Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹9.2 L
EMD Value
₹18,315
Closing Date
25 Nov 2026, 1:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE/ MBD
Tinbatti More, Siliguri
Repair and Maintenance of Recreation Club building at Teesta Pally under Mahananda Barrage Division, Tinbatti More, Siliguri.
2026_IWD_5083048_23
WBIW/EE/MBD/NIT No- 02(e)/ 2026-27
Open Tender
CIVIL WORKS
Percentage
90 days
Tinbatti, Siliguri
Please refer Tender documents.
6 documents required · 6 mandatory
₹18,315
Yes
6 Nov 2026
6 Nov 2026
26 Nov 2026
6 Nov 2026
25 Nov 2026
6 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling artificial stone flooring up to 50 mm thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m
a) In ground floor including roof. | 400.97 | Sqm | 59.59 | ₹23,893.8 |
| 2 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.
(b) River bazree | 20.05 | Cum | 4,552.73 | ₹91,282.24 |
| 3 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic
adhesive & grout materials etc.
(A) Floor
With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.
(b) Area of each tile above 0.09 Sq.m
(i) Coloured decorative | 417.01 | Sqm | 1,068.12 | ₹4,45,416.72 |
| 4 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic
adhesive & grout materials etc.
(B) Wall
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.
(b) Area of each tile above 0.09 Sq.m
(i) Coloured decorative | 8.46 | Sqm | 1,300.52 | ₹11,002.4 |
| 5 | Stripping off worn out plaster and racking out joints od walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75 m as directed. | 584.1 | Sqm | 22.64 | ₹13,224.02 |
| 6 | Plaster (to wall, floor, ceiling etc) with sand and cement morter including rounding off or chanfering corners as directed and racking out joints, including throating, nosing and drip course, scaffolding/staging where necessary (Ground Floor). (Excluding cost of chipping over concrete surface).
ii) With 1:4 cement morter.b) 15 mm thick plaster. | 187.58 | Sqm | 182.48 | ₹34,229.6 |
| 6.1 | c) 10 mm thick plaster. | 396.53 | Sqm | 147.14 | ₹58,345.42 |
| 7 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)
(a) One Coat
i) Water based interior grade Acrylic Primer | 421.87 | %Sqm | 3,670.74 | ₹15,48,575.08 |
| 8 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)
i) Standard Quality | 421.87 | Sqm | 73.89 | ₹31,171.97 |
| 9 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
(a) On timber or plastered surface :
With other than hi-gloss of approved quality-
(iii) One coat (with any shade except white) | 94.01 | Sqm | 57.21 | ₹5,378.31 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 8.07 MB
Tendernotice_2.pdf
PDF • 0.74 MB
Tendernotice_3.pdf
PDF • 0.04 MB
BOQ_5200743.xls
BOQ • 0.37 MB
23.pdf
Additional Documents • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .