Construction of 50 Beded Civil Hospital at Salooni in Tehsil Salooni District Chamba HP Construction of building portion, providing water supply and sanitary Installation, Rain water harvesting system, Construction of septic tank

Amount

Excavation in hilly area in all heights and depths and in all classification of soil by manual / mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/ wedging out rock (where blasting is prohibited) and their intermediate classification of soil setting out true to the required line, grades, width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification section 300 and 1600 and sorting out useful materials and stacking the same in all leads, lifts in acquired width of the road and transportation of un-useful materials for filling in road ways, camber embankments for grade improvements and disposal of all surplus material to the approved dumping sites through all modes of transportation including head load of animals transport or mechanical means along with its levelling fine dressing and hauling / carriage of machineries, material, tool equipments and safety measures. All useful material such as stone, shingles, aggregates and slates etcetra of sorted out and stacked in proper stack. Recovery of stone to the tune of 512.29 cum( Five hundred twelve point twenty nine cubic metre) quantity at the rate of rupees 300/- (rupees three hundred ) per cubic metre shall be effected from the contrcator,s running bill on pro-rata basis as per actual quantity executed. Any loss to the public/ private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him in all case.The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Earth work in excavation for structures in all depths as per drawing and technical specification clause 305 & 1603.4 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal in all lead and lift including dressing of sides and bottom and back filling in trenches with excavated Suitable materials. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution etc. and to protect stability of hill side rock shall be excavated with chiseling and wedging out rock (where blasting is prohibited). All earth work in cutting/excavation including rock excavation shall be carried out true to lines grades, side slopes, width, camber super elevation and level as shown on the drawings or as directed by the Engineer-in-Charge hauling and stacking of materials useful for construction at suitable sites and safe disposal of unsuitable cut materials in specified manner, filling of unevenness blind age and finishing the road to specified dimension or as directed by the Enginer-in-Charge. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage rain and other causes it shall be removed by suitable diversion, bailing out or pumping as directed and the area of the foundation or embankment shall be kept dry. Any loss to the public or private property during the course of excavation shall be the whole responsibility of the contractor which shall have to be duly compensated by him at his own cost in all cases.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete in sub-structure as per drawing and MORD technical specification section 800,900, 1200 & 1600 nominal mix 1: 4: 8 (one cement: four sand : eight graded crushed/broken stone aggregate 40mm (forty millimeters) nominal size and curing complete including pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of form work in retaining walls, breast walls etcetera or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Stone filling under floor /behind wing wall and return wall, retaining wall complete with the hard stone from approved quarry as per drawing and technical specification clause 1204.3.8 as per direction of Engineer-in-Charge including carriage of material within all leads and lift of material and other incidentals. The rate is including royalty, Malkana, Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing 100mm ( one hundred millimeter) diameter poly Vinyl chloride pipe Weep holes in brick masonry/stone masonry, plain/reinforced concrete abutments, wing walls return walls and retaining /breast walls etcetera, extending through the full width of the structure with slope of 1 (V):20 (H) (one vertical is to twenty horizontal ) towards drainage face complete as per drawings and MORD technical specifications clause 614,709,1204.3.7 or as directed by the Engineer-in-Charge ,including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana,Tol tax, sale tax GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete for plain / reinforced concrete M-15 (M- fifteen) with nominal mix 1:2.5:5 (one cement is to two and half sand is to five graded crushed stone aggregate 40mm (forty millimetre) nominal size) in or under water and curing complete for 14 (fourteen) days , in open foundations for all type of structures including pumping or bailing out water (surface and sub soil water) dewatering for all depths and any quantum of water including removal of slush which may arise at the time of laying under water complete for all heights / depths including the cost of form work complete as per drawings and M.O.R.D. technical specification Clauses 802,803,1202 and 1203 as directed by the Engineer-in-Charge including carriage of material within all leads ,lifts and other incidentals. The rate is including octroi,royality,Malkana,Tol tax, sale tax or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete in sub-structure as per drawing and MORD technical specification section 800,900, 1200 & 1600 nominal mix 1: 4: 8 (one cement: four sand : eight graded crushed/broken stone aggregate 20mm (twenty millimeters) nominal size including pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of form work in retaining walls, breast walls etcetera or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/ cement concrete in open foundation for all type of structure complete using plain cement concrete in drains and Parapets grade M-10 ( M ten) per cubic metre nominal mix 1:3:6 (one cement is to three sand is to six crushed stone aggregate 40mm(forty millimetre) nominal size) in or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths including the cost of form work as per drawings and. technical specification section 800, 900 and 1200.and to the entire satisfaction and direction of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete cement concrete for plain cement concrete 1:3:6 (one cement is to three sand is to six crushed stone aggregate 20mm(twenty millimetre) nominal size) in foundation and plinth and curing complete including cost of form work in or underwater including pumping or bailing out water (surface or sub soil water) dewatering for all depth/ height and any quantum of water including removal of slush which may arrise at the time of laying underwater complete as per drawing, design and technical specifications as per direction of Engineer-in-Charge and other incidental .The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and Laying of Interlocking Concrete Block Of NTC Pavements having thickness 80 mm (Eighty millimetre) thick as per drawings and Technical Specification Clause 1504and to the entire satisfaction and direction of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Excavation in foundation trenches, etcetera in all kinds of classification of soil such as pick work, jumper work, blasting work, jumper blasting work hard blasting or conglomerate strata including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring ,strutting dewatering and pumping or bailing out-water (surface and sub soil water) up to any depth and height and any quantum of water including slush which may arise during dewatering , removal of slush and stacking the serviceable and unserviceable material clear from the edge of excavation and then returning the stacked soil in 15 cm (Fifteen centimeter) layer when required into plinth sides of foundation etcetera consolidating each deposited layer by ramming and watering then disposing of the surplus unserviceable excavated earth as per HPPWD specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Excavation in drains and channels etcetra in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, blasting work both in soft and hard rock, chiesling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out ture to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable divertion pumping or bailing out and excavation shall be kept dry whereever so required by the contractor at his own cost as directed by the engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing in all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machinaries and other incidentals to complete the work as per HPPWD specification 1990 Vol.I. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming , consolidating and dressed complete including carriage of material within all leads , lifts and other incidental and as per the direction of Engineer-in-Charge .The rate is including octroi, royality, Malkana, toll tax , GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Foundation, footings basis of columns etcetra and mass concrete including carriage of material within all leads , lifts and other incidentals, and as per the direction of the engineer-in-charge .The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness including carriage of material within all leads and lifts and and other incidentals and as per the direction of the engineer-in-charge .The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan including carriage of material within all leads , lifts and other incidentals and as per the direction of the engineer-in-charge a.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point fifteen millimeter) thick welded with angle iron in frame 30X30X5mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights/ depths below supporting floor to ceiling upto all floor level and removal of the same for in-situ-reinforced concrete & plain concrete work in:-Stair cases with slopping or stepped soffits including rises and stringers excluding landing as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals. The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including carriage of material within all leads , lifts and other incidentals and as per the direction of the Engineer-in-charge .The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like including carriage of material within all leads , lifts and other incidentals and as per the direction of the engineer-in-charge and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto all width and heights including carriage of material within all leads , lifts and other incidentals and as per the direction of the engineer-in-charge .The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength 20 N/mm2 (twenty Newton per millimetre square) with cement contents not less than of 330 Kg/m (three hundred thirty kilogram per cubic metre) mechanicaly mixed and vibrated and curing complete excluding cost of form work and reinfocement for reinforced concrete work in foundation, footing, basis of columns and the like and mass concrete including carriage of material within all leads , lifts and other incidentals and as per the direction of the engineer-in-charge .The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20(M-Twenty) design mix to obtain the minimum compressive strength 20 N/mm2 (twenty Newton per millimetre square) with cement contents not less than of 320 Kg/m3 (three hundred twenty kilogram per cubic metre) mechanicaly mixed vibrated RCC work and curing complete excluding cost of form work in suspended floors ,roofs, landings,shelves and their supports,beams,girders, bressumers and cantilever upto floor all level including carriage of material and other incidentals and within all leads, lifts and other incidentals and as per the direction of the Engineer-in-charge.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength 20 N/mm2 ( twenty Newton per millimetre square ) with cement contents not less than 320 Kg/m (three hundred twenty kilogram per cubic metre) mechanicaly mixed, vibrated RCC work and curing complete excluding cost of form work and reinforcement concrete in stair case (except spiral stair case) excluding landing, butt including preparing or top surface and finishing of nosing upto all floor level , including carriage of materials within all leads and lifts and other incidentials and as per the direction of the Engineer-in-charge.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20(M-Twenty ) design mix to obtain the minimum compressive strength 20 N/mm2 (twenty Newton per millimetre square) with cement contents not less than 320 Kg/m (three hundred twenty kilogram per cubic metre) mechanicaly mixed , vibrated RCC work and curing complete excluding cost of form work in walls( any thickness but not less then 0.10 thickness(Zero point one zero metre) attached pillasters and bases string courses etcetera from top of foundation level upto floor all level and all heights including carriage of material within all leads , lifts and other incidentals and as per the directionof the Engineer-in-cahrge and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength 20N/mm2 (twenty Newton per millimetre square) with cement contents not less than 360 Kg/m (three hundred sixty kilogram per cubic metre) mechanicaly mixed , vibrated and curing complete excluding cost of form work in columns, pillars,posts and struts upto floor all level including carriage of material and other incidentals within all leads , lifts and as per the direction of the Engineer-in-charge .The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20(M-Twenty) design mix to obtain the minimum compressive strength 20 N/mm2 re (twenty Newton per millimetre square) with cement contents not less than 320 Kg/m (three hundred twenty kilogram per cubic metre) mechanicaly mixed, vibrated to give smooth and even surface including centering shuttering but excluding cost of reinforcement in windows cill and finishing of nosing upto all floor , including carriage of material within all leads , lifts and other incidentals and as per the directionof the Engineer-in-cahrge .The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying tor steel of TATA, TISCION / SAIL reinforcement for reinforced cement concrete work including bending, binding, cutting straighting and placing in position including cost of binding wire complete upto all floor level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Second class brick work using Rat & trap bond common burnt clay building bricks with as per Architectural Drawing in super structure above plinth level to all levels in cement mortar 1:4 ( one cement isto four sand) curing complete as per HP.PWD, specifications, approved drawings, design as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals. The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Brick masonry using second class common burnt clay building bricks in super structure above plinth level in all heights in cement mortar 1:6 ( one cement isto six sand) and curing complete upto all floor level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads, lifts and other incidentals. incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Half brick work using second class common burnt clay building bricks in super structure above plinth level in cement mortar 1:4 ( one cement isto four sand) and curing complete upto all floor level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals. The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Random rubble masonry with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20 mm (Twenty millimetre nominal size) at plinth level racking out joints in cement morrar 1:6 (1 cement : 6 sand ) up to floor to all level.as per HP.PWD, specifications, approved drawings, design as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals. The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of Hindalco/Jindal approved make Grade 63400 conforming to IS 733 (seven hundred thirty three) and IS:1285 ( one thousand two hundred eighty five ) anodised transparent or dyed to required shad according to IS: 1868 ( one thousand eight hundred sixty eight ). (Minimum anodic coating of grade AC 15(AC fifteen) ) fixed with rawl plugs and screws or with fixing clips,or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC /neoprene felt etcetera complete. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazing /panelling with C.P. brass/stainless steel screws all complete as per architectural drawings specifications and the directions of Engineer-In-Charge, including carriage of material within all leads , lifts and other incidentals. The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 12mm ( twelve millimetre) thick phenol bonded both sides prelaminated bwp grade particle board in matt finish ISI marked I.S. No. 12823 as per approved shade of greenlam for infill panels of all doors/SDB/DD action TESA/Kitply and or Uro mica board partitions with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of material with in all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge . The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing lead lined shutters including black enamelled/bright finished M.S. butt hinges with necessary screws all complete as per architectural drawings and direction of Engineer-in-Charge incluidng carriage of material within all leads , lifts and other incidentials and as per the direction of Engineer- in- Charge.