RM/PBDN/CIVIL/NIT/2025-26/12 Dt.04.11.25

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. In Fifth Floor

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. upto 150 mm thick. In Fifth Floor

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m including stacking of steel bars. In Fifth Floor

Cutting chase upto 125x150mm. And subsequent mending of damages. In brick wall [Cement-3.6 Kg/Mtr]

Cutting chase upto 125x150mm. And subsequent mending of damages. In concrete wall [Cement-3.6 Kg/Mtr]

Labour for Chipping of concrete surface before taking up Plastering work

Cleaning the concrete surface by removing dirt and debris,marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed,cutting the concrete to regular shape,wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Brick work with 1st class bricks in cement mortar (1:6). In superstructure, fifth floor

200mm. Thick Brickwork with FlyAsh Bricks set in cements and mortar (1:6) including raking out joints, curing, scaffolding etc. complete in all respect. In Fifth Floor

75mm. Thick brick work with 1st class bricks set in cement, sandmortar (1:3) in ground floor including H.B. netting in every alternate layers.

125 mm thick brick work with 1st class bricks in cement mortar (1:4) .In fifth floor

Ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. Pakur variety. In Fifth Floor

Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, as per relevant IS codes. Pakur variety. In Fifth Floor

Screed concrete on roof with cement concrete (1:2:4) including admixture of damp proof materials as per manufacturers specification laid in panels as directed including cleaning, chipping and applying cement sluury @ 1.75 Kg/SqM. Providing ghoondies at junctions with parapet etc. Shaping and finishing at mouths of rainwater pipes complete with top finishing with cement punning not more than 1.5mm thick , curing complete as per direction of Engineer-in-charge. (Same as Artificial Stone floor - Neat cement punning) Average 35 mm thick. Fifth Floor

Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stoutprops and thickhard woodplanks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work upto roof of Fifth Floor

Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stoutprops and thickhard woodplanks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works. 25 mm to 30 mm shuttering without staging in foundation

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation, basement and upto roof of Fifth Floor. Tor steel.SAIL/TATA/RINL

Extra rate for using water proofing and plasticising admixture @0.2% by weight of cement (or atmanufacturer's specified rate) for concrete of various grades.

Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after applicat ion slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and remo val of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manu facturer's specification and direction of Engineer-in Char ge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). In Fifth Floor: Sizes-600 mm x600mm x10 mm with breaking strength >1500 N

Supplying, fitting & fixing best quality digital printed Ceramic tiles in coloured decorative on walls and floors to match with the existing work &4 nos. key stones (10mm) fixed with adhesive 4.5mm thick at the back of each tile&finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface,if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy groutpointing including spacer-2mm(When tiles are laid over existing hard ready surface)all complete as per direction of Engineer-in-charge

Supplying, fitting & fixing granite tiles 10mmto12mm. thick in columns,wall, facia etc.with 15thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass/copper hooks including pointing in cement mortar (1:2) (1white cement : 2marbledust)with admixture of pigment matching the stone shades allcomplete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. [Usingcement slurryat back sideof [email protected]/sq.m& white cement slurry for joint filling @ 1.8 kg/sq.m]

Supplying, fitting and fixing Marble Slab/tile of 15 to 18mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm(av.) thck base of Cement mortar (1:2) laid with white cement slurry @4.4kg/Sq.m before placing marble & jointed with white cement [email protected] kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering-in-Charge in Ground Floor.{White cement and Pigment to be supplied by the Agency. With Chawk Dungri. Area of each tile exceeding 0.3sq.m. but not exceeding 0.6 sq.m.

