ADDN/ALTN, CERTAIN SANCTIONED B/R AND E/M WORKS AT NARAINA AND BASANT NAGAR UNDER AOR OF GE (AF) FARIDABAD

Amount

Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed .

M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 15mm thick in cement mortar (1:6) on Brickwork or concrete surfaces including finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on of brick work or concrete surfaces, finish even and smooth (w/o using extra cement), mixed with WPC as per user manual at any height etc, complete all as specified and directed. Note:- WPC shall be measured and paid separately

Supply only liquid WPC, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of plastic emultion paint over a coat of 3mm thick wall care putty and obtain smooth finish on newly plastered wall surfaces, complete all as specified and directed.

M & L for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall surfaces over one coat of primer incl one layer of 3mm thick wall care putty on new plastered surfaces and obtain smooth finish using sand paper complete all as specified and directed.

M&L for preparation of new plaster surface and applying two coats of cement based paint over a coat of alkali primer resistance, incl one layer of 3mm thick wall care putty on new plastered surfaces and obtain smooth finish using sand paper, complete all as specified and directed.

M&L for preparation of new plastered surface on walls/ceiling,roof boarder, drops, fins, chajja / roof facia, column surface obtain smooth finish using sand paper and applying two coats of exterior emulsion paint over a coat of acrylic primer as per manufactures instruction, complete all as specified and directed.

M&L for preparation of old surfaces by removal of existing treatment and applying two coats of exterior emulsion paint over a coat of acrylic primer including 3mm thick external wall care putty, complete all as specified and directed.

M&L for preparation of old surfaces by removal of existing treatment and applying two coats of oil emulsion distemper over a coat of primer on surface of walls incl one layer of 3mm thick putty on old scraped surfaces and obtain smooth finish using sand paper, complete all as specified and directed.

M&L for preparation of old surfaces by removal of existing treatment and applying two coats of distemper oil emulsion on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed.

Dismantling floor, hearth or wall tiles including cement mortar, concrete bedding and removing rubbish off the premises complete all as specified and directed.

M&L for 1st quality non skid ceramic coloured tiles, joint free, 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor of shade & designed as approved, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles over & including 15 mm thick screed bed in cement mortar (1:6) in floors etc, complete all as specified and directed. Note:- Shade & design as approved by EIC/GE

M&L for 1st quality Glazed ceramic colour tiles, joint free,in vertical surface of size 350x250x7/ 450x350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with tiles over & including 10mm thick rendering in cement mortar (1:4) as backing for wall tiles such as dado/skirting in vertical surfaces etc, complete all as specified and directted. Note:- Shade & design as approved by EIC/GE

M&L for coloured ultra/double charged/HD Fully Vitrified tiles, 9 to 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 Sqm in floors, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match, over & including 15mm thick screed bed in cement mortar (1:4) for laying floor finishes, complete all as specified and directed. Note:- Shade & design as approved by EIC/GE

M&L for First Quaility fully vitrified coloured tile of 10mm thick (square/Rectangular), polished area of each tiles n.exc 0.36 Sqm as in floor etc sat and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. Note:- Shade & design as approved by EIC/GE

M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like, over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for marble 15-18 mm (green/any colour shade approved by EIC) thick over cement screed bed laid over & including 15 mm thick CM 1:6 and jointed with grey cement slurry mixed with pigment ot match the shade of the slab / staircase / steps,riser incl rubbing and polishing incl rounding to edge of marble, complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge , such as in steps, cooking platform , and other similar situtions, complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F, in repair, for factory made Solid WPC Door frame size ( 100mm X 65mm Single Rebate ) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawings, including all necessary accessories as directed by the Engineer-In-Charge. The door frame shall be Water Proof , Termite Proof, Fire Retardent and having excellent screw holding capacity complete all as specified and directed.

