Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.0 CrAccepted-Finance | ₹3.0 Cr | 1 | Accepted-Finance lowest quoted rate |
| 2 | 2₹3.2 Cr+₹12.9 L (4.27%)Rejected-Finance | ₹3.2 Cr+₹12.9 L (4.27%) | 2 | Rejected-Finance High quoted rate |
| 3 | 3₹3.2 Cr+₹13.5 L (4.47%)Rejected-Finance | ₹3.2 Cr+₹13.5 L (4.47%) | 3 | Rejected-Finance High quoted rate |
| Sl No | Description | Qty | Unit | Hari Ram Bhanwar Lal L3 | M/S R N C INFRA PROJECT L2 | M/s RSC INFRATECH DEVELOPERS LLP L1 |
|---|---|---|---|---|---|---|
| 1.00 | Side shuttering including propping etc. complete (to achieve finish F 2 for :Block joints of foundation stilling basins buckets, aprons etc. (non -suspended horizontally laid mass concrete) | 1,862 | Sqm | 100 ₹1,86,200 Lowest | 150 ₹2,79,300 | 140 ₹2,60,680 |
| 2.00 | Supplying of M.S. reionforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts using. Tor or ribbed bars (IS :1786-1985) | 9,952.48 | Kg. | 70 ₹6,96,673.6 | 69 ₹6,86,721.12 Lowest | 80 ₹7,96,198.4 |
| 3.00 | Design, Drawing, fabrication, supply, erection, testing and commissioning of Vertical lift sliding type gate with frame consisting of skin plate, sealing frame, stiffeners, horizontal and vertical girders, guide, stainless steel flat/Brass flat, rivets, wedges, lifting rods etc., with all accessories as per relevant IS code including frame & gate complete set for Canal Cross, Escape, Head regulator /Tank head regulator including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, seal fixing, tools and tackles etc., applying two coat of zinc rich epoxy primer to give dry film thickness of 70 5 microns and finish coat (two coats) of solvent less coal tar epoxy paint using airless spray to provide dry film thickness of 150 5 microns per coat thus total dry film thickness of all coats, including primer coating, should not be less than 350 microns., complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding, transportation charges for structural steel components and other materials. | 0.6 | tonne | 10 ₹6 Lowest | 1,70,000 ₹1,02,000 | 1,74,000 ₹1,04,400 |
| 4.00 | Cutting & clearance of jungle, bushes, shrubs Ankra/Ipomoea, Juliflora typna etc. on canal and bunds in dry/moist/slushy conditions including disposal as per instructions of the Engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Ordinary | 4,129.06 | Sqm | 10 ₹41,290.6 | 1 ₹4,129.06 Lowest | 1 ₹4,129.06 Lowest |
| 5.00 | Cutting & clearance of jungle, bushes, shrubs Ankra/Ipomoea, Juliflora typna etc. on canal and bunds in dry/moist/slushy conditions including disposal as per instructions of the Engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick | 1,43,025 | Sqm | 1 ₹1,43,025 Lowest | 2 ₹2,86,050 | 1 ₹1,43,025 Lowest |
| 6.00 | Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate upto 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of: 75 mm | 3,764.85 | Sqm | 400 ₹15,05,940 | 450 ₹16,94,182.5 | 1 ₹3,764.85 Lowest |
| 7.00 | Cutting and uprooting of trees including removing of roots and filling of hole, cutting/up rooted would be property of the department 7.5 cm to 15 cms girth | 73 | Each | 25 ₹1,825 | 35 ₹2,555 | 1 ₹73 Lowest |
| 8.00 | Cutting and uprooting of trees including removing of roots and filling of hole, cutting/up rooted would be property of the department Over 15 cms to 30 cms. girth | 47 | Each | 25 ₹1,175 | 121 ₹5,687 | 1 ₹47 Lowest |
| 9.00 | Cutting and uprooting of trees including removing of roots and filling of hole, cutting/up rooted would be property of the department Over30 cms to 45 cms. girth | 28 | Each | 25 ₹700 | 201 ₹5,628 | 10 ₹280 Lowest |
| 10.00 | Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 150mm NP3 | 80 | RM | 10 ₹800 Lowest | 450 ₹36,000 | 500 ₹40,000 |
