AS 19 104 C

Amount

Road Works

Construction of embankment with approved materials obtained from boro pitch with a lift upto 1.5 m.,Transporting to site ,spreading , grading to required slope and compecting to meet requirement of tables 300.1 & 300.2 with a lead upto 1000m.as per technical specificatiion clause 301.6 (i)Private land . Dakhinjar Bagan to Ameri

Construction of Subgrade & Earthen Shoulders: Construction of subgrade & earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporting to the site, spreading, grading to required slope and compacted to meet requirement of Table 300-2 with lead up to 1000m as per technical specification Clause 303.1 a) Private land. Dakhinjar Bagan to Ameri

3)WBM grading 3 providing ,laying, spreading and compacting & stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness , hand packing, rolling with smooth wheel 80-100 KN roller in stages to proper grade and camber applying and brooming, stone screening /binding materials to fill up the interstices of coarse aggregates watering and compacting to the required density grading III as per Technical Specification Clause 405. (A)by mennual means. Dakhinjar Bagan to Ameri

Prime Coat, I)Low porosity:-Providing and applying Primer Coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90-1.20 Kg/Sqm using mechanical means as per Technical Specification Clause 502. Dakhinjar Bagan to Ameri

Tack Coat, (RS-1) Providing and applying Tack Coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25-0.30 Kg/Sqm on the prepared granular surfaces treated with primer and cleaned with hydraulic broom as per Technical Specification Clause 503. Dakhinjar Bagan to Ameri

20mm thick open graded Premix carpeting 20mm Thick Open Graded Premix Carpet using Bituminous Binder: Providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on previously prepared base inclusing mixing in a suitable plant, laying and rolling with three wheeled 80-100KN static roller capacity, finished to required grade and level to be followed by seal coat either type A or type B or type C as per Technical Specification Clause 508. Dakhinjar Bagan to Ameri

Seal Coat Seal Coat: Providing and laying seal coat sealing the voids in the bituminous surface laid to the specified level, grade and cross fall using Type A, Type B or Type C as per technical Specification Clause 510- By Mechanical Means TYPE-A Dakhinjar Bagan to Ameri

Retro Reflectorised Traffic Signs: Providing and fixing retro Reflectorised cautionary, mandatory and informatory traffic sign board as per IRC 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5mm thick supported on RCC post 100mmx100mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mmx450mmx600mm, 600mm below ground level as per drawing and technical specification clause 1701. 90cm equilateral triangle Dakhinjar Bagan to Ameri

Trafic signs: Retro reflectorised Trafic Signs: 60cm equilateral triangle

Trafic signs: Retro reflectorised Trafic Signs: 60cm circular

Trafic signs: Retro reflectorised Trafic Signs: 80 cm X 60cm equilateral triangle

Trafic signs: Retro reflectorised Trafic Signs: 60cm x 60cm rectangular

Kilometer stone: Reinforced cement concrete M15 grade kilometre stone/locak stone of standard design as per IRC:8 fixing in position including painting and printing,etc as per drawing and Technical Spacification Clause 1703 Kilometers Stone Reinforce cement concrete M15 grade, Ordinary Kilometer Stone (precast) Dakhinjar Bagan to Ameri 5th km stone (precast) Ordinary Kilometer Stone (precast)

200m Stone (precast).

Providing & fixing' Logo' of PMGSY Project: Providing and fixing of typical PMGSY informatory sign board with logo as per MORD Specifications drawing.Three M.S. plats of 1.6mm thick top and middle plate duly welded with M.S. flate iron 25mm x 5mm size on back on edges . The lower plate will be welded with M.S. iron frame of 25mm x 25mm x 5mm .The angle iron frame of the lower most plate and flate iron frame of middle plate will be welded to (2)Nos. 75mmx75mm of 12SWG sheet tubes posts duly embeded in C.C.M-15 grade blocks of 450mm x 450mm x 600mm , 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube .All M.S. will be stove enameled on both sides.Lettering & printing arrows ,border etc. will be painted with ready mixed synthetic enamel paint of supirior quality in reqd.shade and colour .All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1. Providing and fixing 'Logo' of PMGSY Dakhinjar Bagan to Ameri

Citizen informatory board Dakhinjar Bagan to Ameri

safety devices in construction zone provisions and fixing trafic signs for limited period at suitable locations in construction zone cmprising of warning zone, approach transition zone, working zone & terminal transition with a minimum distance of 2-3m from the ege of the carriage way. the bottom edge of the lowest sign plate to be not less than 2m above the road level, fixed on 600mmx600mmx6mm angle iron post, founded and installed as per aproved design and drawings, removed and disposed of after completion of construction works, all as per IRC-SP:55-2001. following types of signs are reqiured to be fixed in construction zones for safety of trafics; trafic sign ahead, Dakhinjar Bagan to Ameri 90cm equilateral triangle

60cm equilateral triangle Dakhinjar Bagan to Ameri

60 cm circular Dakhinjar Bagan to Ameri

Rectification of Work

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (I) Private Land

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means