CA NO. GE(P)AF/GUR-73/2022-23 REPAIR/MAINTENANCE AND SERVICING OF CEILING FAN, EXHAUST FAN, WALL FAN, AIR CIRCULATOR, INTERNAL ELECTRIFICATION, FITTING AND FIXTURE AND OTHER CONNECTED ITEMS IN TECH AREA AT AF STN PALAM UNDER GE AF GURGAON NO 1.

Amount

Taking down ceiling fan / exhaust fan / ventilating fan / wall mountd fan / pedastal fan / cabin fan/ air circulaor fan any sweep from sealing cable end, dismantling blades and removing fan and blades to store and reassembling and refixing the fan after repairing/servicing complete all as specified and directed.

M&L for opening ceiling fan any type & any sweep, cutting the burnt winding, rewinding with super enamelled copper wire as per existing size and gauge with and including provision of insulating material varnishing with good quality varnish including replacement of all unserviceable parts such as safety pin, fan clamp with rubber bush,bearings and twin core flexible copper wire etc complete all as specified and as directed by Engr-in-charge.

M&L for opening pedastal fan any type, any make and of any sweep, cutting the burnt winding, rewinding with super enamelled copper wire as per existing size and gauge after providing all required insulating material varnishing with good quality varnish including replacement of all unserviceable minor parts such as safety pincopper wire complete all as specified and as directed by Engineer-in-Charge.

M&L for opening of 400/450 mm sweep exhaust fan any type and any make cutting the burnt winding, rewinding with super enamelled copper wire as per existing size and gauge after providing all required insulating material varnishing with good quality varnish including replacement of all unserviceable minor parts such as safety pin, bearing, bush and capacitors complete all as specified and as directed by Engineer-in-Charge.

M&L for opening of 300 mm sweep exhaust fan any type and any make cutting the burnt winding, rewinding with super enamelled copper wire as per existing size and gauge after providing all required insulating material varnishing with good quality varnish including replacement of all unserviceable minor parts such as safety pin, bearing, bush and capacitors complete all as specified and as directed by Engineer-in-Charge.

Supply & fixinging in replacement of copper wound motor suitable for 300/400 mm sweep wall mounted Fan complete as per matching to existing type and gauge complete all as specified and as directed by Engineer- in Charge.

Supply & fixinging in replacement of copper wound Fan motor for exhaust Fan metal body 250/300mm sweep complete as per matching to existing type and gauge complete all as specified and as directed by Engineer- in Charge.

Supply & fixinging in replacement of copper wound Fan motor for exhaust Fan metal body 400/450 mm sweep complete as per matching to existing type and gauge complete all as specified and as directed by Engineer- in Charge.

Supply & fixinging in replacement of copper wound Fan motor for Ventilating Fan PVC body 200mm sweep with front lock complete as per matching to existing type and gauge complete all as specified and as directed by Engineer- in Charge.

Supply & fixinging in replacement of copper wound Fan motor for pedastal Fan 400/450 mm sweep complete as per matching to existing type and gauge complete all as specified and as directed by Engineer- in Charge.

Supply & fixinging in replacement of gear system suitable for 300/400 mm sweep wall mounted Fan complete as per matching to existing type and model complete all as specified and as directed by Engineer- in Charge.

Supply & fixinging in replacement of rotary switch suitable for 300/400 mm sweep wall mounted Fan complete as per matching to existing type and model complete all as specified and as directed by Engineer- in Charge.

Supply & fixing in replacement of PVC body complete suitable for 300/400 mm sweep wall mounted Fan complete as per matching to existing type and model complete all as specified and as directed by Engineer- in Charge.

Supply & fixing in replacement of frame and clamp with rubber complete set suitable for 300 mm sweep exhaust fan complete as per matching to existing type and model complete all as specified and as directed by Engineer- in Charge.

Supply & fixing in replacement of frame and clamp with rubber complete set suitable for 400 mm sweep exhaust fan complete as per matching to existing type and model complete all as specified and as directed by Engineer- in Charge.

Supply & fixing in replacement of frame and clamp with rubber complete set suitable for 450 mm sweep exhaust fan complete as per matching to existing type and model complete all as specified and as directed by Engineer- in Charge.

Supply & fixing in replacement of louvers for metal body 300 mm sweep exhaust fan for kitchen as per matching to existing complete all as specified and as directed by Engineer- in Charge.

Supply & fixing in replacement of louvers for metal body 400/450 mm sweep exhaust fan for kitchen as per matching to existing complete all as specified and as directed by Engineer- in Charge.

M&L for opening and cleaning of exhaust fan including blades of any type any make with oil and dirt removing solution and refixing back to existing location complete all as specified and as directed by Engineer- in Charge.

Supply and fixing down rod 12mm dia made out of high density mild steel 300mm long as per approved sample complete all as directed.

M&L in replacement of nut and bolt (not less than 2.5 inches) and 0.25 inches dia with suitable size rubber reel for hanging of ceiling fan complete all as specified and directed.

M&L in replacement of PVC canopy of any size and shape suitable for existing ceiling fan make complete all as specified and directed.

M&L in replacement of blades of 1200mm sweep made of aluminium sutiable for ceiling fans complete all as specified and directed.

Supply and fixing in replacement of fan stator with copper winding as per sample and make the ceiling fan serviceable all as specified and directed

Supply and fixing in replacement of fan stator housing with bearing as per sample and make the ceiling fan serviceable all as specified and directed

Supply and fixing in replacement of ceiling fan hanging clampwith rubber bush complete as per sample all specified and directed

Supply and fixing in replacement of ceiling fan shaft and make the ceiling fan serviceable complete all as specified and directed.

Supply only fan capacitor/condensor 1.5 MFD, 240 volt of ceiling fan/exhaust fan/wall mounted fan complete all as specified and directed. Make : Tibcon/Havells

Supply only fan capacitor/condensor 2.5 MFD, 240 volt of ceiling fan/exhaust fan/wall mounted fan complete all as specified and directed. Make : Tibcon/Havells

Supply only fan capacitor/condensor 3.15 MFD, 240 volt of ceiling fan/exhaust fan/wall mounted fan complete all as specified and directed. Make : Tibcon/Havells

Supply only fan capacitor/condensor 4.0 MFD, 240 volt of exhaust fan complete all as specified and directed. Make : Tibcon/Havells

Supply only Fan blade for wall fan 300/400mm sweep as per matching to existing complete all as specified and as directed by Engineer- in Charge.

Supply only Fan blade for ventilating fan 200/300mm sweep as per matching to existing complete all as specified and as directed by Engineer- in Charge.

Supply only Fan blade for metal exhaust fan 300 mm sweep as per matching to existing complete all as specified and as directed by Engineer- in Charge.

Supply only Fan blade for metal exhaust fan 400/450 mm sweep as per matching to existing complete all as specified and as directed by Engineer- in Charge.

M&L for painting to ceiling fan/Exhaust fan any sweep complete, in-situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.complete.

Supply only hylam sheet round corner of size as required at site, complete all as specified and as directed by Engr-in-Charge. Note:- cost of cuttung of hylam sheet is deemed to be fit in the quoted amount

Supply and fixing in replacement of on wall , Plug and socket in sheet steel enclosure with Single pole & earth , suitable for 20 Amp with providing MCB SP 20 Amp suitable for single phase AC supply complete all as specified and directed.

Supply only switch Modular one module one way 10 Amp complete all as specified and as directed by Engineer-in-charge.

Supply only bell switch Modular one module 10 Amp complete all as specified and as directed by Engineer-in-charge.

Supply only switch Modular one module two way 10 Amp complete all as specified and as directed by Engineer-in-charge.

Supply only switch Modular one module one way 16 Amp complete all as specified and as directed by Engineer-in-charge.

Supply only Modular type socket outlet shuttered two module combined 6/16 amps multipurpose complete all as specified and directed by Engineer-in-charge.

Supply only Modular type socket outlet shuttered two module 5 pin 6 amps multipurpose complete all as specified and directed by Engineer-in-charge.

Supply only Modular Electronic Fan regulator 5 stepped type 02 module complete all as specified and as directed by Engineer-in-charge.

Supply only Modular Electronic Fan regulator 4 stepped type 01 module complete all as specified and as directed by Engineer-in-charge.

Supply only Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply only 3 pin 05 Amps switch socket combination, box type multipurpose 2 in 1 type (3 pin 5 Amps ) all as specified and directed.

Supply only 3 pin 15 Amps switch socket combination, box type multipurpose 2 in 1 type (3 pin 5 Amps and 15 Amps) all as specified and directed.Make : Anchor/Cona/Havells.

Supply only metal clad plug 20A 2P+E, 230V AC , complete all as specified and as directed by Engr-in-Charge. Make:- Indoasian cat part no:- 810386 or equivalent as approved

Supply only metal clad socket 20A 2P+E, 230V AC , complete all as specified and as directed by Engr-in-Charge. Make:- Indoasian cat part no:- 810390 or equivalent as approved

Supply only 12 watt ball type LED lamp, 230 volt suitable for recess mounting light fittings complete all as specified and directed.

Supply only in replacement of Ding dong call bell , complete all as specified and as directed by Engr-in-Charge.

Supply only 3 Pin plug top 16 Amps complete all as specified and as diercted by Engineer-in charge.

Supply only 3 Pin plug top 6 Amps complete all as specified and as diercted by Engineer-in charge.

Supply only 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) all as specified.

Supply only ceiling rose, 5 Amps surface type 240 volts bakelite three terminal as ordered and directed .

Supply only Switch piano, single pole one way 5 Amps 240 volt capacity flush type all as specified.

Supply only 3 pin 5 Amps socket flush type multi purpose 2 in 1 type (2 pin and 3 pin) and all as specified and directed.

Supply only 5 pin, 5 Amps switch & socket combination flush type multipurpose 2 in 1 ( 2pin & 3 pin) complete all as specified and directed.

Supply only switch type fan regulator electronic step type 230 volts suitable for any type of ceiling fan sweep complete all as specified and directed.

Supply only Switch flush type , 05 Amp single pole , two way complete all as specified and directed.

Supply only of socket type fan regulator electronic step type 230 volts suitable for any type of ceiling fan sweep all as specified and directed.

Supply only Switch piano, single pole one way 15/16 Amps 240 volt capacity flush type complete all as specified and directed.

Supply & fixing in replacement of PVC body complete for 200/250/300 mm sweep ventilating fan as per matching to existing complete all as specified and as directed by Engineer- in Charge.

Supply only thread type dry wall gypsum screws of size 6 mm dia upto 50 mm length as per reqmt complete all as specified and specified and directed.

Supply only Complaint slip book having serially numbered 100 pages with duplicate copy as per sample

Supply only Complaint register book having serially numbered 100 pages as per sample

Supply only PVC rawl plug of size 6 mm dia upto 50 mm length as per reqmt complete all as specified and specified and directed.

Taking down carefully point wiring of any type, size and description (light, fan, socket outlet etc.) including removal of battens, pipes, sockets, switches, ceiling roses, light fittings etc, complete and making good the disturbed surfaces to match with existing, all as specified and as directed.

M & L for concealed point wiring complete with FRLS PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100 volt grade , alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly in and including PVC conduit pipe fitting medium grade of 20 mm dia fixed in concealed surface of wall/ceilling/false ceilling including cutting /chasing in wall as required with powder coated sheet metal terminal boxes of required sizes and thickness (factory made) sunk in wall only with 3.0mm thick laminated sheet where as required and accessories complete suitable for the following :-

One light/fan point controlled by one on way switch

One socket outlet 05 Amps on the same board

One socket outlet 05 Amps on independent board

One bell/buzzer point controlled by on bell push

One light point controlled by two 2- way switches with cables 1.5 sqmm size.

-Ditto- as per item No. 71.00 above but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket and all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable 1100 volt grade, (FRLS) through and including 20 mm PVC conduit pipe and its accessories, cadmium screws and including 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable(FRLS) as earth continuity conductor and MS boxes made of 16 gauge MS sheet concealed type on walls cover 3mm thick for housing the specified and directed for the following :-

One light/fan point controlled by one on way switch

One socket outlet 05 Amps on the same board

One socket outlet 05 Amps on independent board

One bell/buzzer point controlled by on bell push

One light point controlled by two 2- way switches with cables 1.5 sqmm size.

-Ditto- as per item No. 73.00 above but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket and all as specified and directed.

S&F in replecement of Modular switch, one way 6 Amps , 1 module complete all as specified and directed.

S&F in replecement of Modular Socket , 6 A-2/3 Pin combined 2 module complete all as specified and directed.

S&F in replecement of Modular switch socket combination 16 Amps 6 pin 3 module complete all as specified and directed.

S&F in replecement of Modular switch, one way 16 Amps , 1 module complete all as specified and directed.

S&F in replecement of Modular Bell push 6 Amps , 1 module complete all as specified and directed.

S&F in replecement of Modular Fan step Regulator ,120 W-2 module complete all as specified and directed.

S&F in replecement of switch 2 way 6Amps, 1 Module complete all as specified and directed.

S&F in replecement of Switch piano, single pole one way 5 Amps 240 volt capacity flush type complete all as specified and directed.

S&F in replecement of 3 pin 5 Amps socket flush type multi purpose 2 in 1 type (2 pin and 3 pin) complete all as specified and directed.

S&F in replecement of 5 pin, 5 Amps switch & socket combination flush type multipurpose 2 in 1 ( 2pin & 3 pin) complete all as specified and directed.

S&F in replecement of Switch piano, single pole one way 16 Amps 240 volt capacity flush type complete all as specified and directed.

S&F in replecement of 3 pin 15/16 Amps socket flush type multi purpose 2 in 1 type (2 pin and 3 pin) complete all as specified and directed.

S&F in replecement of 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) complete all as specified and directed.

S&F in replecement of ceiling rose, 5 Amps surface type 240 volts bakelite three terminal complete all as specified and directed.

S&F in replecement of Bell push piano type, single pole one way 5 Amps 240 volts capacity flush type complete all as specified and directed.

S&F in replecement of electric bell ding dong AC 230 volt single pole complete all as specified and directed.

S&F in replecement of fan regulator electronic step type 230 volts suitable for any type of ceiling fan sweep all as specified and directed.

S&F in replecement of Switch flush type , 05 Amp single pole , two way complete all as specified and directed.

S&F in replecement of Modular White cover plate with frame for 3 module complete all as specified and directed.

S&F in replecement of Modular White cover plate with frame for 4 module complete all as specified and directed.

S&F in replecement of Modular White cover plate with frame for 6 module complete all as specified and directed.

S&F in replecement of Modular White cover plate with frame for 8 module complete all as specified and directed.

Taking down old and unserviceable sub main wiring of any size and description and removable the same from site and making good the disturbed surfaces/portion of walls etc. all as directed.

M&L for concealed sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit pipe 25 mm dia medium grade and accessories of suitable size and fixed on concealed surface of wall/ceiling with cutting chases for conduit including one run of 4.0 Sqmm single core PVC insulated, FRLS , flexible multi stranded copper cable as earth continuity conductor in green color all as specified and as directed.Note- (a) Two runs of single core cable with one run of earth continuity cable including PVC conduit and its accessories will be measured and paid as one unit.(b) Make disturbed surface good to wall/floors .

M&L for concealed sub main wiring of two run with 06 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit pipe 25 mm dia medium grade and accessories of suitable size and fixed on concealed surface of wall/ceiling with cutting chases for conduit including one run of 6.0 Sqmm single core PVC insulated, FRLS , flexible multi stranded copper cable as earth continuity conductor in green color all as specified and as directed. Note- (a) Two runs of single core cable with one run of earth continuity cable including PVC conduit and its accessories will be measured and paid as one unit.(b) Make disturbed surface good to wall/floors .

M&L for sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC casing-n-coping/conduit pipe as per site requirement medium grade and accessories of suitable size and fixed on wall/ceiling including one run of 4.0 Sqmm single core PVC insulated, FRLS , flexible copper cable as earth continuity conductor in green color all as specified and as directed.

M&L for sub main wiring of two run with 06 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC casing-n-coping/conduit pipe as per site requirement medium grade and accessories of suitable size and fixed on wall/ceiling including one run of 6.0 Sqmm single core PVC insulated, FRLS , flexible copper cable as earth continuity conductor in green color all as specified and as directed.

Taking down distribution boards etc of any type and capacity along with the existing boards, and removing the same from site and making good the disturbed surfaces/portion of walls etc. all as directed. Note : DB boxes will be measured and paid separately under respective item of schedule.

S&F SPN 2 way sheet metal enclosures for flush/surface mounting distribution board Single door, 240 volts without bus bar complete all as specified and directed.

S&F SPN 4 way sheet metal enclosures for flush/surface mounting distribution board double door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed

S&F SPN 6 way sheet metal enclosures for flush/surface mounting distribution board single door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed

S&F SPN 8 way sheet metal enclosures for flush/surface mounting distribution board single door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed

S&F SPN 12 way sheet metal enclosures for flush/surface mounting distribution board single door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed

S&F TPN 4 way sheet metal enclosures for flush/surface mounting distribution board single door, 415 volts factory made and tested complete, suitable for mounting MCBs with cable lugs complete all as specified and directed

S&F TPN 06 way sheet metal enclosures for flush/surface mounting distribution board single door, 415 volts factory made and tested complete, suitable for mounting MCBs with cable lugs complete all as specified and directed

S&F TPN 08 way sheet metal enclosures for flush/surface mounting distribution board single door, 415 volts factory made and tested complete, suitable for mounting MCBs with cable lugs complete all as specified and directed

S&F in replacement of MCCB DB double door type TPN upto 4 way vertical type without MCB/MCCB complete all as specified and as directed by Engr-in-charge.

S&F in replacement of MCCB DB double door type TPN upto 8 way vertical type without MCB/MCCB complete all as specified and as directed by Engr-in-charge.

Taking down unsv MCBs from distribution boards etc of any type and capacity , and removing the same from site and making necessary connections complete all as directed. Note : New MCBs will be measured and paid separately under respective item of BOQ/ Schedule.

S&F in replacement of MCB SP of rating, 06 to 32 Amp,240 volt, 10 KA 'B' Series complete all as specified and directed.

S&F in replacement of MCB SP of rating, 40 Amp,240 volt, 10 KA 'B' Series complete all as specified and directed.

S&F in replacement of MCB SNP of rating 06 to 32 Amp, 240 Volt, 10 KA, 'B' series complete all as specified and directed.

S&F in replacement of MCB SPN of rating 40 Amp, 240 Volt, 10 KA, 'B' series complete all as specified and directed.

S&F in replacement of MCB SPN of rating 63 Amp, 240 Volt, 10 KA, 'B' series complete all as specified and directed.

S&F in replacement of MCB TPN of rating 63 Amp, 240 Volt, 10 KA, 'B' series complete all as specified and directed.

S&F in replacement of MCB TP of rating 63 Amp, 240 Volt, 10 KA, 'B' series complete all as specified and directed.

S&F in replacement of 40 Amps RCCB AC-type (DP-2M) 240/415 Volt, 50 Hz , 10 KA short circuit capacity and breaking capacity 100 mA complete all as specified and directed.

S&F in replacement of 63 Amps RCCB AC-type (DP-2M) 240/415 Volt, 50 Hz , 10 KA short circuit capacity and breaking capacity 100 mA complete all as specified and directed.

Taking down unserviceable MCCBs from MCB DB VTPN board and making necy cable connections complete all as specified and directed .

S&F in replacement of MCCB 3 Pole 415 V. fixed type, 63 Amps with breaking capacity 16 KA complete all as specified and directed.

S&F in replacement of MCCB 3 Pole 415 V. fixed type, 100 Amps with breaking capacity 16 KA complete all as specified and directed.

S&F in replacement of MCCB 3 Pole 415 V. fixed type, 125 Amps with breaking capacity 16 KA complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 shown in SSR connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

M&L for flame proof point wiring complete using colour code with two run of 1.5 Sqmm single core multi-stranded copper conductor ZHLS PVC insulated and unsheathed multistrandard copper conductor cable 1100 V grade conforming to IS-694 drawn through and including ERW steel conduit 20 mm dia (external flame froof) heavy grade (IS Marked) including necessary all accessories/fixtures , concealed in wall , ceiling including sunken type pressed steel terminal boxes with flame retardant sheet of approved shade 3 mm thick including providing continuous earth wire with one single run of 1.5 sq mm single core mult-stranded copper conductor ZHLS, PVC insulated and unsheathed cable 1100 volts grade conforming to IS 694 for one light point controlled by one way flame proof switch etc , complete all as directed by Engineer-In-Charge. Note : The cost of cutting chases in wall /floor/ceiling wherever required and making good the surface as exists shall be deemed to be included in respective items of schedule.

S&F in replacement of LED light fitting 2x 16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed . Make : Baliga/Sudhir/GEC/ Alsthom.

M&L for opening of 450/457 mm sweep flame proof exhaust fan any type and any make cutting the burnt winding, rewinding with super enamelled copper wire as per existing size and gauge after providing all required insulating material varnishing with good quality varnish including replacement of all unserviceable minor parts such as safety pin, bearing, bush and capacitors complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of Flame proof and weather proof single pole rotary/cam switch on-off with direct entry single pole 16A on-off in AL LM-6, 230V complete. Make:- Sudhir Switch gear Pvt Ltd Cat No. SS/OA/1010-2A / Flexpro Cat Part No. (R) MFRS/104/1-New Model/ Baliga/Alsthom/ GEC & certified by CMRI Dhanbad all as directed by Engineer-in-Charge.

S&F in replacement of 4 ft 18/20 watt Decorative ultra slim aluminium LED lighting fixture with high lumen output, environmental friendly, energy complete all as specified and directed by Engr-in-charge.