Tender Value
₹3.5 Cr
EMD Value
₹7 L
Closing Date
10 Nov 2025, 3:00 pmClosed
ACE WR Zone Jaipur
O/o Additional Chief Engineer Water Resources Zone, JLN Marg, Sinchai Bhawan Jaipur
Rehabilitation of Mundooti Damn Minor Irrigation Project District Ajmer
2025_WRDAS_507528_1
ACE NIT 30/2025-26_Mundooti_JICA
Open Tender
Civil Works
Item Rate
547 days
under jurisdiction of EE Ajmer division I
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
as per nit
₹7 L
Jaipur
9 Dec 2025
16 Oct 2025
11 Nov 2025
16 Oct 2025
10 Nov 2025
16 Oct 2025
29 Oct 2025
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Side shuttering including propping etc. complete (to achieve finish F 2 for :Block joints of foundation stilling basins buckets, aprons etc. (non -suspended horizontally laid mass concrete) | 1,862 | Sqm | 160 | ₹2,97,920 |
| 2 | Supplying of M.S. reionforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts using. Tor or ribbed bars (IS :1786-1985) | 9,952.48 | Kg. | 89 | ₹8,85,770.72 |
| 3 | Design, Drawing, fabrication, supply, erection, testing and commissioning of Vertical lift sliding type gate with frame consisting of skin plate, sealing frame, stiffeners, horizontal and vertical girders, guide, stainless steel flat/Brass flat, rivets, wedges, lifting rods etc., with all accessories as per relevant IS code including frame & gate complete set for Canal Cross, Escape, Head regulator /Tank head regulator including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, seal fixing, tools and tackles etc., applying two coat of zinc rich epoxy primer to give dry film thickness of 70 5 microns and finish coat (two coats) of solvent less coal tar epoxy paint using airless spray to provide dry film thickness of 150 5 microns per coat thus total dry film thickness of all coats, including primer coating, should not be less than 350 microns., complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding, transportation charges for structural steel components and other materials. | 0.6 | tonne | 1,74,880 | ₹1,04,928 |
| 4 | Cutting & clearance of jungle, bushes, shrubs Ankra/Ipomoea, Juliflora typna etc. on canal and bunds in dry/moist/slushy conditions including disposal as per instructions of the Engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Ordinary | 4,129.06 | Sqm | 1.45 | ₹5,987.14 |
| 5 | Cutting & clearance of jungle, bushes, shrubs Ankra/Ipomoea, Juliflora typna etc. on canal and bunds in dry/moist/slushy conditions including disposal as per instructions of the Engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick | 1,43,025 | Sqm | 2.5 | ₹3,57,562.5 |
| 6 | Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate upto 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of: 75 mm | 3,764.85 | Sqm | 480 | ₹18,07,128 |
| 7 | Cutting and uprooting of trees including removing of roots and filling of hole, cutting/up rooted would be property of the department 7.5 cm to 15 cms girth | 73 | Each | 41 | ₹2,993 |
| 8 | Cutting and uprooting of trees including removing of roots and filling of hole, cutting/up rooted would be property of the department Over 15 cms to 30 cms. girth | 47 | Each | 126 | ₹5,922 |
| 9 | Cutting and uprooting of trees including removing of roots and filling of hole, cutting/up rooted would be property of the department Over30 cms to 45 cms. girth | 28 | Each | 212 | ₹5,936 |
| 10 | Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 150mm NP3 | 80 | RM | 465 | ₹37,200 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.15 MB
MandootiBidDocument.pdf
Tender Documents • 3.13 MB
BOQ_903965.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .