CA NO GE(H)-35/2024-25 REPAIR TO FENCING, DRAIN, FOOTHPATH, IN OTM ACCN IN THE AOR OF AGE B/R-I UNDER GE HISAR MIL STN

Amount

Dismantling galvanized steel barbed wire of any description fixed to any type of fencing posts. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.

Dismantling fencing wire mesh of any type of any description fixed to any type of fencing posts.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion embedded in concrete, brick work, masonry etc. and making good disturbed ground all as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for in this Schedule all as specified & directed.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) where required as per site requirement and other similar works complete, conforming to Gde E-165 (Fe 290).

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete.

Supply and Fixing mild steel galvanized chain link fencing any size or type as directed complete all as specified. Note:- 1. Weight per Kg of chain link fencing shall be ascertained by convening BOO ordered by Accepting Officer, 2. Flat iron, round bars, nut bolts and washer shall be measured and paid for separately under respective items.

M&L for mild steel round bars of 10 mm dia and over conforming to Grade E-165 (Fe 290) as similar works including necessary cutting etc and fixing in position with angle iron post complete all as specified & directed.

S&F mild steel work as in flat iron ties fixed to posts including dilling holes for fixing bolts, hold fasts etc and similar items complete conferming to Gde E-165 (Fe 290) complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long and dia of neck not less than 10mm complete all as specified.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

Demolition of cement concrete (un-reinforced) paving not exc 15 cm thickness ( above ground floor.) & removing unserviceable materials in low laying area, complete, all as directed.

Demolition of brick/stone masonry built in cement/lime mortar of any mix and stacking serviceable stones aside for reuse & removing unserviceable materials in low laying area, complete, all as directed.

M & L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rough cast finish plaster by applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even complete .

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint on walls over a coat of primer all as specified & as directed.

M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified.

M&L brick work with subclass 'B' old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified.

M&L for factory made 60mm thick machine pressed precast cement concrete coloured interlocking paver blocks glossy finish of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete, all as directed.

M&L for PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in levelling course 25mm thick finished fair & even complete all as specified & as directed.

M&L for factory made vibrate type chequered cement concrete coloured tiles, glossy finish, 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement & pigment, laid over & including 20mm thick screed bed in cement & sand mortar 1:4, complete, all as specified & as directed.

M&L for 75mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified.

M&L flush pointing to brick walls in cement mortar 1:4 all as specified.

M&L for PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in hold fasts, bed blocks & like including necessary formwork complete all as specified and directed..

M/S KAVITA CONSTRUCTION (BID ID -3105374)

DHARMA CONSTRUCTION (BID ID -3107535)

S K BUILDERS (BID ID -3106470)

VERMA BROTHERS (BID ID -3119252)