S&F, in repair, factory made 30mm Thick MOLDED WPC with decorative surface 2mm thick Moulded wood grain printed Prelam PVC sheet on front face and 2mm thick PVC sheet on back side, 100% Solid door ( Confirming to IS : 4020 ) made from 100% LEAD FREE single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with Wood Grain Texture and back side palin with density not less than 600 kg/cum. Manufactured by an ISO: 9001-2015 certified company. The door should be Water Proof , Termite Proof , Fire Retardent and having screw holding capacity.Fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws incl Aluminum Jalli and Stainless wiremesh and other accessories as per requirement. Material test certificate and authentication shall compulsory be provided by the manufacturing company, complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed.

S&F Aluminum anodized frame of doors, windows, ventilators powder coating (Min thickness of powder coating 50 micron) with one or more rebate including jointing cleats for fixing etc complete all as specified.

S&F Aluminium anodized powder coated (Min thickness of powder coating 50 micron) window and ventilator shutters, aluminium section weighting not less than 0.55kg/RM incl necessary fixing of 4.8mm thick sheet glass, ordinary quality glass/ frosted, incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts, complete all as specified and directed.

S&F for aluminium Anodized powder coated(Min thickness of powder coating 50 micron) fixed frame of partiton or fixed window / ventilator , aluminium section weighting not less than 0.55kg/RM incl 4.8mm thick sheet glass oridinary quality ' frosted glass or ACP sheet joining with rubber beading , aluminium snap beading complete all as specifed & directed

Easing and Adjusting without taking down, any type Aluminium shutters, etc and refixing in same opening after replacement of defective portions such as wire cloth, beading, handles, hinges, locking arrangements, complete all as specified & as directed. Note : Door closer, door spring, aluminium beading, prelaminated gasket, aluminum beading, prelaminated particle board, sheet glass shall be measured and paid separately under respective item of schedules.

S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples, complete all as specified and directed

S&F in repair 4.8 mm thick ordinary quality' frosted glass and glazing with aluminium beading and gasket to aluminium framework in square exc 0.50 sqm in each pane, complete all as specified and directed.

S&F door closer hydraulically regulated design No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg, complete all as specified and directed

S&F of Neoprene/EPDM Rubber gasket for fixing aluminium door and window shutters etc, complete all as specified and as directed

S&F aluminium beading for fixing of aluminium door and window shutter etc, complete all as specified and directed

S&F 150mm long, aluminium tower bolts, for aluminium door and window shutter etc, complete all as specified and directed.

S&F 125mm long, aluminium handle for aluminium door and window shutter etc, complete all as specified and directed

S&F 150mm long, extruded brass handle, fancy type as approved by GE, polished (ISI marked) for doors , complete all as specified and directed

S&F Brass, tower bolts, with cast or sheet barrel and rolled or cast bolts 150mm long (ISI Marked), complete all as specified and directed.

S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed.

S & F for 30 mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F 125 mm size Hasp and staple, safety type mild steel,wire type,stove enamelled black,including bolt to hinge plate with screws complete all as specified and directed.

S&F for aluminium Fanlight catch with 14mm catch and fixed suitable for any shutters, complete all as specified and directed.

S & F Stainless steel plate rack (bartan stand) made with 4-5 mm dia stainless steel rods of minimum 750mmx250mmx750mm size, complete all as specified and directed by Engineer-in-Charge.

S&F sink with drainage board, made of stainless steel, lmm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm ,including new stainless steel waste coupling and pvc waste pipe etc, complete all as specified and directed.

M & L for preparation of old surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying one coats of synthetic enamel paint (ordinary tint), complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed .

S&F, in repair, one piece closet with bowl for coupled WC with PP soft seat cover, hinges fixing accessories and accessories set of size 360x640x680 mm, 'S' trap 220 mm with syphonic flushing cistern with necessary fittings complete all as specified.

S&F for Vitreous China squatting pan (Orissa pattern) size 580mm X 440mm, white with integral foot rests, any pattern including provision of cement concrete bedding (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

S&F in repair Wash basin 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings complete all as specified and directed.

S&F Wash basin 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings complete all as specified and directed.

