Supply, delivery of Standby PDB Cum MCC Panel and Submersible pumping machinery under Rejuvination of Tapshikhata water supply scheme under NMD-II,PHE Dte.

Amount

Supply and delivery at site of the following submersible pumping machinery and electrical accessories:

Submersible pumping machinery directly coupled with water proof suitable size motor having following specification and as per NIT specification : Pump Duty condition-11 m3/Hr Head- 31 Mtr Shaft-stainless steel Impeller- S.S/ GM Outlet Size: 80 mm. Motor submersible type 3 Ph , 50Hz, 415 Volt± 10% 2900 RPM Motor must be suitable for operation with DOL starter. Test certificate along with characteristic curve should be submitted at the time of delivery

1.1 KV grade 1.5 sq.mm x 3 Core water proof flat submersible cable for above motor

Supply, delivery and installation of Floor mounted, 415 Volt,2 mm thick epoxy painted sheet steel enclosed front open fully manually control PDB Cum MCC Panel having Out going feeder, motor control centre for operation of the pump motor in DOL mode ranging for 3 HP, and timer operated outdoor and indoor lighting as per approved drawing and NIT specification :

Supply and delivery of the following valves, pipes and gauges etc at site:

3 mtr long 50 mm dia UPVC standard type column pipe [cream color) with both side threaded and one end side socketed with registered KPMG

1.5 mtr long 50 mm dia UPVC standard type column pipe [cream color) with both side threaded and one end si de socketed with registered KPMG

50 mm dia Cl top & bottom adopter

50 mm dia CIDF sluice valve-1 no., Non Return Valve-1 no., CIDF 90° bend-1 no., Cl flanged tee-lno. blank flange-1 no., Cl/ MS flanged short piece 0.50 mtr.-1 no, Cl/ MS flanged pipe 1 mtr. 1 no. etc as per IS specification and certification for Construction of delivery pipe line and wash out line.

Heavy type 200 mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry with 2 sets heavy type suspension clump, nuts, bolts and washer as per departmental design.

5O mm. dia. non metalic pipes (IS:14930) and specials for protection of submersible cable

N.B.:MAKE: AS PER PHE APPROVED VENDOR LIST AND ADDENDUM/CORRIGENDUM (IF ANY)

Add GST @18%

SUMON ELECTRICAL

B B CONCERNED