Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 complete all as specified and as directed
Taking down cement plaster from brick/stone wall of any description etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
Material and labour for rendering 15 mm thick on fair faces of brick work or stone masonary surfaces in cement mortar 1:4 and finished the surface smooth and even without using extra cement complete all as specified and as directed
Material and labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified and as directed
M & L for rendering 5 mm thick in cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth without using extra cement in patches n exc 3 Sqm each patch complete all as specified and as directed.
Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed.
Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash on ceilings complete all as specified and as directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer and wall putty etc complete all as specified and as directed.
Demolition of RCC water tank ,chajja of any description and in any position not otherwise specifically provided rainforced (rainforcement of cut as required to facilasite demolition etc) complete all as specifed and directed.
Taking down of old bituminous tarfelt or any other type of roof treatment from roof/ concrete surfaces removal to distance exceeding 250 metres and not exceeding 500 metres from the site and cleaning of the roof surface with wire brush to make it free from dust, dirt etc complete all as specified and as directed.
Material and labour for rendering 10mm thick on roof surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 3% by weight of cement and finished even and smooth complete all as specified and as directed Note: Water proofing compound will be measured and paid separately under relevant item in this schedule
Supply only water proofing compound complete all as specified and as directed.
M & L for providing water proofing treatment with APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick reinforced with polyester non oven fabric (weight not less than 150gm/Sqm) applied on one coat of oil based bitumen emulsion primer @ 0.3 lit per sqm (OR as per the directions of manufacturer instructions) including cleaning of surface thoroughly from dust, dirt and projections. Laying of membrane by forced (torch) application with 10cm overlaps. A coat of blown bitumen 85/25 grade @ 1.2 Kg/sqm to be applied on top of membrane, finally coating the surface with bituminous aluminium paint @ 100gm/Sqm complete all as specified and as directed.
M&L for making the grooves to 'V' section in existing parapet walls/columns over RCC roofs, cleaning out and tacked the polymeric membrane in to the grooves and sealed solidly with a hot mixture of bitumen and clean dry sand in the ratio of 1:1 by weight etc complete all as specified and directed.
M & L for wire brush and cleaning any type over roof and chhajja top surface etc, including flashings and junction of parapets, etc., and surface painting, with a layer of blown bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu. m per sq. m, and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and as directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cheaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repainring, etc. measured separately), exc 250& not exc 500 litrs tanks complete all as specified and as directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cheaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repainring, etc. measured separately) , exc 500 litrs & not exc 1000 litrs tanks complete all as specified and as directed.
Supply and fix in repairs 1000 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed
Supply and fix in repairs 500 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets etc complete all as specified and directed.
Supply and fix in repairs false ceiling of Mineral Fibre Acoustical Suspended Ceiling System with FINE EDGE TILES ARMSTRONG SILHOUETTE EXPOSED GRID SYSTEM. The tiles should have humidity Resistance (RH of 99%, NRC 0.55 Light reflectance 85% thermal conductivity K=0.052-0.057 w/m k. colour white, fire performance class O class 1 (BS476 Part 6 & 7) in module size of 600 x 600 x 16 mm thick with Bio black coating on the face of the tile, suitable for Green building application, with the re cycled content of 63%. The tile shall be laid on Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kg per Squaremetre. Silhouette main rummers & cross Tees to have mitred ends and "birdsmouth" notches to provide mitred Cruciform junctions. The Tee sections should have a galvanizing of 120 grams per squaremetre & passed through 500 hours of salt test complete all as specified and as directed. Note : The quoted rate is deemed to be inclusive of cost of necessary scaffolding work required at site. Make: Armstrong or equivalent as approved by GE
S & F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 38x24.7x0.30mm cross tee 26x24x0.30mm and wall angle 24x24x0.30mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc complete all as specified and and as directed
G SATISH REDDY AND CO
BHEEMRAO PATIL CONTRACTOR
S.R.M.K Enterprises
M/s GM Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .