Repair/ Renovation of the civil/ electrical infrastructure of the office building of Executive Engineer TLMD-I at Bemina which got damaged in the Fire incident

Amount

Repair/Renovation of Civil Infrastructure of the office building of TLMD-I

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50meters lead: Of sectional area 40 sqcm. and above.

Dismantling roofing including ridges, hips valleys and gutters etc. and stacking the material within 50 meters lead of: G.S. Sheet

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Kiln seasoned and chemically treated hollock wood

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level: Hot rolled deformed bars

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately): Kiln seasoned & chemically treated hollock wood 35mm

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Kiln seasoned & chemically treated hollock wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Kiln seasoned and chemically treated hollock wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia.0.63 mm for doors, windows and clerestory windows with ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge. Kiln seasoned and chemically treated hollock wood ,35mm.

Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 150x10 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100mm

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting wood/steel work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete (POPLAR WOOD)

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required: 0.50mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.25 mm thick with zinc coating not less than 350 gram/m2

Providing and fixing plained eaves boarding.G.I 250x32 mm (nominal size)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, inskirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete.

Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately): 8 mm thick fully perforated Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/cm2, bending strength 100 kg/cm2, of size 595x595 mm, having perforation of dia. 10mm with minimum perforated area 18% with non-woven tissue on the back side, having an NRC (Noise Reduction Certificate) of 0.85, with 50mm thick rock wool of 48 kg/cum backing.

Providing and fixing wooden polished panelling on walls of approved brand and manufacture over a wooden plyboard of 12 mm thickness all fixtures included as per directions of Engineer in charge

Wooden planking, tongued and grooved in flooring including fixing with iron screws complete:12 mm thick: Second class teak wood

Providing and fixing ply wood frame work for wardrobe with mica shutters, hings, handles locks etc including all complete job. As per the directions of engineer incharge

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Granite of any colour or shade

Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank of 1000 liter capacity

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 25mm OD (SDR-7.4)

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing 15 mm nominal bore C.P.brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore

Earth work in excavation over area (exceeding 30 cm depth 1.5 m in width as well as 10 SM on plan) including disposal of excavated earth and lift upto 1.5m disposed earth to be leveled and neatly dressed.

Carriage of materials from different sites

Cement steel and CGI

Sand from local nallaha at an

Stone aggregates from local crusher at an average lead of 10 Km

Bricks from Budgam srinagar at an average of lead of 10 km

Stones from local quarry at an average lead of 10 km

Electrical component Part-II >>The switch/socket (contractor supplied) shall be modular type of make as specified in list of approved make with metallic modular boxes shall be installed for executed as per drawing, specification to ensure good aesthetics, line & level. >>All materials like wire, conduit, switches, switchboard shall be supplied by contractor as per approved make. Above specification governs all work specified in items. >>The Wires/Conductor must be of FRLS type of Polycab, RR Kables, Finolex, Primecab make . >>Sockets and Switches: Legrand, L&T, Wipro, North West, Honeywell, Crabtree. >>MCB, Isolator, RCCB, RCBO, MCB-DB: Legrand /Schnider /L&T /ABB /eaton /Hager. >>LED lamp: Philips, Bajaj, Crompton, Wipro, osram, SYSKA >>Electric Ceiling fans: Almonard, Crompton, Bajaj, Usha, Orient. >>PVC conduict: BEC, Modi, Shrinath, Kent, Precision, Polycab

Wiring for light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (executed = 109)

Wiring for exhaust fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

Wiring for ceiling fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for 3 pin 15/20 A socket with switch outlet with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supply and fixing of 5/6 Modular Switch

Supply and fixing of 3 pin 5/6 A socket outlet

Supply and fixing of 8- Way TPN , Double door(Lighting/Power Distribution Board-LDB/PDB) along with connection with main board.

Supplying and fixing 5A to 32 A (6/10A ) rating, 240V 10 kA, “C” curve, Single pole miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.:-(6/10A MCB )rating, for Outgoing ckt from LDB's/PDB's to Switch Board wired on 2.5 mm2 conductor

Supply and laying /Fixing of one no PVC insulated and PVC sheathed /XPLE power cable of 1.1 kV grade direct by way of anchoring ,hooks, 3Core X35 Sqmm2 Armoured XLPE Aluminum cable. From Control room to divisional office (Complete job)

Supply , delivery ad fixing of slim 20- 24-Watt LED Batten t (T-5 series),6500K,2400-2500 Lumens, average life of 50 hours along with accsessory assembly or equivelent slim of complete in all respects.(cool white).

Supply and fixing of Modular PVC batten/angle holder including connections ec. as required

Supply and fixing in position LED lamp of approved make: 12W, 250Volt.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but including modular plate etc. as required complete in all respects.(for ceiling fans points)

Supplying, erecting and testing of approved make Exhaust Fan of 300 mm(12 Inches) 900 rpm with mounting frame, blades AC 230-250 complete connection and including, frame bolt/ Anchor hole fastners etc. complete finished of approved as required. (P/F=7 No.)

Supply and fitting (with modifications whereever needed) Testing and Commissioning of energy efficient flood light with high power LED of 100-120W assembled on single MCPCB, system lumens output with luminous efficacy>100 lm/W. Luminiare having color temp 6500K & 50000 burning hrs life with minimum @ L70(rated lumen maintenance life of 70% at 50,000 hours). The colour rendering index of LED light should be more than 80. Luminiare comprises of driver, PF= 0.95 & surge protection 3KV. Housing must be made of pressure die cast aluminium and with heat resistant flat glass, should have IP65 protection(Feature of IP 65 :Dust proof and water proof protection). The total light output from Luminarie must be about between 10500-12000 Lumens). IP-20 Note:IEC Compliant for Safety, Performance & EMI Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory. including connection wire, testing etc. to complete the job in all respects . Each Lumanrie should be having 1 year Guarantee certificate from manufacturer. (Outer walls of Divisional office)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required: 4 Module

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required: 6 Module

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required: 12 Module

Supplying and fixing modular Indicator on the existing modular plate & switch box including connections shall be fixed on the Modular place for used fixing light switches on the same lighting switch board).

Supplying and fixing of Ceiling rose of for lighting points

Supplying and fixing modular Demo/Blanking Point switches on the existing modular plate & switch box including connections including modular plate etc. (The demo outlet shall be fixed on the Modular place for used fixing light switches on the same lighting switch board).

Supply and Fixing of 15 Watt LED Surface lights of standard make on cealing

Supplying and Laying of 1.1 KV voltage grade PVC insulated FRLSH 16 sq. mm standard flexible copper conductor wire with the following sizes of FRLS PVC insulated copper conductor, recessed medium class PVC conduit as requiredas per specifications in ductworks,trenches,cable including 40mm dia PVC conduits from Sub-Distribution boards to Main Board

Supplying and Laying of 1.1 KV voltage grade PVC insulated FRLSH 6 sq. mm standard flexible copper conductor wire with the following sizes of FRLS PVC insulated copper conductor, recessed medium class PVC conduit as requiredas per specifications in ductworks,trenches,cable including 40mm dia PVC conduits from Sub-Distribution boards to Main Boardm.

Providing & fixing of Iron Hooks for ceiling Fans

Providing earthing stations at locations as called for Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

M/S AIJAZ AHMED MIR (BID ID -2634168)

M/S MUSHTAQ AHMAD KHAN (BID ID -2635159)