DCW-Shifting and Conversion of existing HT Lines 11KV 3CX300 Sqmm UG Cable with related materials in 11 KV Sowripalayam SRC Jayaleshmi feeders off Peelamedu 110 11 KV SS at Sri Vari appartments Trichy road Coimbatore 45 in West Singanallur s

Earth work excavation in all kinds of soils within an Initial lead of 10m and lift of 2m in trenches(Narrow pits)

Removing the black topping at any thickness for forming cable trench and cable duct at road crossing 60 cm wide and 135 cm deep from road surface (clear) including cost of providing sign boards danger lights indication arrange ments where ever necessary, lead,lift labour and tools and plants etc., complete.

Providing crusher dust instead of sand bedding with good quality to a depth upto 150mm (6") including cost of materials, labour, leads and lifts etc.., complete

Refilling with excavated earth, consolidating in layers and the tope brought for line with the existing surface including cost of labour lead lift etc.., complete.

Supplying of 11 KV RCC"V"troughs and laying over the UG cable to proper grade and alignment inside the cable trench, printing letters of not less than 75mm on either side of the troughs as directed by the Engineer incharge of works including the cost for all materials,transporting of troughs from the source to the destination upto 10 kms stenciling,paints,brushes all leads and lifts etc.,complete.

Uncoilng and laying of 11 KV cable in the excavated trench including drawing the cable through RCC/Gi/PVC pipes wherever necessary at road crossings etc.., without any damage/including transporting of cables tools and plants labour lead lift etc.., complete

Cutting the cable of required lentgh and sealing the ends with suitable end caps for 11 KV XLPE cables, including cost of all materials, tools and paints leads and lifts etc.., complete.

Transporting of the remains of the empty cable drums (iron materials) to the stores for devolution including loading and unloading , leads and lifts etc.., complete.

Supply of erection of cable marker in RCC(1:2:4) using 20mm HBs metal of size 0.3x0.60m and of 100mm thick engraving letters "TNEB" UG cable painting the engraved letters , fixing the cable marker in a bed of PCC (1:3:60) using 20mm HBs metal of size 0. 0.45X0.3X0.45 m including cost of all materials,labour, transporting to the destination all leads and lifts etc.,complete.

Erection of 11KV 3X300 sqmm (7 Nos) Stright joint kits

Erection of 11KV 3X300 sqmm (6 Nos) OD end termination kits.

UG cable earthing by coil earthing

Erection of RSJ 36' Pole

Dismantling of RSJ 36' Pole

Dismantling of Double Channel cross Arm

Dismantling of Top Channel For DP Structure 10' centre

Dismantling of Cross bracing set

Dismantling of LT 3Phase channel X Arm

Dismantling of ACSR7/4.09mm conductor

Dismantling of 11KV 3x300 sqmm UG Cable

Dismantling of 11KV Strain Disc with MP

Dismantling of 11KV Pin insulator with pin

Dismantling of 11KV AB Switch with PT

Please Enable Macros to View BoQ information