Supplying Luppra capsule wall mounting mirror with Light of dimension 450mm X 600 mm. (Market Price)

Supplying, fitting & fixing polycarbonate sheet of approved make & brand conforming to IS: 14443-1997 and having 50 micron UV protection layer under co-extrusion technology, Fire rating being B-s1 as per EN13501-1 certification, fitted and fixed with 60mm wide aluminium channel section top and bottom member in dry-glaze sandwitch system, (unit wt. of top and bottom members: 0.375 kg/m & 0.69 kg/m) of approved brand and profile, EPDM quality rubber gaskets, anti dust tape, end closer "C" channel and 75 mm long Self tapping screw being drilled through the centre leg of the bottom section with nuts placed at 300 mm apart without anyway puncturing the polycarbonate sheet, EPDM Washer 16 mm dia & 3 mm thick washer etc complete strictly as per manufacturers specification and direction of Engineer-inCharge. (Payment to be made on area of finished work) . In Roof:- Natural/ Blue/Green/ Bronze /Opal/Metallic grey colour. With 2 wall 10 mm overall thickness (wt.1.70kg/sqm,Ugvalue being 3.1 W/m2K, Min. cold bending radius of 1200 mm).)With 2 wall 10 mm overall thickness (wt.1.70kg/sqm,Ugvalue being 3.1 W/m2K, Min. cold bending radius of 1200 mm)

Supplying, fitting and fixing glass reinforced polyester translucent fiber glass sheet to match with GCI Corrugation as per IS: 12866 - 1989 in roof fitted and fixed with 10 mm dia "J" or "L" hook, bolts and nuts, limpet and bitumen washers and putty with 150mm end lap and one corrugation minimum side lap complete. 1.6mm +/- 0.2 mm thick sheet.(2.6Kg/Sq.m)i) Natural white or tinted blue colour

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.For roof truss works. Span up to 12 Mtr

M.S.or W.I. Ornamental grill of approved design joints continuouslyweldedwithM.S, W.I. Flats and bars of windows,railingetc.fitted and fixed with necessary screw sand lugs in ground floor.Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units: Fully glazed single leaf reamless swing door made of anodized aluminium alloy extrusions fabrication after cutting to proper shapeand size,drilling and aligning fitted with heavy duty hydraulic action floor spring with top pin assembly and fitted with inbuilt locking arrangement and all other necessary fittings, fixture,adhesives and joineries, cutting the glass to requisite shape and size mounting the edges for fitting the same with dry set neoprine/EPDM gasket.

Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mmx19mmtubular Handle with Grade304,CE certified, marked & conforming to EN 1154, of approved quality of reputed brand as per direction of Eingineer-in Charge fitted and fixed complete including all incidental charges.

Godrej Hydraulic door closer fitted and fixed complete.Heavy type

Supplying, fitting fixing Godrej type hydraulic (oil check) floor door spring, heavy duty double action with brass shoe,brass top centre aluminium top cover etc. complete set as per direction of Engineer-in-charge.

Door stopper.(Brass)

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fittedand fixedwith cadmium plated screws: 75 x 45 x 2.5mm.

Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. 250mm x 16mm dia bolt.

Anodized aluminium barrel / tower / socket bolt, 150mm long x 10mm dia. bolt.

Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to IS specification (IS-230/72) fitted and fixed. With continuous plate base (Hexagonal/Round Rod) Grip 125 mm X 12 mm

Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete.

Supplyi

ng profiles of required section made of Aluminium AlloyExtrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized(with required film thickness and specified colour / natural) matt finishedconforming to IS: 1868-1983 for fabrication of composit door, sliding &casement windows, partitions, formed of basic sections of any ISIembossed / certified make and brand as per direction of Engineer - In Charge. (Payment will be made on finished length of the work).In 10-12 Micron thickness Annodizing film. Coloured. Casement window ( 40 mm Depth series). Supplying Aluminium Alloy profiles Outer frame

Supplying Aluminium Alloy profiles Mullion

Supplying Aluminium Alloy profiles Shutter

Supplying Aluminium Alloy profiles Glazing clip.

Supplying Aluminium Alloy profiles Cleat angle. (Non-annodized)

Supplying stainless steel functional hinge for casement window as perapproved brand as directed by Engineer- in -charge. (Natural White). 250 mm long

Two point nose aluminium handle including fitting and fixing.

Aluminium peg stay 300 mm long including fitting and fixing.

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. 4mm thick clear glass.

4mm thick coloured / tinted / smoke glass.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, Nosing and drip course, scaffolding / staging where necessary. [Excluding cost of chipping over concrete surface] Fifth Floor. Plaster with 1:6 cement mortar 20 mm thick plaster

Plaster with 1:6 cement mortar 15 mm thick plaster

Plaster with 1:4 cement mortar 10 mm thick plaster

Neat cement punning about 1.5 mm thick in wall, dado, window sill, floor etc. Note - Cement 0.152 cum per 100 sqm.

Band moulding (horizontal or vertical) rectangular section,made with cement plaster (1:4) complete. In ground floor.(ii) Projection upto 25 mm. (a) Depth or width (75 mm to 100 mm) (Cement 1.25 Kg/Mtr.)

Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) .Sal : Siliguri.

Dressed wood work in post , plate , battens . etc. fitted & fixed complete (excluding the cost of bolts only, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals).Sal : Siliguri.

Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One Coat.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. (Two Coats) Premium 100% Acrylic Emulsion.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On timber or plastered surface - With super gloss (hi-gloss) - Two coats (with any shade except white)

Painting on steel or other metal surface - With super gloss (hi-gloss) - Two coats (with any shade except white)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One Coat. Water based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) Luxury Quality

PVC Door Shutter-30 mm thick:Supplying fitting and fixing P.V.C. door shutter of approved quality & shade inposition, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C.multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm)wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular 'L' shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges.Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches wherefixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materials taxes and all other incidental charges complete.

Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm long M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer's specification and direction of Engineer-in-Charge.

Suppling, fitting and fixing Wall mounted water closet of white glazed vitreous chinaware of approved make and brand in position complete with necessary nut and boalts (Equivalent to Code No. 20061 or 92065 & Model Studio or Rubbic of Hindware or equivalent.)

Supplying,fitting and fixing concealed cistern of approved make with flash plateCute/Loop/Shell/Nova(CodeNo. concealo-H(80mmBodysapcode 508179 of Hindware or equivalent). Matt/Gloss

Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model-ALLIED of Jaquar or similar).

CP 2-way bib Cock- 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand).

Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).

CP Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No. 5031 & Model - FLORENTINE of JAQUAR or similar brand).

Nahani Trap

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately). PVC pipes, 20 mm

PVC pipes, 25 mm

PVC pipes, 32 mm

PVC pipes, 40 mm

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. 2000 litre capacity

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supplying, fitting and fixing 32 mm dia Flush Pipe of approved make with necessary fixing materials and clamps complete. Polythene Flush Pipe.

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 750 mm long.

Supplying,fitting and fixing approved brand 32 mm dia PVC waste pipe, with PVC coupling at one end fitted with necessary clamps. 900 mm long.

Labour for hoisting plastic water storage tank.Above 1500 litre upto 5000 lit

re capacity. Upto 6th story from G.L

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). Gunmetal wheel valve 25 mm dia.

Gunmetal wheel valve 20 mm dia.

Supplying, fitting & fixing glass shelf with aluminium guard rails, ordinary type with 5.5 mm sheet glass. 600 mm X 125 mm.

Supplying, fitting and fixing liquid soap container. Fibre glass.

Supplying, fitting and fixing soap holder. Fibre glass.

Supplying, fitting and fixing towel rail with two brackets. CP over Brass 25 mm dia and 600 mm long.

12mm thick cleared toughened glass coforming to IS: 2553-1992(Part-II)

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987; (A) clear, toughened glass conforming to IS: 2553-1992 (part-II). 8mm thick

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Matfinish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor. Glossy/Matt/Suede excluding surface texture or metallic lustre. Thickness of laminate 1.5 mm

Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303-1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor. Boiling water resistant ply 6 mm

Boiling water resistant ply 12 mm

Boiling water resistant ply 19 mm

Designing of different customised curved & plain metal craft by laser cutting on different metal sheets of varying thickness for specialar chitectural application as facade/wallpanel/ceiling decoration as per design,drawing or as approved standard by the Engineer-in-charge including transportation. (Mode of measurement - linear /peripheral dimension of laser cut area). 2.0mm thick

M.F. suspended ceiling made with 12.5mm thick Gypsum plaster board including G.I.perimeter channel of 0.55mm flush (having two flanges 20mm and 30mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9mm thick size 45mmx15mm placed at 750mm c/c withG.I. ceiling angle of size 25mmx10mmx0.55mm thick fixed to the ceilingwith G.I. Cleat and steel expansion fastener ceiling section 0.55mm thick of size 51.50mmx26mm fixed to the intermediate channels with the help of connectingclip and in the direction of perpendicular to the intermediate channel of 300mm c/c 12.5mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws.The boards are to be join ed and finished with jointing compound, paper tape and application of topcoat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete).

