Transportation, installation and fabrication, commissioning and trial run including extension of one no. 1000mm width, 1x200kW,6.6 kV Single drive belt conveyor along 0XD from 30L to 41L for development of trunk panel T3 in R-VIIA seam at 3n4 inclin

Amount

Loading - unloading of belt materials on trolley etc.

Loading of 1000mm width, 1X200kW, 6.6kV Drive Head complete including base frame, drive drum, driven drum, gear, motor, equilising gear, girders etc on trolley at 3&4 incline surface with help of crane.

Loading of Discharge Unit complete including discharge drum, girders, strike plate, chute plates etc on trolley at 3&4 incline surface with help of crane.

Loading of Loop take up Unit complete including loop drum, fixed drum, loop take up trolley, winch, loop take up structure etc on trolley at 3&4 incline surface with help of crane.

Loading of Tail end Unit complete including tail end drum, base frame etc on trolley at 3&4 incline surface with help of crane.

Loading of 313.5mtr 1000mm belt structure complete including bracket, foot stools, channel, rollers etc on trolley at 3&4 incline surface manually.

Loading of 650mtr 1000mm PVC belting on trolley at 3&4 incline surface manually.

Loading of 6.6kV starter, 6.6kV VCB, Winch starter, LS unit on trolley at 3&4 incline surface with help of crane.

Loading of 150mtr. 6.6kV 35sqmm cable on trolley at 3&4 incline surface manually.

Loading of 100mtr. Sequence cable, 310mtr. Pull cord cable, 310mtr. Communication cable & signalling system for 310mtr on trolley at 3&4 incline surface manually.

Unloading of 1000mm width, 1X200kW, 6.6kV Drive Head complete including base frame, drive drum, driven drum, gear, motor, equilising gear, girders etc from trolley at 3XD/31L(R- VIIA) and approx. 100mtr. manual transport to belt installation site.

Unloading of Discharge Unit complete including discharge drum, girders, strike plate, chute plates etc from trolley at 3XD/31L(R-VIIA) and approx. 100mtr. manual transport to belt installation site.

Unloading of Loop take up Unit complete including loop drum, fixed drum, loop take up trolley, winch, loop take up structure etc from trolley at 3XD/31L(R-VIIA) and approx. 100mtr., manual transport to belt installation site.

Unloading of Tail end Unit complete including tail end drum, base frame etc from trolley at 3XD/31L(R-VIIA) and approx. 100mtr. manual transport to belt installation site.

Unloading of 313.5mtr 1000mm belt structure complete including bracket, foot stools, channel, rollers etc from trolley at 3XD/31L(R-VIIA) and approx. 100mtr. manual transport to belt installation site.

Unloading of 650mtr 1000mm PVC belting from trolley at 3XD/31L(R-VIIA) and approx. 100mtr. manual transport to belt installation site.

Unloading of 6.6kV starter, 6.6kV VCB, Winch starter, LS unit from trolley at 3XD/31L(R- VIIA) and approx. 100mtr. manual transport to belt installation site.

Unloading of 150mtr. 6.6kV 35sqmm cable from trolley at 3XD/31L(R-VIIA) and approx. 100mtr. manual transport to belt installation site.

Unloading of 100mtr. Sequence cable, 310mtr. Pull cord cable, 310mtr. Communication cable & signalling system for 310mtr from trolley at 3XD/31L(R-VIIA) and approx. 100mtr. manual transport to belt installation site.

Installation, necessary fabrication & trial run of one 1000mm width, 1x200kW, 6.6 kv belt conveyor for a length of 85.5 mtr from 30L/0XD to 33L/0XD in RVIIA seam

Installation of 1000mm width, 1X200kW, 6.6kV Drive Head complete at 31L/0XD in R-VIIA

Installation of Discharge Unit complete at 30L/OXD(R-VIIA)

Installation of Loop take up Unit complete at (31L-32L)/0XD(R-VIIA).

Installation of Tail End Unit complete at 331/0XD(R-VIIA).

Installation of 85.5mtr. 1000mm belt conveyor structure complete from 30L/0XD to 331/0XD(R VIIA).

Laying-lapping-jointing-tensioning of 194mtr. 1000mm wide PVC belting from 30L/0XD to 331/0XD(R-VIIA).

Placing of breaker, belt starter, winch starter & LS unit at 31L/OXD(R-VIIA) civil platform.

Laying-hanging 150mtr 6.6kV grade cable from 32L/(2XD-3XD) VCB to 31L/0XD VCB manually.

Laying-hanging-placing-fitting of 100mtr. sequence cable from 30L/1XD starter to 31L/OXD starter in R-VIIA seam.

Laying-hanging-placing-fitting of pull cords with its 82mtr. cable, belt communication devices with its 82mtr. cable, 82mtr. signalling system (8-SWG GI wire, bobbin insulators & 3/8" X 3" MS Bolt-nut) from 30L/0XD to 33L/0XD in R-VIIA seam.

Testing, trial run, rectification of alignment, tuning of this proposed OXDip belt conveyor from 30L/0XD to 33L/0XD in R-VIIA seam

Eight times extension of the proposed 0XD belt conveyor from 33L/0XD to 41L/0XD for a length of 228 mtr. in R- VIIA seam of 3&4 Incline Unit, JPC.

Eight times dismantling of tail end unit complete for eight times belt extension of proposed OXD belt.

Eight times transportation and installation of tail end unit complete for eight times belt extension of proposed OXD belt from 34L/0XD (R-VIIA) to 41L/0XD (R-VIIA).

Installation of 228mtr. 1000mm belt conveyor structure complete from 33L/0XD to 411/0XD(R- VIIA). during eight times belt extension. * Each time belt extension will be for 28.5mtr.

Laying, Lapping, Jointing & Tensioning of 456mtr. 1000mm belting from 33L/0XD to 41L/OXD in R-VIIA seam during eight times belt extension and trial run.

Laying-hanging-placing-fitting of pull cords with its 228mtr. cable, belt communication devices with its 228mtr. cable, 228mtr. signalling system (8-SWG GI wire, bobbin insulators & 3/8" X 3" MS Bolt-nut) from 33L/0XD to 41L/0XD in R-VIIA seam during eight times belt extension * Each time belt extension will and trial run.

Civil foundation works for installation of 1X90kW, 550V, 1000mm wide belt conveyer drive head, discharge unit, loop take-up unit and platform for ACB, Starter for 82L belt conveyor of 3&4 incline, JPC.

Recess cutting in stone

Cleaning of debris/Muck

Sand filling

Brickwork with flyash bricks in foundation & plinth in cement mortar 1:6

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level :1:2:4 ( 1 cement : 2 coarse sand (zone III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Brickwork with flyash bricks in foundation & plinth in cement mortar 1:6

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources)

12 mm cement plaster of mix 1:6

Loading material into tub and loading at site

Roof heightening by drilling blasting in stone, cleaning, roof bolting including cost of drill rod, drill bit for installation of proposed 82L belt conveyor in R-VII seam of 3&4 incline under JPC.

Roof heightening by drilling blasting in stone including dressing, cleaning with cost of drill rod and drill bit.(Excluding cost of explosive & detonator)

Roof bolting including carrying of materials from surface to UG side, drilling, grouting & cost of drill rod and drill bit

Supply of materials

Supply of DA Cylinder

Supply of Oxygen Cylinder

Supply of turn buckle

Total impact of GST for the purpose of CTC

N.K. ENTERPRISE

K R ENTERPRISE