REPAIR RENEWAL MAINTENANCE OF EXTERNAL ELECTRIC CABLES, LT PANELS, STREET LIGHT , GARDEN LIGHTS, POST TOP LANTERN, DECORATIVE POLES , DG SETS AT VIKHROLI AND GHATKOPAR AREA UNDER GE (N) MUMBAI

Amount

Excavation in trenches, not exceeding 1.50 m wide and not exceeding 1.5 m in depth, for foundation, laying of cable etc, not exceeding 10 sqm on plan and getting out in hard/dense soil complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

Supply and lay double wall corrugated (DWC) HDPE pipe 63mm outer dia , as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N/ Rex Polyextrusion Ltd/ Finolex/ Prince Pipes and fittings ltd/Kisan/Supreme/JAIN IRRIGATION SYS/ Astral

Supply and lay double wall corrugated (DWC) HDPE pipe 40mm outer dia , as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N/ Rex Polyextrusion Ltd/ Finolex/ Prince Pipes and fittings ltd/Kisan/Supreme/JAIN IRRIGATION SYS/ Astral

Supplying, laying,connecting, testing & commissioning LT UG XLPE insulated, heavy duty, 1100 V grade electric cable with aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 50 Sqmm x 3.5 core, laid in trenches or passing through pipe, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge of following sizes:- Note : Earthwork excavation, DWC pipe for cable protection shall be measured and paid separately in their respective items Make: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI)

-do- same as Item no. 6 above but of size 95 Sqmm 3.5 Core

-do- same as Item no. 6 above but of size 70 Sqmm 3.5 Core

-do- same as Item no. 6 above but of size 185 Sqmm 3.5 Core

-do- same as Item no. 6 above but of size 10 Sqmm 4 Core

-do- same as Item no. 6 above but of size 16 Sqmm 4 Core

Material and labour in replacement for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron or steel earth lead wire 4 mm dia size by mean of nut/bolt and washer of galvanized iron or steel as shown in electrical plate no 3 of SSR part I 2009 including necessary excavation and earth work GI pipe 20mm dia medium grade ISI marked for watering and GI 15mm dia medium grade ISI marked pipe for protection of GI earth wire etc, PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to DB as indicated including testing complete.

Material and labour for earthing earthing with GI plate 600mmx600mmx6mm thick, burried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level, connecting to GI plate with 32x6 mm GI earth strip upto 7.5 Mtr long from earth point to test point by means of bolts, nuts, check nuts, washers and provision of charcoal, salt etc including watering arrangement with 15 mm dia GI medium grade pipe, and 40mm dia GI pipe for protection of GI strip ,MS funnel, PCC chamber in cement concrete 1:3:6 type C1 and finished even and smooth without using extra cement, 50 mm thick RCC cover 1:2:4 type B1 including 10 mm dia deformed bars @100 mm c/c on both ways for full size of chamber complete all as per electrical plate No 3 including necessary excavation and earth work in any type of soil complete all as directed.

Supply and fix GI strip 32mmX6 mm buried in ground/on wall, extension of existing earthing lead complete all as per specified and directed by Engineer - in - charge.

Material and labour for cutting or cutting the existing Bitumen Road /hard standing to size not exceeding 45cm wide and depth not less than 45cm for passing of UG cable through GI pipe and making good the disturbed surface filled with excavated material and top 200mm depth with plain cement concrete 1:3:6 type C1 using 20mm graded aggregate complete all as specified and directed.

Supply and fix galvanised iron pipe, medium grade, 80mm bore for cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle, wherever necessary complete all as specified and as directed by Engineer-in-Charge. Make: TATA/SWASTIK/JINDAL/Bharat Steel tube/ZENITH/Indian Tube Company

Supply and fix galvanised iron pipe, medium grade, 50mm bore for cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle, wherever necessary complete all as specified and as directed by Engineer-in-Charge. Make: TATA/SWASTIK/JINDAL/Bharat Steel tube/ZENITH/Indian Tube Company

Supplying, installing, testing and commissioning of suitable size factory made out door type, dust and vermin proof, LT feeder pillar box double door, cubical and compartmentalized type, 415 volts, AC, 50 Hz, fabricated with 3.15mm thick CRCA sheet for outer side and 2mm thick inside complete with and including mounted on angle iron frame stand of size 50 x 50 x 6 mm thick 50 cm long leg, grouted in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate), spray painted inside and outside, powder coated of approved colour by Engineer-in-Charge, enclosed bus bar chamber with aluminium bus bar (04 Nos of rating capacity 300 Amps), mounted on PVC insulators, electric connection complete with from MCCB to main bus bar, cable glands, thimble complete with and including openable shutters butt hinged, locking arrangement including PCC work, excavation & earth work, taking down old rusted feeder pillar box complete and comprising supply and fix for following etc complete all as specified and as directed by Engineer-in-Charge:-

INCOMING: (a) MCCB 4 pole, 250 Amps, 415 volts, 50 Hz, 36 KA, adjustable thermal & adjustable magnetic settings - 01 No. BUSBAR : (a) Bus bar chamber with 300 Amps aluminium strip with heat shrinkable insulating sleeve size 50 x 10mm - 4Nos of required length supported on FRP insulators, internal wiring for indicators with 2.5 Sqmm copper cable single core. (b) CT coil of ratio 200/5 Amps - 03 Nos (c) Digital type Multifunction meter of class I - 1 Nos Make : L & T Model : 4400 LED series or equivalent in Siemens/ Scneider d) LED type indicator lamps RYB - 01 Set OUTGOING: (a) MCCB 4 pole, 100 Amps, 415 volts, 50 Hz, 16 KA, adjustable thermal & adjustable magnetic settings - 06 Nos (b) MCB 4 pole 32 Amp, 415 volt, 36KA, 50 Hz, adjustable thermal and adjustable magnetic settings - 01 Nos. (spare). Note: (i) Contactor shall be submit the drawings of panels for approval before fabrication in factory. (ii) LT panel board shall be CPRI approved.

Supply, InstalI, commissioning and testing of Starter Panel, modular construction with seperrate comartment for each starter motor, Main Incoming, Indicator & metering module of suitable size, factory made from CPRI approved manufacturer, indoor, cubical compartmental type with openable door in each compartment and back side openable door with hinged doors & locking arrangement, made out of 2 mm thick mild steel CRCA sheet, supported and fixed on pedastral type, including earthing stud, labeling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enameled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. all complete as specified and directed.

BUSBAR CHAMBER : Copper bus bar of 40mm x 6mm size for each phase & neutral with , 415 V AC, 3 Phase and full size Neutral (Throughout the length) bus bars with colour coded heat shrink sleeves supported on SMC type grip supports, 36 KA braking capacity (i) Incoming MCCB 4 Pole 63 Amps, 25 KA capacity, 50 Hz, adjustable thermal and adjustable magnetic settings - 01 Nos. (II) onload front operated CHANGE OVER SWITCH 100 Amps front operated -1 Nos (iii) MCCB 3 pole 40 amps, 16 KA - 3 Nos (One for each motor & one spare) (iv) Star Delta Starter for open execution with and complete wiring for 10HP motor -03 Nos (One for each motor & one spare). (v) Electronic motor protection relay MPR200nX, 240V AC, thermal overload range 16-44Amps for 10HP motors - 03 Nos. (v) LED indicating lamp - set of three (vi) MCB TPN 16 A for pump house lighting and fan load. (v) 3 Ph 4 wire Digital type Multifunction meter of class I -4 Nos Make : L & T Model : 4400 LED series or equivalent in Siemens/ Scneider. (vi) LED Indicating Lamps for power, ON & OFF for each starter with necessary NO/NC relay, start, stop and trip Push buttons - for 03 Motors vii) Control wiring from pressure switch to star delta starter for auto operation of pump. .

Supplying, installing, testing and commissioning of suitable size factory made Indoor type, dust and vermin proof, LT feeder pillar box double door, cubical and compartmentalized type, 415 volts, AC, 50 Hz, fabricated with 1.6 mm thick CRCA sheet for outer side and 2mm thick inside complete with and including mounted on angle iron frame stand of size 50 x 50 x 6 mm thick 50 cm long leg, grouted in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate), spray painted inside and outside, powder coated of approved colour by Engineer-in-Charge, enclosed bus bar chamber with aluminium bus bar for phases and neutral (04 Nos of rating capacity 300 Amps), mounted on PVC insulators, electric connection complete with from MCCB to main bus bar, cable glands, thimble complete with and including openable shutters butt hinged, locking arrangement including PCC work, excavation & earth work, taking down old rusted feeder pillar box complete and comprising supply and fix for following etc complete all as specified and as directed by Engineer-in-Charge:-

INCOMING:(a) MCCB 4 pole, 250 Amps, 415 volts, 50 Hz, 36 KA, adjustable thermal & adjustable magnetic settings - 01 No. BUSBAR :- (b) Bus bar chamber with 300 Amps aluminium strip with heat shrinkable insulating sleeve size- 4Nos of required length supported on FRP insulators, internal wiring for indicators with 2.5 Sqmm copper cable single core. (b) Digital type Multifunction meter of class I -4 Nos Make : L & T Model : 4400 LED series or equivalent in Siemens/ Scneider (c) CT coil of ratio 400/5 Amps - 03 Nos (d) LED type indicator lamps RYB - 01 Set OUTGOING: (a) MCCB 4 pole, 100 Amps, 415 volts, 50 Hz, 16 KA, adjustable thermal & adjustable magnetic settings - 04 Nos. (b) (b) MCB 4 pole 32 Amp, 415 volt, 36KA, 50 Hz, adjustable thermal and adjustable magnetic settings - 01 Nos. (c) Timer switch 4 Pole 415 Volts with ML-2 Contactor-01 Nos Note: (i) Contactor shall be submit the drawings of panels for approval before fabrication in factory.(ii) LT panel board shall be CPRI approved.

Make for Item No. 18 to 20- Make of MCCB/MCB: L&T/ Scheneider/ Siemens Make of bus bar chamber/CT Coil : L &T/Havells/Siemens/ ABB/ Crompton Greaves Make of indicator lamp- Larsen &Toubro/ Siemens/ ABB/ Schneider/ Japuria/ EPCOS

Material and labour for Acrylic Lasercut Name Plate/chart/ poster/ diagram etc made out of perpex sheet 3 mm thick, cut to size 90 cm x 60cm colour background and diagram and letters including fixing arrangement with screws / adhesives as required complete all as specified and directed by Engineer in charge. Note-The board should indicate the layout of electric supply in the station along with Transformer capacity, location of LT panel/ feederpillars, incoming MCCB capacity, cable route, Cable sizes (different colour as per sizes ) and building locations, etc complete all as specified and directed.

Material and labour for undusting & cleaning of feeder pillars & LT panel with dry, lint-free cloth or a soft brush to eliminate dust, dirt, and debris from the panel's surface externally & internally comaprtment wise along with replacing of any unservceable MCCB/ Lugs/ Cables, refixing loose wires/ cables, redistrbution of load for balanced distribution, painting corroded areas, including cleaning of vegatation/plants around Feeder pillars and writing respective Fedder pillar Numbers,complete all as specified and directed by engineer Incharge. Note : MCCB/ Timer/ Cables will be paid and measured seperately.

Supply & Fix in repair DB vertical type 4 way TPN in repair, double door load line powder coated complete alongwith 200 Amp rated Bus bar fixed on wall duly grouted in solid block wall or on wooden board,including MCB TPN 100 Amps incoming and 12 Nos of MCB SP of 40 Amp outgoing with lugs/thimbles duly crimped for connection with all necessary fixing arrangement complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB. Make : Havells / Legrand / Schneider / MDS sample as approved by GE.

Supply & Fix in repair MCCB 4 Pole, 415 V, thermal & magnetic adjustable type, 250 Amps with breaking capacity 36 KA with extended copper terminals including all connections & testing complete all as specified and directed by Engineer In charge Make : L&T/ Scheneider/ Siemens

Supply & Fix in repair MCCB 4 Pole, 415 V, thermal & magnetic adjustable type, 63 to 100 Amps with breaking capacity 16 KA with extended copper terminals including all connections & testing complete all as specified and directed by Engineer In charge Make : L&T/ Scheneider/ Siemens

Supply & Fix in repair MCCB 4 Pole, 415 V, thermal & magnetic adjustable type, 100 Amps with breaking capacity 16 KA with extended copper terminals including all connections & testing complete all as specified and directed by Engineer In charge Make : L&T/ Scheneider/ Siemens

Supply and fix in repairs of Ammeter, digital type, 0-300 Amps, AC CT operated, suitable for three phase all as directed. Make: AE/ Schneider/ L&T

Supply and fix in repairs of voltmeter, 0 to 500 Volts, AC, suitable for three phase, digital type all as directed. Make: AE/Schneider/L&T

Supply and fix outdoor 1.1 KV LT XLPE cable Heat Shrink staright through jointing kit of cable size 120- 185 Sqmm including cable finding cable fault complete all as specified and as directed by Engineer-In-Charge. Make: Densons/ M Seal/ Raychem/ Siemens / Birla 3M/ Mahindra & Mahindra

Supply & Fix in repairs micro controller based APFC control relay/ Reactive power manager to connect minimum 12 capacitor banks for automatic control of capacitor banks in 3 Phase 4 wire, 50 HZ supply LT Panel with target PF setting, LED operational indicators, Parameter display ( PF, KVAR, Capacitor bank values, CT ratio etc) and alarm signal for CT polarity reversal, Over Voltage etc complete with all necessary fixing arrangements complete all as specified and directed. Make : L & T Model : RPM-14 Cap pat No : MRPM1400000 or equivalent in Scheinder/ Siemens

Supply & Fix in repairs 3 phase, 50 HZ VAF meter class -I to measure and display voltage, current, Frequency & Power factor with Class I Accuracy complete with all necessary fixing arrangements complete all as specified and directed. Make : L & T Model : RPM-14 Cap pat No : MRPM1400000 or equivalent in Scheinder/ Siemens

Supply & Fix in repairs SMC/ FRP Cable Junction box side hinged type with inside dimensions 240x130x95 mm in size, with pole mounting arrangement for outdoor installation suitable for 3 Phase 4 core wire incoming including 6 Amp SP MCB complete all as directed and specified by Engineer In Charge. Make: Sintex Model : GSJB- 2817 or equivalent model in Hensel/ National

Supply & Fix in repair, three core, PVC insulated and unsheathed, unarmoured, 1100 Volt grade cable, 1.5 sqmm with stranded copper conductor cable, drawn through 20 mm dia PVC conduit, medium grade with necessary fixing arrangement from looping box to security light fitting complete all as specified and as directed by Engr-in-Charge. Make: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI)

Supply and fix in repairs LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engr-in-Charge. Make : Philips Model No. BRP410 or equivalent in Havells/Bajaj

Supply and fix in repairs LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. complete all as specified and as directed by Engr-in-Charge. Make : Philips CatPat No. BVP141 LED70 CW FG GR PSU or equivalent in Havells/Bajaj

Supply & Fix in repair post top lantern LED type 35/40 watt 230 watt volts AC outdoor type with decorative post top, IP 65 protection with impact and corrosion resistant complete with driver and lamp including necessary fixing arrangements such as GI Pipe, PCC complete all as specified and as directed by Engr-in-Charge. Make : Philips Cat Pat No : BGP300 LED40 757 PSU PC IN S1 or equivalent in Havells/Bajaj.

Supply and fix in repairs LED Bollard light Fitting 9/10 watts aluminium landscape luminaire for diffused lighting, IP65 protected, electrically connecting up with cable, including necessary earth work and form work, cement concrete in coping of poles, fair finishing to exposed faces of concrete etc,complete all as specified and as directed by Engr-in-Charge. Make : Crompton Model : SYrus Cat Pat No : LBLSR-10-CDL,Havells Cat pat No : TURINBLS10WLED830PSYMTOPC Philips Cat Pat No : BCP400 LED09 D CW PSU GR S1

Supply & Fix Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified ,type 410 SP-31 (9.00 metres long) along with brackets for fixing LED street light including dismantling and taking down existing damaged/broken PCC Pole Complete all as specified and directed by engineer In Charge. Note : Necessary PCC concrete and earth work will be measured and paid seperately. Make: India Tube and Co / India Electric Poles Mfg Co,Maharashtra / Bombay Tubes / Kalinga Tubes / Singh Profile, Pune

Material and labour for Plain Cement Concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation / mass concrete/filling complete all as specified and as directed by the Engineer-in-charge

Material and labour for Plain Cement Concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, footing, bases of columns, raft and raft beams, plinth beams, mass concrete and similar work etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Plain Cement Concrete 1:2:4 type B1 using 20mm graded stone aggregate as in foundation / mass concrete/coping including necessary formwork for fair finished surfaces etc complete all as specified and as directed by the Engineer-in-charge

Supply & Fix in repairs digital timer programmable switch, 230 Volt with single phase rating including necessary connecting cables complete all as specified and as directed by Engr-in-Charge. Make : L&T/ Schneider/ Seimens

Supply & Fix in repairs ML-2 Contactor, 3 pole, 50 HZ for street lightning along with necessary fixing arrangements complete all as specified and as directed by Engr-in-Charge. Make : L&T/ Schneider/ Seimens

Supply and fix IP 65 Weather Proof / Water Proof Rating outdoor usuage decorative Tricolour LED Strip with Amber, White and Green with necessary fixing arrangement to be fitted on Street Lights Poles/ war trophy complete all as specified and directed by engineer In Charge Make : Philips/ Osram Ledvance/ Havells

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 63,745.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

SHREE SIDDHIVINAYAK ENGINEERS

joshua construction

AIRDOT ENGINEERING

Radha Engineering Services

ELECTRO ASSOCIATES