CWE/HSR-08 OF 2023-24 REPAIR/RESURFACING TO EXTERNAL ROADS INCLUDING ROAD FURNITURE IN ZONE C AND D UNDER AOR OF GE HISAR AT HISAR MIL STN

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces exc. 50 mm but not exc. 100 MM in depth and n exc 400 sqm in area and applying evenly a priming tack coat with VG-30 bituminous primer @10kg/10Sqm

M&L for Premix bituminous,macadam with 4% bitumen binder laid/rolled and compacted to required gradient and camber with power roller 8-12 tonne (consolidated thickness 75mm or less)

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming /tack coat with VG 30 paving bitumen @ 5 kg per 10 SQM complete all as specified and directed.

M&L for providing Bituminous premixed semi dense asphaltic concrete 30 mm consolidated thickness,with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient with 8-12 tonne power roller complete as specified and directed. Note - The minimum consolidated thickness will be 30 mm. However it may be increased at certain places to maintain the camber as per the site requirement and nothing extra shall be admissible on this account. The contractor must visit the site before quoting the rates

Making lines dashes arrow etc of any description exc 09 cm width/girth on road surface using hot applied thermo plastic road marking paint mixed with radium glass beads @ 250 gms/Sqm with automatic machine to provide reflectivity and night vision including cleaning the surface by removing all dirt, dust & all other foreign matters, demarcation all as specified and directed by Engr-in-Charge.

S&F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions

S&F in repair solar cat eye aluminum alloy (solar stud) shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono stafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and as directed

S&F in repairs retro reflective sign board of size 900mm x 600mm rectangular (Shape) made of 3 mm thick ACM sheets (Aluminium Composite Material) both faces fully covered with retro reflective sheeting type IV and colour as approved by Garrison Engineer, subject (Works arrows, full stop dash)/ mark / Border / Logo etc will be made as directed. Sign face will be reveted with back support frame of stainless steel pipe of 25 mm dia shape as approved and two vertical posts of 50 mm bore of stainless steel pipe 02.00 Mtr above the GL embedded in PCC 1:2:4 type B-1 block of size 30x30x60 CM post hole including PCC (1:2:4) as in foundation & necessary excavation in post hole completed all as specified and directed.

S&F in repair convex mirror having 130 degree of viewing angle made of one piece poly carbonate lens size of 0.6 mtr dia protected with any type of light ray, does not produce toxic fume if burnt, complete with mounting hardware all as specified and directed by Engr-in-Charge CAT Part No OS 789 Make:Oscar Safety and Solutions

S&F in repair ABS speed breaker / rubber rumbler of size 500 x 425/350 x50/75 rubberised, tough, strong, weather resistant capable of withstanding weight of vehicles. Comprises of segments of colour black/yellow and suitably fixed with zinc plates 12 x 120mm and nails. CAT PART no OS-794, Make : Oscar Safety Solutions and equivalent

M/S SHAKTI BUILDERS

PAWAN KUMAR

M/S RAJINDER SINGH

M/S Sulakh Brothers

M/S RAJESH KUMAR & SONS

Siya constructions

BAL SINGH AND SONS

malik constructions