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing in position anodised aluminium shutter for door, window, ventilators including providing and fixing inges/ pivots and making provision for fiaing of fitting wherever required including of PVC/neoprove gasket as rerquired extrusion section of Jindal/ Hindalco as per approved shade , aluminium work for door window, ventilator and partition with extruded built up standard tubular and other sections of grade 63400 WP approved make confirming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868 ( minimum anodic coating of grade AC 15 ) fixed with rawlplugs and screws or with fixing clips, necessary filling up of gaps at junctions, at top ,bottom and side etc. Aluminium sections shall be smooth with required PVC/ neoprene rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazing/ panelling C.P. brass/ stainless steel screws all complete as per architectural drawings, specifications and direction of Engineer-in-Charge incluidng carriage of material, within all leads, lifts and other incidentials and as per the direction of Engineer- in- Charge.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetra with PVC/ neoprene gasket etcetra with pan glass of MODI guard/Saint Gobian of 5.00mm (five millimetre) thickness (weight not less than 13.75 Kg( thirteen decimal seven five kilogram) per square metre including carriage of material within all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge . The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing fly proof galvanised stainless steel (Grade 304) wire gauge of IS gauge designation 85 g (eighty five guage) with wire of dia 0.50 mm ( zero point five zero millimetre) and 1.4 mm(one point four millimetre) aperture on both side with to windows and clerestory windows 60x20 mm ( sixty into twenty millimetre) beading including carriage of material with in all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PGI sheet on the inner side of aluminium shutter / partical boards/ply wood sheets with screw and nails complete including carriage of material with in all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge . The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 250 x 16mm (two hundred fifty into sixteen millimetre) anodized aluminium sliding door bolt anodized colour and shade with bolts , nuts and screws etcetera complete including carriage of material with in all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge . The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminum tower bolts (barrel type) of seccelor anodized transparent or dyed to required shade and colour with necessary screws etcetera complete 250x10mm ( two hundred fifty into ten millimetre) as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminum tower bolts (barrel type) of seccelor anodized transparent or dyed to required shade and colour with necessary screws etcetera complete 200x10mm ( two hundred into ten millimetre) as per HP.PWD, specifications, approved drawings, designs, as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminum tower bolts (barrel type) of seccelor anodized transparent or dyed to required shade and colour with necessary screws etcetera complete 150x10mm. (One hundred fifty milimetre into ten milimetre.) as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads, lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing door closure with necessary screws including carriage of material with in all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge .The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 125 mm (one hundred twenty five millimetre) aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etcetera complete including carriage of material with in all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge .The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimetre) aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etcetera complete including carriage of material with in all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge .The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm ( one hundred millimetre) aluminium anodized floor door stopper with rubber cushion screws etcetera to suit shutter thickness complete including carriage of material , with in all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge s.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimetre) aluminium anodized hard drawn hooks and eyes including carriage of material, with in all leads , lifts and as per the direction of Engineer-in-Charge and other incidentials.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 25mm(twenty five centimetre) diameter stainless steel curtain rod and brackets complete in all respect including carriage of matrial, with in all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium anodised powder coated grill pattern to existing window/ ventilatior with 80mmx80mm (eighty millimetre into eighty millimetre) panels holes with 25x8mm (twenty eight into eight millimetre) thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frame (aluminium channels base frame to be measured and paid for separately) including carriage of material within all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge .The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing frosted glass 4 mm (four millimetre) thick with glass panes of Modi Guard/Saint Gobian with putty and nails complete , including all leads and lifts as per the direction of Engineer-in-Charge .The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing ACP tiles ceiling with (frame work to be measured and paid for separately).including carriage of material within all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge. The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (nineteen millimetre) thick water proof termite resistant Commercial Board of Action Tesa/Kitply/ Greenlam confirming to IS- no.1659 or its equivalent water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete) including carriage of material within all leads, lift and other incidentals and as per the direction of Engineer-in-Charge .The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm thick water proof termite resistant Commercial Board of Action Tesa/Kitply/ Greenlam confirming to IS- no.1659 water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of material within all leads, lift and other incidentals and as per the direction of Engineer-in-Charge .The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 1st class Indian teak wood square edges cover fillets (beading) 19mmx6mm (nineteen millimetre into six millimetre) section including mitring at junctions with wood screws and nails complete including carriage of material within all leads, lift and other incidentals and as per the direction of Engineer-in-Charge .The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 1.00mm (one millimetre) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etcetera complete including carriage of material within all leads, lift and other incidentals and as per the direction of Engineer-in-Charge .The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 65x35mm (sixty five into thirty five millimetre). Special quality bright finished brass cup board locks or wardrobe locks with six levers including necessary screws etcetera complete. (Indian make of approved quality) including carriage of material within all leads, lift and other incidentals and as per the direction of Engineer-in-Charge.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying ceramic tiles 300x600 mm ( three hundred millimetre into six hundred millimetre) of Johnson /Nitco / orient Belf up to 110 cm ( one hundred ten centimetre) height with 5 cm (five centimetre) marble Band pathi above it in cement mortar 1:4 (one cement isto four sand) as per detail drawing and specification as per direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidential.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 25 mm ( twenty five millimetre) thick kota stone flooring laid over 20 mm (twenty millimetre) thick base of cement mortar 1:4 ( one cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of kota stone including rubbing and polishing to granolithic finish upto all floor level, as per approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 2mm (two milimetre) thick seamless static Palse Vinyl tiles flooring size 60x60 cm (sixty into sixty centimetre) of approved shade of LG Hausys plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) including carriage of material and other incidentials, with in all leads , lifts and as per the direction of Engineer-in-Charge .The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying ceramic tiles in flooring 300x300 mm ( three hundred millimetre into three hundred millimetre) Grade-IV of Johnson/Nitco/Orient-Bell with coving NTC/ Johsnson treads of steps laid on a bed of 12 mm ( twelve millimetre) thick cement mortar 1:3 ( one cement into three sand) finished with flush pointing in white cement as per specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.t.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 20mm( twenty millimetre) thick acid proof Resistant ceramic tiles of Johnson/NITCO/Orient-Bell size upto 600 x 300mm (six hundred into three hundred millimetre) of specified shade inskirting /Dado laid on a bed of 12mm. thick cement mortar 1:3(1 cement: 3 sand) jointing with cement slurry mixed,and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

40 mm ( forty millimetre) Cement concrete flooring 1:2:4 ( 1 cement : 2 sand : 4 crushed stone aggregate 20 mm (twenty millimetre) nominal size laid in one layer finished with a floating coat of neat cement as per specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying vitrified floor tiles of size 600x600 mm (six hundred six hundred millimetre) sizes (thickness to be specified by the manufacturer) Johnson ?Nitco/Orient-Bell with having NTC/Johnson with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS:15622, of approved colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetera, complete as per specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals..The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying tactile tile of Johnso /NITCO/Orient-Bell (for vision impaired persons as per standards) of size 300x300mm ( three hundred into three hundred millimetre) having with water absorption less than 0.5% ( zero point five percent) and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etcetera laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentials .The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Kota stone slab 25 mm (twenty five millimetre) size 55 x55 cm ( fifty five into fifty five centimetre) thick in risers of steps,skirting dado and pillars laid on 12 mm (twelve millimetre) (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete as per direction of Engineer-in Charge including carriage of materials with in all leads, lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

White glazed tiles of Johnson/ Nitco/ Orient-Bell 6 mm (six millimetre) thick in skirting risers of steps and dado 12 mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry [size 30cm x 45cm (thirty centimetre into forty five centimetre) as per specification]including carriage of materials with in all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge . The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm (Eighteen millimetre) thick stone slab over 20 mm (twenty millimetre) (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing semi/Round nosing curing and polishing etcetera all complete as specified and as directed by the Engineer-in-Charge , including carriage of materials with in all leads, lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement water proofing treatment with Dr. FIXIT FAST FLEX of equivalent 6-7sqm/kg (six desh seven square meter per kilogramme) with two component polymer modified comentitious coating consisting of comentitious power and a polimer liquid in two coats for 1st coat :- clean and saturate surface and then applying a coat of Dr. FIXIT and the same process shall be extended upto 300 mm (three hundred millimeter) vertically, the second coat shall be applied in opposite direction after four to six hours of application of first coat than sprinkle sand on top surface of applied Dr. FIXIT then apply cement mortar 1:4 ( one cement : 4 sand) and admixed with 200 ml (two hundred) of pidiproof LW @ 200 ml ( two hundred) per 50 kg (fifty kilogramme) bag complete as per architect drawing , specifications and as per direction of Engineer-in-Charge, including carriage of material within all leads , lift and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 150 mm ( one hundred fifty millimetre ) dia on wall face PVC pipe of SUPREME / FINOLEX D-plast/ Prince for rain water pipes of working pressure not less than 4.5 kg/cm2 (four point five ) kilogram per square centimeter including filling the joints with approved adhesive complete including carriage of material within all leads , lift and other incidentals and as per direction of Engineer-in-Charge .The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing150 mm ( one hundred fifty millimetre) dia M.S. holder bat clamps of approved design to PVC or PVC pipes embedded in and including cement concrete blocks 10 x10x 10 cm ( ten into ten into ten centiimetre) of 1:2:4 mix (one cement: two sand: four graded crushed stone aggregate 20mm ( twenty millimetre ) nominal size) and cost of cutting holes and making good the wall etcetera including carriage of material within all leads, lift and other incidentals and as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face PVC accessories of SUPREME/FINOLEX /D-plast for rain water pipes including filling the joints with approved adhesive complete PVC plain bend 150mm dia (one hundred fifty millimetre diametre) including carriage of material with in all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing on wall face PVC /SUPREME/FINOLEX D-plast accessories for rain water pipes including filling the joints with approved adhesive complete PVC shoe 150mm dia (one hundred fifty millimetre diametre) including carriage of material with in all leads, lifts and other incidentals and as per the direction of Engineer-in-Charge .The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 0.60mm ( Zero point sixty millimeter) thick pre-painted steel sheet of TATA/DUROSHINE /SAIL in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 ( Twenty ) micron over 5 ( Five ) miocrons primer coating to back coat of polyster of 5 ( Five ) microns over 5 ( Five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts , 6mm ( six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials with in all leads ,lifts and other incidentals and as per the direction of Engineer-in-Charge . The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing ridges or hips having proper Gola shape 90cm. (Ninety centimetres)overall with 0.60mm ( Zero point sixty millimeter) thick prepainted steel sheets of TATA/DUROSHINE/Sail in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester (RMP) organic coating of 20( Twenty ) microns over 5 ( Five ) micron primer coating + back coat of polyster of 5 ( Five) microns over 5 micro primer coating including fixing with prepainted iron, J or L hooks bolts and nuts ,6mm(Six milimetre) diametre and prepainted G.I limpet and bitumen washer complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material with in all leads, lifts and other incidentals and as per the direction of Engineer-in-Charge . The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing valley 90 cm (Ninety centimetres) overall with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet of TATA/ Doroshine/Sail in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia (six millimetre diameter) with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material with in all leads , lifts other incidentals and as per the direction of Engineer-in-Charge . The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing flashing 38 cm (thirty eight centimetre) over all with 0.60 mm (zero point six zero millimetre) thick pre-painted steel sheet of TATA/ /DUROSHINE /SAIL in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 ( Twenty ) micron over 5 ( Five ) miocrons primer coating to back coat of polyster of 5 ( Five ) microns over 5 ( Five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts , 6mm ( six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials with in all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge . The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing, 30 cm.(thirty centimeter) Wide 30cm.( thirty centimeter) deep plain G.I sheet gutters fixed with bolts and nuts and washer etcetera including making necessaary connections with rain-water pipe complete as per design with 0.63mm (zero point six three millimetre) thick sheet having dome shape Grating which shall be of MS flat 25x5/6 mm ( twenty five into five obliqe six millimetre) and have square/ round bar of 6 mm (six millimetre) diametre in Dome to avoid blockage of water as per specifications, approved drawings, design as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing M.S B.P sheet of TATA/SAIL 2 mm ( two millimeter) thick in eaves board/facia/soffits/ceiling including cutting , fixing and welding to steel roof members and applying a coat of red lead primer complete as per the direction of the Engineer-in-Charge (base member of steel work shall be measured and paid for separately) as per specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Steel work welded in built up sections of TATA/SAIL , trusses and framed work, including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in beams joists, channels ,angles ,tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like, as per specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Steel work welded in built up sections of TATA/SAIL trusses and framed work, including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint In Trusses and trussed purlins in building as per specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Steel work welded in built up sections of TATA/SAIL trusses and framed work, including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint In gratings framed guard bars,ladders,railling,brackets and similar works, as per specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing stair case railing having wooden hand raill of hard wood 75x 65mm (seventy five into sixty five millimetre) and baluster of 19mm x 19mm (nineteen millimetre into nineteen millimetre) M.S. solid square bar in combination with M.S. Flat 19x6 mm (nineteen millimetre into six millimetre). M.S. solid square bar 60cm (sixty centimetre) centre to centre jointing in cement concrete step and jointing with electric / gas welding alongwith vertical cluster to be welded/ jointed with nos. M.S. flat of 40x60mm (forty into sixty millimetre)below wooden hand rail complete with applying two coat of red led paint including carriage of material with in all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge . The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing having 50 mm (fifty millimetre) diametre M.S. hollow pipe hand rail slip resistant in ramp with round ends at two levels at 75 cm (seventy centimetre ) and 90 cm (ninety centimetre) heiight welded with 25 mm (twenty five millimetre) diametre hollow pipe balusters embedded in cement concrete 60 cm (sixty centimetre) centre to centre and jointing with electric/ gas welding at top along with hand rail of hollow M.S. pipe of 50 mm (fifty millietre) diametre . It should extend 30 cm (thirty centimetre) beyond top and bottom of the ramp as per approved drawing , design and specifications including carriage of material with in all leads, lifts and other incidentals and as per the direction of Engineer-in-Charge . The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Supplying of Ready made steel Almirah of Godrej /Wipro of approved shade. Ready made stainless steel work station of approved shade as per detail drawing including carriage of material with in all leads , lifts and other incidentals and as per the direction of Engineer-in-Charge . The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X6 mm ( forty into forty into six millimetre) thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 50X25 mm (fifty into twenty five millimetre) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two decimal five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in- Charge including carriage of material with in all leads , lifts and other incidentals , as per the direction of Engineer-in-Charge . The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing fixed steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm (sixteen into three decimal one five millimetre) lugs 10 cm. (ten centimetre) long embedded in cement concrete blocks 15 cmx10cmx10cm (fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6(1cement:3 sand:6 graded stone aggregate 20mm (twenty centimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete as directed by Engineer-in- Charge,as per the direction of Engineer-in-charge including carriage of material with in all leads , lifts and other incidentals as per the direction of Engineer-in-Charge and other incidentials . The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 40mm dia (forty millimetre) (D-section) MS hollow pipe parapet railing 90cm (ninety centimetre) height or as per architect drawing design welded with 19x19mm (nineteen into nineteen millimetre) and 12x12mm (twelve into twelve millimetre) solid square balusters fixed over RCC copping at the rate of 60 cm (sixty centimetre)centre to centre in combination and jointing with electrical gas welding at top alongwith MS hlollow pipe with 2 Nos. (two number) MS (mild steel) flat of 50x5mm (fifty into five millimetre) complete as per approved drawing , design and specifications.as per the direction of Engineer-in-charge, with in all leads and lifts as per the direction of Engineer-in-Charge and other incidentials . The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

6 mm thick (six millimetre) cement plaster to ceiling in cement mortar 1:3 ( one cement isto three sand ) upto all floors level, curing complete as per specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is inclusive of all types of taxes imposed by the Government.

15 mm ( fifteen millimetre) thick cement plaster in single coat on the rough side of brick /concrete/stone / walls for interior plastering upto floor all level, curing complete including arrises internal rounded angles chamfers and or rounded angles not exceeding 80 mm ( eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement isto six sand) upto all floor level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

15 mm ( fifteen millimetre) thick cement plaster in single coat on the rough side of brick /concrete/stone / walls plastering upto floor all level and curing complete including arrises internal rounded angles chamfers and or rounded angles not exceeding 80 mm ( eighty millimetre) in girth and finished even and smooth in cement mortar 1:3 ( one cement isto three sand) as per HP.PWD, specifications, approved drawings, design and as per the directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

15 mm ( fifteen millimetre) thick cement plaster in single coat on the fair side of brick /concrete/stone / walls for interior plastering upto floor all level and curing complete including arrises internal rounded angles chamfers or rounded angles not exceeding 80 mm ( eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement isto six sand) upto all floor level as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

20 mm (twenty millimetre) thick cement plaster of pattern with groove 19 mm x12 mm (nineteen millimetre into twelve millimetre) at the rate of 30 cm (thirty centimetre) interval with cement mortar 1:4 ( one cement isto four sand) complete upto all floor level and curing complete as per HP.PWD, specifications, approved drawings, design as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

15 mm ( fifteen millimetre) thick cement plaster in single coat on the fair side of brick /concrete/stone / walls for interior plastering upto floor all level and curing complete including arrises internal rounded angles chamfers or rounded angles not exceeding 80 mm ( eighty millimetre) in girth and finished even and smooth in cement mortar 1:5 ( one cement isto five sand) upto all floor level as per HP.PWD, specifications, approved drawings, design, as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government.

Providing raised band of 7.5cm ( seven point five centimetre) wide, 12 mm (twelve millimetre) thick in cement mortar 1:4 (1 cement : 4 fine sand), curing complete as per the specifications, approved drawing, design , as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

20mm (twenty millimetre) thick Barium Sulphate plaster in the ratio of 25% : 65% :10% ( twenty five percent: sixty five percent ; ten percent) (the ratio of barium , sand, cement) in single coat on rough side of brick/stone masonry for interior plastering upto floor two level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Applying two or more coat of priming coat over on new steel surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with ready mixed paint of approved shade as per HP.PWD, specifications, approved drawings, design, as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rates inclusive all types of taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with Asian/Nerolac paint under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foreign matter with ready mixed paint of approved shade including carriage of material as per HP.PWD, specifications, approved drawings, design as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Applying priming coat two or more coats with Asian/Nerolac paint over new wood and wood based surface after and including preparing the surface by thoroughly cleaning the surface , grease, dirt and other foreign matter sand papering and knotting with ready mixed paint of approved shade as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Painting two or more coats with Asian/Nerolac paint ( excluding priming coat ) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface oil, dirts dust and other foreign matter sand papering and stoping with enamel paint other than white as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Applying spirit or oil stains two or more (any colour)on wood and wood based surfaces to given an even surfaces including cleaning the surfaces of all dirt,dust and sand papering so as to produce a smooth dry and matt surface including stopping & knotting as per HP.PWD, specifications, approved drawings, design as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Polishing two or more coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood filler, as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Wall painting with synthetic enamel paint two or more coats of Nerolac/Asian paint of approved shade as per HP.PWD, specifications, approved drawings, design as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Wall painting two or more coats with acrylic emulsion paint of Asian/Nerolac for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing thesurface free from mortar droppingand other foreign matter and sand papered smooth including applying of putty a required for metling thesurface manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Painting two or more coats with synthetic/Satin enamel paint of Asian/NEROLAC paint of approved brand and manufacture of required colour to give an even shade, as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Wall painting work with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etcetera complete. as per HP.PWD, specifications, approved drawings, design as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Applying two or more coat of Acrylic primer of Asian/Nerolac on new concrete/masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete as per HP.PWD, specifications, approved drawings, design as per the entire satisfaction an directions of the Engineer-in- Chargeincluding carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Applying two or more coat of Acrylic synthetic Washable distemper of Asian/Nerolac for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete,as per HP.PWD, specifications, approved drawings, design, as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Distempering (two or more coats) with Ist quality oil bound washable distemper of Asian/Nerolac and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Applying two or more coats of Birla white KJ wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops ,dust,loose materials and other foreign matter sand papering smooth to give final matter finish to the surface complete as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads, lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Finishing wall with weather proof two or more coat exterior grade emulsion of approved brand of Asian /Nerolac/Apex paint brush and final finish paint of required shade on undecorated wall surfaces (two coats)to give an even shade and final finish after thoroughly brushing the surface to remove all dirt dust other foreign matter etc. including carriage of material as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Providing Plinth protection with 40 mm (forty millimetre) thick inter locking paver blocks of NTC and 23 cm (twenty three centimetre) diametre half round R.C.C. pipe for drainage purpose fixed over 10 cm (ten centimetre) thick cement concrete 1:4:8 ( one cement isto four sand isto eight graded stone aggregate 25 mm (twenty millimetre) size bedding/ pipe haunching as per HP.PWD, specifications, approved drawings, design as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing expansion joint system related with wall joints (internal/ external location as per drawing and direction of Engineer-in-Charge . The joints shall be filled up with polysterence back or rod base members, self aligning/ centering arrangement and support . The material shall be such that it provide an expansion joint system suitable for vertical wall to wall to corner application, both new and existing construction in office building and complexes with no slipping down tendency amongest the components of the joint system. The joint system shall utilize light weight polysterence back or rod surfaces mechanically snap locking the multicellular to facilitate movement complete as per approved architectural drawings, design and specification and as per direction of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals.The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying in trenches galvanised mild steel tubes 25 mm (Twenty five milimeter) B.S.T/ JINDAL/ TATA STEEL TUBE LTD ( Medium grade )tube fittings (earth work in trenches to be measured and paid separataly). including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in- charge.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Providing and laying in trenches galvanised mild steel tubes 15 mm (Fifteen milimeter) B.S.T/ JINDAL/ TATA STEEL TUBE LTD /PRAKASH SURYA ( Medium grade )tube fittings (earth work in trenches to be measured and paid separataly) including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in- charge.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 15mm (fifteen millimeter) nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) of TATA/ Jindal/B.S.T. tube fitting and clamps including making good the wall, ceiling and floor.(earth work in trenches to be measured and paid separataly). including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in- charge.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 20mm (twenty millimeter) nominal bore to wall ceiling and floor galvanised mild steel tubes BST / JINDAL/ TATA STEEL TUBE (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor.Medium grade )tube fittings (earth work in trenches to be measured and paid separataly). including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in- charge.The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) composite pressure pipe U.V. stablized with carbon black confirming to IS-15450-2004 of Kitec/ Supreme water supply pipe for hot/cold water including clamp at one metre spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall 1620 (16 mm O.D. pipe) as per specification, including carriage of material within all leads, lift and other incidentals, as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) composite pressure pipe U.V. stablized with carbon black confirming to IS-15450-2004 of Kitec/ Supreme for water supplypipe for hot/ cold water including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall 2025 (25 mm O.D. pipe, as per specifications, including carriage of material within all leads, lift and other incidentals, as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing composite and seal compressive fittings as per IS-15450-2004 for cold/ water supply e.g. tees, elbows, reducers, connectors and clamps of Kitec/ Supreme with jointing, testing and fitting complete including cutting and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed in wall complete as per specification, approved drawings, design and including carriage of material within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government. Providing and fixing 1620 mm (one thousand six hundred twenty millimetre) equal tee

Providing and fixing composite and seal compressive fittings as per IS-15450-2004 for cold/ water supply e.g. tees, elbows, reducers, connectors and clamps of Kitec/ Supreme with jointing, testing and fitting complete including cutting and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed in wall complete as per specification, approved drawings, design and including carriage of material within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government. Providing and fixing 2025 mm(two thousand twenty five millimetre) equal tee

Providing and fixing composite and seal compressive fittings as per IS-15450-2004 for cold/ water supply e.g. tees, elbows, reducers, connectors and clamps of Kitec/ Supreme with jointing, testing and fitting complete including cutting and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed in wall complete as per specification, approved drawings, design and including carriage of material within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government. Providing and fixing Female branch Tee 1620x1620x20mm (one thousand six hundred twenty into one thousand six hundred twentyinto twenty millimetre)

Providing and fixing composite and seal compressive fittings as per IS-15450-2004 for cold/ water supply e.g. tees, elbows, reducers, connectors and clamps of Kitec/ Supreme with jointing, testing and fitting complete including cutting and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed in wall complete as per specification, approved drawings, design and including carriage of material within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government. Providing and fixing Female branch Tee 2025x2025x25mm (two thousand twenty five into two thousand twenty five into twenty five millimetre)

Providing and fixing composite and seal compressive fittings as per IS-15450-2004 for cold/ water supply e.g. tees, elbows, reducers, connectors and clamps of Kitec/ Supreme with jointing, testing and fitting complete including cutting and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed in wall complete as per specification, approved drawings, design and including carriage of material within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.Providing and fixing Female elbow 1620x20 mm (one thousand six hundred twenty into twenty millimetre)

Providing and fixing composite and seal compressive fittings as per IS-15450-2004 for cold/ water supply e.g. tees, elbows, reducers, connectors and clamps of Kitec/ Supreme with jointing, testing and fitting complete including cutting and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed in wall complete as per specification, approved drawings, design and including carriage of material within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government. Providing and fixing Female elbow 2025x25 mm (two thousand twenty five into twenty five millimetre)

Providing and fixing composite and seal compressive fittings as per IS-15450-2004 for cold/ water supply e.g. tees, elbows, reducers, connectors and clamps of Kitec/ Supreme with jointing, testing and fitting complete including cutting and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed in wall complete as per specification, approved drawings, design and including carriage of material within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.Providing and fixing male thread connector 1620x20 mm (one thousand six hundred twenty into twenty millimetre)

Providing and fixing composite and seal compressive fittings as per IS-15450-2004 for cold/ water supply e.g. tees, elbows, reducers, connectors and clamps of Kitec/ Supreme with jointing, testing and fitting complete including cutting and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed in wall complete as per specification, approved drawings, design and including carriage of material within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.Providing and fixing male thread connector 2025x25 mm (two thousand twenty five into twenty five millimetre)

Providing and fixing composite and seal compressive fittings as per IS-15450-2004 for cold/ water supply e.g. tees, elbows, reducers, connectors and clamps of Kitec/ Supreme with jointing, testing and fitting complete including cutting and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed in wall complete as per specification, approved drawings, design and including carriage of material within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.Providing and fixing coupler 1620 mm (one thousand six hundred twenty millimetre)

Providing and fixing composite and seal compressive fittings as per IS-15450-2004 for cold/ water supply e.g. tees, elbows, reducers, connectors and clamps of Kitec/ Supreme with jointing, testing and fitting complete including cutting and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed in wall complete as per specification, approved drawings, design and including carriage of material within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.Providing and fixing coupler 2025 mm (two thousand twenty five millimetre)

Providing and fixing composite and seal compressive fittings as per IS-15450-2004 for cold/ water supply e.g. tees, elbows, reducers, connectors and clamps of Kitec/ Supreme with jointing, testing and fitting complete including cutting and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed in wall complete as per specification, approved drawings, design and including carriage of material within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.Providing and fixing Reducers 1620x1216 mm (one thousand six hundred twenty into one thousand two hundred sixteen millimetre)

Providing and fixing composite and seal compressive fittings as per IS-15450-2004 for cold/ water supply e.g. tees, elbows, reducers, connectors and clamps of Kitec/ Supreme with jointing, testing and fitting complete including cutting and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed in wall complete as per specification, approved drawings, design and including carriage of material within all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.Providing and fixing Reducers 2025x1216 mm (two thousand twenty five into one thousand two hundred sixteen millimetre)

Providing and fixing 110 mm ( one hundred ten millimetre) diameter high pressure PVC spigot and socket, waste and ventilating pipes 4.6 mm (four point six millimetre) thick of Finolex /Supreme/Prince ISI marked including fixing with approved adhesive etcetera complete, as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 160 mm ( one hundred sixty millimetre) diameter high pressure PVC spigot and socket, waste and ventilating pipes 8 mm (eight millimetre) thick of Finolex/ Supreme/Prince ISI marked including fixing with approved adhesive etcetera complete ,as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 1000 (one thousand ) litre capacity PVC water storage tank of Supreme/Sintex /Finolex of three layers of ISI : 12701 marked , G.I. inlet and outlet connection , 15 mm ( Fifteen millimeter) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level, as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 110x 90 mm (one hundred ten into ninety millimetre) PVC floor trap ISI marked of Supreme / Finolex/prince/Kitec of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetera complete including fixing with approved adhesive etcetera complete, as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 110 mm dia ( one hundred ten millimetre) diametre PVC single equal branch with oval access door, ISI marked of supreme/Finolex/Prince/ Kitec insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etcetera complete.including fixing with approved adhesive etcetera complete, as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 110 mm dia ( one hundred ten millimetre) diametre PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked Supreme / Finolex/prince/Kitec complete including fixing with approved adhesive etcetera complete, as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 110 mm dia ( one hundred ten millimetre) diametre PVC single equal branch plain ISI marked Supreme / Finolex/prince/kitec including fixing with approved adhesive etcetera complete,as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 110 mm dia ( one hundred ten millimetre) diametre PVC collers ISI marked Supreme / Finolex/prince/Kitec including fixing with approved adhesive etcetera complete, as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 160 mm dia ( one hundred sixty millimetre) diametre PVC collers ISI marked Supreme / Finolex/prince/ Kitec including fixing with approved adhesive etcetera complete,as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government including carriage of materials with in all leads anfd lifts. The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 110 mm dia ( one hundred ten millimetre) diametre PVC plain bend ISI marked supreme / Finolex/prince including fixing with approved adhesive etcetera complete, as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 160 mm dia ( one hundred sixty millimetre) diametre PVC plain bend ISI marked supreme / Finolex/prince/Kitec including fixing with approved adhesive etcetera complete, as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 110 mm dia ( one hundred ten millimetre) diametre PVC double equal branch supreme / Finolex/prince/kitec with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete, as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 110 mm dia ( one hundred ten millimetre) diametre PVC supreme / Finolex/prince/Kitec plain double equal branch ISI marked including fixing with approved adhesive etcetera complete, as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 110 mm dia ( one hundred ten millimetre) diametrePVC supreme / Finolex/prince/Kitec clamps ISI marked of approved design with steel screws and rawal plugs etcetera complete,as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 110 mm dia ( one hundred ten millimetre) diametre PVC "Y" junction supreme / Finolex/prince with oval access door, insertion rubber washer 3 mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete,as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 110 mm dia ( one hundred ten millimetre) diametre PVC plain "Y" junction ISI marked supreme / Finolex/prince./Kitec including fixing with approved adhesive etcetera complete, as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) (Earth work, bed concrete, foot rest and trap to be measured and paid for separately).Orrissa Pattern pan No 20004 size 58x40 cm (fifty eight into forty centimetre) with low level PVC cistern of Hindware/ Ceraj /Jaguar/Jal of first quality white shade as per specifications including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing vitreous China wash down,water closet (European type. W.C. pan) seat No- 20011 of CERA /HINDWARE / Jaguar/ Jalof Ist quality in white shade as per specification with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately), including carriage of materials with in all leads, lifts and other injcidentals, As per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government (Anglo Indian Universal closet)

Providing and fixing plastic seat (Solid ) and cover of Cera/ Hindware/Jaguar/Jal of Ist quality in white shade as per specification for wash down water closet with C.P. Brass hinges and rubber buffers : Solid type including carriage of material with in all leads , lifts and other incidentals , as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government , white plastic seat and cover

Providing and fixing in position brass mosquito proof coupling for over flow pipe of 25mm (twenty five millimetre) nominal dia (over flow pipe to be measured and paid for separatey). including carriage of materials with in all leads , lifts. and other incidentals , as per direction of Engineer-in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing vitreous China bowl Flat back (small) No 60001 of Hindware/ Cera/Jaguar/Jal of Ist quality white shade pattern urinal including connection the urinal with waste pipe by means of white lead mixed with choppe hemp (weste pipe to bemeasured and paid for separately, including cistern of Hindware/Cera make, including carriage of materials with in all leads anfd lifts. The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing division plate for Urinal of Hindware/Cera/Jal/Jaguar of Ist quality white shade including carriage of material up to all leads , lifts and other incidentals and as per direction of Engineer incharge. Size 600x300 mm ( six hundred into three hundred millimetre) vitreous China. The rate is including royality, Malkana,Tol tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing stainless steel kitchen of overall size 470x420 mm (four hundred seventy into four hundred twenty millimetre) of diamond or its equivalent sinks standard ISI make with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting, including carriage of materials with in all leads , lifts and other incidentals, as per direction of Engineer-in-Charge . The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing vitreous chinawash basin Standard Category no. 10001 size 55x40x83 cm ( fifty five into forty into eighty three centimetre) in Ist quality white shade of CERA/ HINDWARE /jaguar/Jal with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fitting , as per specification, including carriage of material with in all leads , lifts and other incidentals and as per direction of Engineer - in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing vitreous chinawash basin Standard Category no. 10001 size 55x40x83 cm ( fifty five into forty into eighty three centimetre) oval type under counter in Ist quality white shade of CERA/ HINDWARE /jaguar / Jal with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fitting as per specification, including carriage of material with in all leads , lifts and other incidentals and as per direction of Engineer - in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing vitreous China padedstal for wash basin complete recessed at the back for the reception of pipes and fittings of CERA/HINDWARE/JAGUAR/Jal of Ist quality white shade , as per specification, including carriage of material with in all leads , lifts and other incidentals and as per direction of Engineer - in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing 32 mm dia (thitry two millimetre diametre) rubber plug for sink / wash basin complete including carriage of material with in all leads , lifts and other incidentals and as per direction of Engineer - in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing 32 mm dia (thitry two millimetre diametre) C.P. Brass waste Ist marked IS No-8934 OF JAL/ JAgUAR/ ESS for wash basin or sink :complete as per specification, including carriage of material with in all leads , lifts and other incidentals and as per direction of Engineer - in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing 32 mm dia (thitry two millimetre diametre) M.I. Union for wash basin or sink complete as per specification, including carriage of material with in all leads , lifts and other incidentals and as per direction of Engineer - in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing 15 mm (fiftten millimetre) G.I./M.I Union complete as per specification, including carriage of material with in all leads , lifts and other incidentals and as per direction of Engineer - in-Charge. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing 600x 450 mm ( six hundred into four hundred fifty millimeter ) beveled edge mirror of Hindware/Cera/Jaguar/Jal of superior glass mounted on 6 mm (six millimeter) thick A.C. (asbestos cement) sheet or plywood sheet and fixed to wooden plugs with C.P. (chromium plated) brass screws and washers as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rates is inclusive of all types of taxes imposed by the Government.

Providing and fixing PVC Coloured / white high density polythelene / poly propylene 10 litres (Ten litres) capacity ( full flush) European standard control low level flushing cistern with dual flushing cistern of CERA /HINDWARE/Jal/Jaguar Ist quality white shade with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and ovr flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) .as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is inclusive all types of taxes imposed by the Government.

Providing and fixing 100 mm ( one hundred millimetre) dia cromium plated grating Ist marked IS No-8934 of Jal/ESS/Jaguar of superior quality for floor, gully or nahani trap of Jal/ESS ESS as per specifications, approved drawings, design as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is inclusive all types of taxes imposed by the Government.

Providing and fixing liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws.Glass container Ist marked IS No 8934 of Jal/ESS/ jaguar as per HP.PWD, specifications, approved drawings, design as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads, lifts and other incidentals.The rate is inclusive all types of taxes imposed by the Government.