P.V.C False Ceiling :Providing False Ceiling made with framework of steel tube of 40mmx20mm of not less than 18gauge,the long and cross section will be welded with each other 1000mm to 1200mm apart the entire framework will be fixed in wall using rawlplug or gutties or screws etc. and suspended from ceiling with M.S flat 19mmx3mm as necessary,the entire frame will be painted with red oxide. PRINTED LAMINATED P.V.C Section 150mmx12mmx1.00mm(+/-0.01mm) of approved quality and colour will be fixed on the frame so that the entire framework will not be visible from below P.V.C Section will be fixed with the frame with the help of self tapping steel screws including all materials and labour charges including fitting,fixing the same and hoisting including mending the damages in all respect and cost of paint as required as per direction of Engineerin-Charge . In ground floor

Providing and fixing exterior quality Aluminium Composite Panel(ACP) wall cladding on existing Al./MS framework with GI brackets,ACP fixed on the existing frame work by folding the edges of ACP panel(Engraving the rear surface of ACP sheet)with CP angles,cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foamand silicon sealant etc. complete with all materials (but including thecost of siliconsealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and directionofEngineer-in-charge. (Mode of payment is on finished surface area of ACP). 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating)

Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-in charge. (This item should be executed only after prior approval of the Engineer-in charge). Firstly, one number to be paid and then labour rate for shifting up to further nineteenth (19) times @ 10% each time to be considered. If necessary further after twenty times of total use, another one number new and labour rate for shifting to be considered accordingly.

Mazdoor (Male)

Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. 60mm thick inter locking designer concrete paver block M35 grade for light-traffic zone,commercial & office complex,tourist resort as perIS:15658-2006(over20-40mm medium sand bed on 250 mm thk WBM/WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base ,sub-base course & subgrade preparation.).Coloured Decorative

Supplying & laying 20mm designer chequered tiles of any shade and of approved quality as perIS:1237:1980 laid in patterns as directed in pavement, footpath including necessary underlay 25 mm thick average cement mortar (1:3)complete in all respect with all labour and materials [using cement [email protected]/Sq.m at backside of tiles.Cement of mortar & slurry will be supplied by the Department. Border concrete if necessary to be paid separately].

Supplying and laying true to line and level Tactile Finish Scratch resistant, Neutral toUV rays,Non-fade,High Slip Resistant Full Body Vitrified Tiles conforming toIS:15622-2006 & IS:4457-2007 and tested in accordance with IS:13630 [Non-modular sizes for tiles with Skid resistance: 0.6, Mohr's hardness>7.0,Staining resistance:Class-1,Water Absorption E<0.5%],MOR >38N/sq. mm & Breaking strength>4000N for Outdoor are a of building e.g. Driveway, Pathway, Pavements, Parking lots,Sloping ramps,Entrance lobbies, Patios, Portico, swimming pool enclosure, Bus Passenger Shed & directing visually impaired persons, set over necessary under lay and 2 mm thick cement sl

urry at backside of tiles using cement @2.91Kg./Sqm, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles and removal of wax coating of top surface of tiles with warm water and cleaning the tiles using soft and dry cloth complete including the cost of materials,labour and all other incidental charges complete including backside slurry but excluding the cost of underlay and true to the manufacturer's specification and direction of Engineer-in-Charge.In Ground Floor: Sizes-300 mm x 300 mm x15 mm

Supplying,fitting,fixing Terracota Blocks of dimension 200mm X 200mm X 63 mm for decoration of walls ,ceilings creating partition walls, screens, balcony dividers in both indoor and outdoor. (Market Price)

Supplying PVC Wall Panel/Louvers Panel of dimension 250mm X 3000 mm for decoration of walls ,ceilings in both indoor and outdoor. (Market Price)