S&F in replacement of 2 feet 09 W slim LED battern (cool day light) Basic all purpose surface and wall mounted with polycarbonate housing & integrated with electronic driver complete all as specified and directed by Engr-in-charge.

S&F in replacement of Decorative wall light fixture made up of Polycarbonate, suitable for 9W LED Lamp B22 base complete with all accessories as per sample , complete all as specified and as directed by Engr-in-Charge.

S&F in replacement 40/42 Watt (+/- 5%) LED recess mounting fitting(2' x 2') CRCA powder coated having polycarbonate diffuser powedered by independent electronic LED driver haing IP 20 protection,CCT 6000 K,230/240 VAC,lumen efficacy > 140 lm/w including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.Make:- Havells / Philips/ GE/Bajaj/ Eveready or equivalent out of make specified in list of make.

S&F in replacement 40/42 Watt (+/- 5%) LED recess mounting fitting(1' x 4') CRCA powder coated having polycarbonate diffuser powedered by independent electronic LED driver haing IP 20 protection,CCT 6000 K,230/240 VAC,lumen efficacy > 140 lm/w including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.Make:- Havells/ Philips/ GE/Bajaj or equivalent out of make specified in list of make.

S&F recess/surface mounted 12 watt (+/- 5%) Trim Plus LED Panel Square Aesthetically designed recessed mounted panel in a light weight plastic body of size 145 x 145 mm complete with all accessories internally connecting up with three core flexible copper cable of suficient size, 240 Volt complete all as specified and as directed by Engr-in-Charge. Make:- Havells/Orient/ Bajaj/Philips/Crompton or equivalent out of make specified in list of make.

S&F recess/surface mounted 12 watt (+/- 5%) Trim Plus LED Panel round Aesthetically designed recessed mounted panel in a light weight plastic body suitable for 145 mm dia ceiling cutout complete with all accessories internally connecting up with three core flexible copper cable of suficient size, 240 Volt complete all as specified and as directed by Engr-in-Charge. Make:- Havells/Orient/ Bajaj/Philips/Crompton or equivalent out of make specified in list of make.

S&F LED driver 40/42 W 240 Volt 50Hz suitable for existing 2'×2' square type ceilling light as per sample complete all as specified and as directed by Engr-in charge. Make: Halonix/Syska/C&S or equivalent out of makes specified in list of makes.

S&F LED driver 40/42 W 240 Volt 50Hz suitable for existing 1'×4' rectangular type ceilling light as per sample complete all as specified and as directed by Engr-in charge. Make: Halonix/Syska/C&S/ or equivalent out of makes specified in list of makes.

S&F LED driver 12/15W 240 Volt 50Hz suitable for existing tyoe fancy rounded ceilling light Type: DN170C LED10S-6500 PSU WH complete all as specified and as directed by Engr-in charge. MAKE: Philips/Syska/C&S or equivalent out of makes specified in list of make.

S&F LED driver 21 W 240 Volt 50Hz suitable for existing type fancy rounded ceilling light Type: DN170C LED10S-6500 PSU WH complete all as specified and as directed by Engr-in charge. MAKE: Philips/Syska/C&S or equivalent out of makes specified in list of makes.

M&L in replacement of IP-44 Industrial type interlocking Socket with electrical cabling for circuit breakers 2 pole + E Enclosure with internal wiring, Industrial socket male/female connector 16 Amps. 3 pin (with 2 mtr cable ) complete all as specified and as directed by Engr-in charge.

Supply and fixing in replacement of 36 watt FTL fitting with 25 watt LED street light fitting including with suitable size mounting bracket complete all as specified and directed by Engr-in-charge. Make : Havells/Crompton/Bajaj /Eveready or equivalent out of makes specified in list of makes.

M&L for disconnect the cable connection from rolling shutter and opening of motor body any type & any size, cutting the burnt winding, rewinding with super enamelled copper wire as per existing size and gauge with and including provision of insulating material varnishing with good quality varnish including replacement of all unserviceable parts such as bearings and twin core flexible copper wire etc complete all as specified and as directed by Engr-in-charge.

Notes:- (a) The amount of Rs 137413.00 against Schedule of Credit shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. (b) The items supplied by contractor as supply only shall be taken on charge by deptt. (c) Any disturbed surface during execution of work shall be made good as existing. Nothing extra shall be paid in this respect. The quoted rate are deemed to be included the same cost.

S.R. Constructions

SM CONSTRUCTION COMPANY

Bluemax Associate

Grid Infratech Pvt Ltd

M/S Anand Enterprises

Shrikanth Solutions