S&F in repair Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F 15mm bore bib taps(long body), chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15mm bore bib taps(long body), chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs stop valves/angle valve, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F for CP brass Centre hole mixer without pop up waste system with 450 mm long braided hoses, 20mm cartridge size for mixing hot and cold water screwed down for iron pipe for WHB, in repairs complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore pillar tap,swan neck type, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair for CP telephonic jet with all fitting and fixture for EWCs with 8 mm Dia 1.2mt length long flexible tube, complete all as specified and directed by Engineer-in-Charge.

S&F for 5-7 mm thick looking mirror with magnetic looking arrangements fixed with and inclduling chromium plated brass screws and PVC rawl plugs, complete all as specified and directed.

S&F for vitreous china sensor urinal of size 485x300x740 mm including all necessary fittings etc, complete all as specified and directed.

S&F for 8mm thick, toughend, frosted glass, urinal partitions (size and shape of partition as per the direction of Engineer-in-Charge) , including all necessary stainless steel fitting etc, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Soap tray brass chromium plated and fixed to plugs on wall with brass screws, complete all as specified and directed by Engineer-in-Charge.

S&F for liquid soap container of PTMT fixed with and incl CP brass screws and wooden/plastic cleats, complete all as specified and directed.

S&F for Soap dish, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repair Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed by Engineer-in-Charge.

S&F Towel Rail 600 mm long of PTMT fixed with and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms) complete all as specified and directed.

S&F in repair Towel ring brass chromium plated, fixed with brass screws and plugs, complete all as specified and directed by Engineer-in-Charge.

S&F for PVC connections 45/60cm long superior quality with PTMT nut on both side complete all as specified and directed.

S&F Chromium plated grating, round shape, 100 mm in size, complete all as specified and directed.

S&F in repair, Chromium plated grating, round shape, 100 mm in size, complete all as specified and directed.

S&F in repair for CP towel racks with lower hanger, complete all as specified and directed by Engineer-in-Charge.

S&F tripple layer, 1000 Ltrs capacity, rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top), hoisted and fixed repair in position including 20 mm dia float valve with aluminium fitting, including dismantling old U/S water tank, complete all as specified and directed.

S&F in repair for 20mm dia, gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair for 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixedcomplete all as specified and directed.

S&F for 20mm dia Nipple suitable for HDPE water tank.(Minimum weight 20mm 45gms) complete all as specified and directed.

S&F 20 mm dia Unions brass to connect iron to polyethylene and fixed complete all as specified.

S&F stainless steel pegset of six suitable size of length complete etc, completet all as specified and directed.

M&L for 25mm dia, Decorative/ fancy type, stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC/steel conduit pipes with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

S&F venetian blind for windows including necessary items required for fixing to wall, complete all as specified and directed by Engineer-in-Charge.

S&F for GI tubing 15mm, bore 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in cement mortar (1:3) to facings where required, including taking old U/S 15 mm dia bore GI tubing, complete all as specified and directed.

S&F for GI tubing 15mm, bore 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in cement mortar (1:3) to facings where required, complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete, including taking down old U/S GI tubing all as specified and directed.

S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors incl taking down old pipe, complete all as specifed and dirtected.

S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc incl taking down old pipe, complete all as specifed and dirtected.

S&F for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints,laid in trenches or in floors etc complete incl taking down old pipe, complete all as specifed and dirtected.

S&F for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc complete incl taking down old pipe, complete all as specifed and dirtected.

S&F for 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specifed and dirtected.

S&F 75mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specifed and dirtected.

S& F for 75/100 Cast Iron Cowl complete all as specifed and dirtected.

S&F for 75mm dia of outlet cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specifed and dirtected.

S&F for 100mm dia of outlet cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specifed and dirtected.

S&F Acrylic letters (English/Hindi) 300 mm high, 50 mm width and 3 mm thickness fixed on walls or 3mm ACP sheets board of any description using stainless steel screws of suitable size and best quality adhesive including LED module rain proof lights fittings in each letters, complete all as specified and directed by Engr-in-charge.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet complete all as specified and directed.

M&L for PVC hollow panelling, 5 to 8 mm thick on ceilling with necessary frame work, in Design POP UP pattern and any colour and design approved by Engr-in-charge, inclusive of fixing on to ceiling incl moulding end caps fixed with PVC sleeves and screws as required at site, complete all as specified and directed by Engineer-in-Charge.

S&F for plain gypsum tile 4 to 8 mm thick on ceiling with and incl necessary Anodised Aluminium snap grid frame ‘Tee’ of size not less than 22.50 x 22.5 x 0.5 mm, Angle of size 22.5 x 22.5 x 0.5 mm & FI as per standard engineering practices, complete all as specified and directed by Engineer-in-Charge.

M&L for PVC hollow wall panelling, 7 to 8mm thick, any colour/design approved by Engeer in charge, inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site, complete all as specified and directed

Dismantling of AC/GI sheet (corrugated, semi corrugated etc) of any thickness incl ridges hips valleys as in roof coverings, complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and directed.

S & F of rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters, running rails and guides for sliding doors fixed with angle cleat and other connecting plates confirming to Fe – 410 (Gde E-250 ) Quality ' B' complete all as specified and directed.

All as per item No 101 above but fixing only.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in coping/benching and all other similar works including necessary formwork, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes/tiling work and disposal of debris, complete all as specified and directed.

M & L for 50 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate ) as in plinth protection / path/ any paved area, complete all as specified and directed.

M&L 75mm thick PCC type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base, complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, complete all as specified and directed. Note :- Shape and Colour of interlocking paver block as per EIC/GE

M & L for sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed.

Removing/getting out of excavated material/spoils/debris dumped from site to a distance exceeding 500 m but n exc 1.5 km and depositing where directed at a level n. exc 1.50 m above the starting point, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete etc complete all as specified and directed.

M & L Providing reinforced cement concrete (nominal mix)in slabs supported on walls, beams and columns; in floors, roofs, landings balconies, canopies, deck slabs and in shelves and the like Cement concrete B1 type, 1:2:4 mix (using 20 mm graded stone aggregate), complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 18mm thick water proof solid MDF Board prelaminated both sides of approved shade fitted with necessary arrangement as in kitchen cabinet back sides, partition, shutters and shelves, etc., fixed with solvent cement adhesive and stainless steel screws and providing 1mm thick PVC lipping to exposed edges, complete all as specified and as directed.

S&F for 110mm bore, PVC pipes, single socketed, Pressure rating @4Kg/Sq cm, length, "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete with all fittings, complete all as specified and directed.

All as per item No 120 above but laid in trench or in floor.

S&F for 110mm bore, PVC Gully Trap, setting/jointed with solvent cement, complete all as specified and directed. .

S&F for 110mm bore, PVC bends/junction, any radius, complete all as specified and directed. .

Surface excavation not exc 30 cm deep and averaging 15 Cm deep and getting out in soft/soose soil complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm of broken bricks, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

S & F for 12 mm thick micro perforated ceiling board panel of size 600mmx600mm on ceiling with and incl necessary GI powder coated snap grid frame work for false ceiling Gl frame work for grid ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including hangers 4 mm dia. G.I. (upto1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified & directed.

M&L for point wiring with single core FRLS PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through in PVC conduit, fixed on wall, ceiling with GI saddles GI screws, rawal plugs (concealed conduit wiring) with all fittings including Tee, junction boxes and provision of modular metal flush box of suitable size modular white cover plate with frame for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with stranded coper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and directed.(a) One light point controlled by one switch.

All as per item No 128 above but 5 Amp socket outlet, independent.

All as per item No 128 above but on the same board.

All as per item No 128 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly.

S&F modular white cover plate with frame, 3 module, complete all as specified and directed.

S&F modular white cover plate with frame, 6 module, complete all as specified and directed.

S&F modular white cover plate with frame, 8 module, complete all as specified and directed.

S&F Metal Flush boxes 3 module, complete all as specified and directed.

S&F Metal Flush boxes 6 module, complete all as specified and directed.

S&F Metal Flush boxes 8 module, complete all as specified and directed.

M&L modular switch 1 way 6 A, 1 module, complete all as specified and directed.

M&L modular socket, 6A-2/3 pin combined, 2 module, complete all as specified and directed.

M&L modular Switch 16A, 6 pin, 3 module, complete all as specified and directed.

M&L modular Socket 16A, 6 pin, 3 module, complete all as specified and directed.

S&F modular fan step regulator, 120W -2 module, complete all as specified and directed.

S&F ceiling rose,3 phase/PVC/Polycarbonate,isolated body after dismantling old U/S ceiling rose, complete all as specified and directed.

M&L for Recess mounted 36/ 40 Watt high efficancy 2x2 recess LED flat panel with high brightness LED for glare free homogenous illumination celing light complete with electronic driver complete all as specified and directed.

S&F in replacement wall mounting box type LED tube light fitting , extruded aluminium heat sink provided for efficient heat dissipation & Integrated electronic driver 1x20 watt(4ft) comprising of strong jointless CRCA body complete with all accessories complete all as directed.

M & L for Dismantling of Split type AC 1.5/2.0 TR capacity from position after including disconnecting all connections between indoor and out door units,shifting,backup refrigerant for reuse and install at a place where directed carefully,including cutting on wall,making hole and make good disturbed surface properly matching surface,inspecting, servicing and refilling refrigerant and testing complete all as specified and directed.

S& fixing LED flood light luminarie 70 W with high pressure die cast housing acting as heat sink in order to ensure better performance having IP66 ingress protection all as specified ad as directed at site. Note : All T&P ie ladder,Tools,Safty glooves etc will be provided by the contractor without any extra cost to height upto 25 mtr

S&F in replacement MCB DB SPN 6 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc completed after dismantling old U/S MCB, complete all as specified and directed.

S&F in repairs MCB SP 6 to 32 Amps 240 Volts."B" grade, complete all as specified and directed.

S&F in repairs MCB SPN, 40 to 63 Amps, 240Volts ."B" grade, complete all as specified and directed.

Supply and fix FRESH AIR fan sweep 300 mm in replacement made up of sturdy engineering plastic complete with louvers shutter , voltage 230 V , 50 Hz , 1200 RPM copper wound complete all as specified and directed.

Supply & fixing in replacement of SPN enclosure with two pin and earth plug and socket complete with on SP MCB 25 Amps complete all as specified and directed.

M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including 25mm dia ISI medium grade conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 6 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 6 sqmm cable alongwith one run of 6 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

Taking down ceiling fan of any sweep from existing place and repair/replacement of UNSV items complete all as specified and directed. Note : Spare parts will be measured and paid separately.

M & L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning and scrapping old paint all dust etc,complete all as specified and directed.

S&F in replacement of ceing fan rod for hanging of fan suitable size and length complete all as specified and directed.

S&F in replacement of ball bearing for fans of various size complete all as specified and directed.

S & F stop valves/angle valve, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15mm dia CP brass mixer for hot & cold water, screwed down for iron pipe and fixed complete all as specified and directed.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 2.5 Sqmm (for Phase colour Red and for Neutral colour code Black) and one run of size 2.5 Sqmm PVC insulated unsheathed multi stranded conductor (FRLS) ( as earth wore, colour code green) and connected to common earth dolly, drawn through in surface PVC casing caping ISI marked 20mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet for provision of switches/regulators complete all as specified and directed.

S&F sheet metal single pole and neutral enclosure with a two pint earth plug and socket complete with one single pole MCB 20 Amps, 240 V complete all as specified and directed.

S&F storage water heater (Geyser) 25 ltr capacity 5 Star rating complete with water pipe line connection incl cutting the existing pipe complete all as specified and directed. Note : PVC connection 02 Nos (for hot & cold water inlet and outlet) upto 1mtr length of each included in the unit quoted rate.

M/S PRADEEP ENTERPRISES (BID ID -3262609)

M/S GEETANJALI ENTERPRISES (BID ID -3262213)

Singh Associates (BID ID -3261891)