COMPREHENSIVE MAINTENANCE OF LIFT AND REPAIR/ MAINT OF EOT CRANE, MOTORISED GATE AT AF STN NAL

M&L for servicing of flame proof EOT Crane capacity 3 ton of (WSA-III) by the following method as follows : (a) Replacement of gear oil in gear boxes . (b) Grease the whole crane (c) Before filling the gear boxes clean the gear box inside and outside by using diesel (d) Checking the wheel condition (e) If thruster breaks are used check the level of oil in it and if required to be refilled , refill the same (f) Check the working of the break if required to change then change the same (g) Checking the connection of motors (h) Checking the condition of motor if required if required to rewind ,n rewind the same (i) Checking the condition of couplings if required to be change then change the same (k) Check the nuts & bolts fitted on the crane , if required to be change then change the same (l) Check the condition of the power cables fitted on the crane , if required to be change then change the same . (m) Check the break shoe fitted on the break of the crane , if required then change the same (n) Check the limit switch fitted on the crane , if required then replace the same .

(o) Check the step down transformer , single phase preventer , terminal block , MCB , HRC and DBR , if required to be change then change the same . (p) If VFD installed , check the same and if required then replace the same (q) Check the pendant , if element and push button required to be change then replace the same . Note : (i) All unserviceable spare parts to be replaced shall be measured and paid separately under relevant item of Sch A. (ii) Cost of Grease & Oil shall be deemed included in unit quoted rate. (iii) Servicing of crane shall be carried out through OEM only . Contractor shall have to submit the MoU with the concerned OEM for maintenance of crane before the issue of work order . (iv) After servicing, OEM has to submit the serviceability certificate and warranty for the replaced items for one year from the date of servicing .

All as per ser item no 1.0 above here in before but for 3.0 ton capacity flame proof EOT crane .for WSA -II,URP,MPS,IGLOO

All as per description of item No. 1.0 above here in before but HOT Crane, 3 TON Capacity ,for WSA -II

All as per description of item No. 1.0 above here in before but EOT Crane, 10 TON Capacity ,for GAHGAR

Load testing of flame proof EOT Crane 3 TON for WSA-III Capacity of any make and model, comprising two number tests for each crane i.e. Capacity test and Brake Test as per IS : 3177 of 197 by putting the requisite load, writing date of test and next due date for testing on the crane with white synthetic enamel paint over a black strip of synthetic enamel paint complete all as directed . Note:- (i) M & L for Load for testing shall be arranged by the contractor at his own and the rate of this item include the cost thereof. (ii) Testing of particular crane shall be scheduled by Engineer-in-Charge (iii) Load testing and calibration of EOT crane carried out in the presence of competent person under factories act 1963 and rep of OEM and after completion of load testing contractor will produced the Form 11 duly signed by competent person under factories Act 1963.

All as per ser item no 5.00 above but for Make : Endurance 3.0 ton capacity flame proof EOT crane for WSA -II,URP,MPS,IGLOO

All as per description of item No. 5.00 above here in before but HOT Crane, 3 TON Capacity for WSA-II

All as per description of item No. 5.00 above here in before but EOT Crane, 10 TON Capacity ,for GAHGAR

Supply only following Spares / Components for existing flame proof EOT crane 3 TON capacity complete all as specified and directed:-