Providing and fixing charomium plated brass soap dish of Ist marked IS NO 8934 Jal/ESS /Jaguar with C.P. brass brackets fixed to wooden cleats with C.P. brass screws as per specifications, approved drawings, design as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is inclusive all types of taxes imposed by the Government.

Providing and fixing toilet paper holder C.P. brass Ist marked IS No 8934 of Jal/ ess/Jaguar including fitting complete as per specification including carriage of material within all leads , lifts, and other incidental, as per direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, Malkana toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. jet spray of approved quality and colour with 1.5 (one point five ) metre tube Ist marked IS No-8934 of Jal/ESS/Jaguar as per specification including carriage of material within all leads , lifts, and other incidental ,as per direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, Malkana toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia C.P Brass bib tap Ist marked IS No- 8934 JAL / JAQUAR / ESS with Capstan head as per specification including carriage of material within all leads , lifts and as per the direcion of the Engineer-in-Charge .The rate inclusive of octroi, royality, Malkana toll tax, sale tax, GST and any other taxes imposed by the Government.

(Providing ans fixing 15mm (fifteen millimeter) dia C.P Brass pillar tap of Ist marked IS No -8934 of JAL JAQUAR / ESS with Capstan head as per specification including carriage of material within all leads , lifts and as per the direcion of the Engineer-in-Charge .The rate inclusive of octroi, royality, Malkana toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing CP (chromium plated) brass angle valve Ist marked IS No-8934 of Jal/ESS/ Jaguar of 15mm (fifteen millimetre) without Nuts and pipe, as per specification including carriage of material within all leads , lifts and as per the direcion of the Engineer-in-Charge .The rate inclusive of octroi, royality, Malkana toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600mm x 20mm ( six hundred into twenty millimetre) C.P. brass towel rail of ISI marked IS No 8934 (eight thousand nine hundred thirty four) of Jal/ ESS/Jaguar complete with C.P.(cromium plated) brass brackets fixed to wooden plugs with C.P (chromium plated) brass screws including fitting complete as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is inclusive all types of taxes imposed by the Government.

Providing and fixing brass full way valve with wheel Ist marked IS No- 8934 of Jal/ESS / Jaguar , 15 mm dia (fifteen millimeters) diameter as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is inclusive all types of taxes imposed by the Government.

Providing and fixing brass full way valve (horizontal plunger type) heigh pressure with polythene plastic floatswith wheel Ist marked IS No- 8934 of Jal/ESS /Jaguar , 15 mm dia (fifteen millimeters) diameter as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is inclusive all types of taxes imposed by the Government.

Constructing man hole with RCC top slab 1:2:4 mix in (One cement:Two sand:Four graded stone aggregate 20mm (Twenty millimetre nominal size foundation concrete 1:4:8(One cement::Four sand:Eight graded crushed stone aggregate 40mm (forty millimetre) nominal size inside plastering 15mm(Fifteen millimetre) thick with cement mortar 1:3(One cement: Three sand) finished with a floating coat of neat cement and making channel in cement concrete 1:2:4 mix (One cement:Two sand:Four graded crushed stone aggregate 20 mm (Twenty millimetre) nominal size finished smooth complete curing and testing Inside size 1200 x 900mm and 1000mm ( one thousand into nine hundred into one thousand millimetre) deep including C.I.cover and frame (medium duty) 500mm internal diameters total weight of cover and frame to be not less than 38kg . (weight of cover 23 kg. Weight of frame 15 kg.)as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is inclusive all types of taxes imposed by the Government. With 200mm (two hundred millimetre) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand).

Constructing brick masonry chamber for under ground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (1 cement : 5 sand ) C.I. Cover with frame (lightduty ) 355mm x 610mm internal diamensions total weight of cover with frame to be not less than 38kg (weight of cover 23 kg. and weight of frame 15kg) R..C.C top slabe with 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:5:10 ( 1cement : 5 sand : 10 graded stone aggregate 40mm nominal size) inside plaster 15mm thick with cement mortar 1:3 (1 cement : 3 sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete. as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is inclusive all types of taxes imposed by the Government. Inside dimensions 455 mm x 610 mm x 450 mm ( four hundred fifty five millimetre into six hundred ten millimetre into four hundred fifty millimetre) deep single pipe line.

Providing and fixing chromium plated Ist marked IS No- 8934 of Jal/ ESS/Jaguar 40 mm (forty millimetre) dia steel pipe for Grab bar at 78 cm (seventy eight centimetre) height maters M.S. Plate as per details at the position of the seat and wash basin complete.as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads, lifts and other incidentals.The rate is inclusive all types of taxes imposed by the Government.

Providing and fixing Matrix w.c of CERA/ HINDWARE Jal/ Jaguar Ist quality white shade vitrous china wash down closet (Eurpeon type W.C. Pan) with internal P or S trap including jointing the trap with soil pipe in the cement mortar 1:1 (1 cement : 1 sand) (seat and cover to be measured and paid for separately)as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is inclusive all types of taxes imposed by the Government.

providing and fixing one H.P (Horse power) water lifting pump ( Tulu pump) of kirtoskar / crompton with necessary fitting including carrige of material with in all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer in charge. The rate is inclusive of octroi,royality,Malkana, Toll tax, sale tax, GST and other taxes imposed by the Government.

Providing and fixing 600 x120 mm ( six hundred into one hundred twenty millimetre) glass shelf of Jal/Jaguar/Cera/Hindware with CP brass brackets and guard rail complete fixed to wooden plugs with CP brass screws including carriage material within all leads , lifts and other incidental and as per the direction of the Engineer-In-Charge . The rate is inclusive of octroi, royality, Malkana toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing concealed C.P. Brass of Ist marked IS No-8934 of Jal/ESS/Jaguar/ heavy duty makes ISI marked stop cock 15 mm as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is inclusive all types of taxes imposed by the Government.

Providing and fixing 75 mm ( seventy five millimetre) diametre high pressure PVC spigot and socket waste and ventilators pipe 2.2 mm ( two point two millimetre) thick of Kitec/Supreme/Finolex/Prince ISI marked including fixing with approved adhessive etcetera complete as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads , lifts and other incidentals.The rate is inclusive all types of taxes imposed by the Government.

Course aggregate filing in Anaerobic filter (MR) Complete as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals.The rate is inclusive all types of taxes imposed by the Government.

Providing and fixing 75 mm dia (seventy five millimetre) dia high pressure PVC spigot and socket waste cowl top of ventilating pipes ISI marked including fixing with approved adhesive etcetera complete including carriage of materials within all leads and lifts and other incidentals.The rate is inclusive all types of taxes imposed by the Government.

Supplying and fixing cast iron cover without frame for man holes for frame of 500 mm (five hundred millimetre) internal dimeter CI cover (medium duty) the weight of cover to be not less than 38 Kg (thirty eight kilogram) including carriage of material upto all leads, lifts and other incidentals and as per direction of Engineer incharge.

MCC POWER PROJECTS PVT. LTD.