REPAIR AND PAINTING TO STEEL FURNITURE UNDER GE 865 EWS

Amount

REPAIR TO ALMIRAH LARGE STEEL/ALMIRAH 1/2 HANGING 1/2 SHELF FD-67M , FD- 1031 & FD-1033

Removing of old unserviceable 3 way locking device complete of Almirah Large steel and S&F new 3 way locking device made to shape as required and all as specified in drg and directed by Engr-in-charge.

Removing of existing old locks of Almirah Large steel and S&F new locks of 5 lever with duplicate keys and fixing in proper functional position as original shape all as specified and directed by Engr-in-charge (Make : RAINA/REENA/BAJRANG)

Removing of existing old unserviceable handles including necessary nut, bolts, washer etc of Almirah large steel and S&F new chromium plated handles including necessary nut, bolts, washer etc all as specified & directed by Engr- in- Charge.

Taking out existing shelves and refixing in position including necessary nuts, bolts, washers, clips etc for Almirah large steel all as directed by Engineer-in-charge.

Removing of old unserviceable legs of Almirah large steel and S&F new legs made out of 1mm thick MS sheet made to shape and providing two coat of olive green or silver grey paint over a coat of red oxide primer, all as shown on drawing and directed by Engineer-in-charge.

Removing of existing old unserviceable shelves of Almirah large steel and S&F new shelves made of 1mm thick MS Sheet made to shape by using suitable nuts & bolts and fixing clips and providing two coat of olive green or silver grey paint over a coat of red oxide primer, all as specified in drg and directed by Engr-in-charge.

REPAIR TO ALMIRAH MEDIUM STEEL (FD-1032 & FD-243)

All as per Srl item No 1.01 here-in-before but Almirah Medium Steel

All as per Srl item No 1.02 here-in-before but Almirah Medium Steel

All as per Srl item No 1.03 here-in-before but Almirah Medium Steel

All as per Srl item No 1.04 here-in-before but Almirah Medium Steel

All as per Srl item No 1.05 here-in-before but Almirah Medium Steel

All as per Srl item No 1.06 here-in-before but Almirah Medium Steel

BOOK CASE STEEL / BOOK CASE OPEN LARGE (FD-1028&FD-69)

Taking out unserviceable handle and S&F of new chromium plated casted handle of same size as directed by Engr-in-charge.

Taking out unserviceable locks and S&F new brass lock of approved quality as per Godrej pattern as directed.

Opening of shelves and cleats and denting of de-shaped portion welding as required and refixing in same position as directed by Engr-in-charge.

Removing of unserviceable/broken glass and S&F new glass 3 mm thick of existing shape and size as shown on drawing and directed by Engr-in-Charge. Make : Modiguard/Atul/Swastik.

Removing of existing old unserviceable shelves of Book Case Steel Open Large and S&F new shelves made of 1mm thick MS Sheet made to shape by using suitable nuts & bolts and fixing clips and providing two coat of olive green or silver grey paint over a coat of red oxide primer, all as specified in drg and directed by Engr-in-charge.

CONVERSION OF GI CHARPOY NYLON NEWAR INTO CHARPOY GI PIPE PLY WOOD TOP (FD-220)

Removing of unserviceable nylon newar and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked make Kit Ply/Green Ply/Duro and fixing same with two nos of flat iron strip of size 900x32x5mm, bolts nuts and washers bolts of size 5x65mm 12 nos round head bolts after dirlling the three holes of each long rail and drilling two hole on each short rail and two hole in flat iron complete all as directed including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing complete all as per specified and as direction by Engr-in-charge.

Removing of unserviceable elbow of charpoi GI pipe and s&f three way GI elbow 32mm medium grade ISI marked complete all as specified and directed by Engr-in-charge.

Removing of unserviceable check nut of GI Charpoy and s&f new check nut 32mm bore 10mm thick suitabkle for charpoi GI pipe 32mm bore complete all as specified & directed.

M&L for removing the threadless/broken long rails from chairpoy GI pipe 32mm and S & F new long rail of 32mm dia GI pipe medium grade 1.88 mm long threaded at both ends and fixed to existing three way elbow 32mm dia and all shown on drawing Make : TATA/Jindal

Taking out existing old broken long rail from chairpoy GI 32 mm dia and providing in position 1 nos short rails made out of broken long rail obtained from taking down above item No 8(d) including threading on both ends complete fixing all as specified and shown on drg (Note : U/S check nuts to be replaced in above item and measured and paid as supply only under relevant items.

Taking out existing old broken legs from chairpoy GI 32mm dia and providing 01 No new legs in position made out of old broken short rail obtained from taking down above item No 8(e) and S & F 3mm thick and 40 mm dia MS plate welded at bottom of leg and two Nos MS clamp made out of 25x3mm size FI welded legs including threading on top and painting of clamp with two coat of synthetic enamel paint over a coat of oxide primer and complete all as specified and directed by Engineer-in-Charge

Taking out existing old broken legs from chairpoy GI 32mm dia and S&F new legs made out of 32 mm dia GI pipe medium grade including 3mm thickx40mm ms plate welded and bottom of legs and 02 Nos ms clamp made out of 25x3mm size Fi welded legs and threading on top end and painting of clamp with two coat of SE paint over a coat of oxide primer and complete all as specified and directed by Enginer-in-Charge

Opening of joints of GI Chairpoy of 32 mm pipe where repaired and reassembleing incl provision at bottom of legs shall be plugged with 3mm thick mild steel sheet welded to bottom of legs and hard wood plugs shall not be provided.

REPAIR TO LOCKER STEEL (FD-257 & FD-1029)

Removing of old broken/ unserviceable conduit pipe and S&F new conduit pipe of size 20mm dia and 1.6 mm thick with appropriate bracket of steel made to shape as shown on drawing and directed by Engineer-in-charge.

Removing of old deshaped/broken Steel shelf and S&F new MS Steel shelf of 1 mm thick MS Sheet and fixing it in proper functional position as original shape by using suitable rivets and fixing cleats by providing two coats of OG paint over a coat of primer all as specified and directed by Engr-in-charge.

Removing of old broken/ unserviceable existing hasp & staples, handle of Locker steel and S&F new Hasp & Staples of size 75x30x2mm, handle mild steel chromium plated made to shape all as shown on drawing and directed by Engineer-in-charge.

Removing of old unserviceable legs of Locker steel and S&F new legs made out of 1mm thick MS sheet made to shape and providing two coat of OG paint over a coat of red oxide primer, all as shown on drawing and directed by Engineer-in-charge.

REPAIR TO RACK STEEL SIX/SEVEN SHELVES(FD-129 & FD-1038)

Removing existing unseviceable shelves of rack steel and S&F new shelves of 1mm thick MS sheet of required size and shape all as specified and directed by Engr - in- Charge.

Removing existing unseviceable angle iron of rack steel and S&F new angle iron 40x40x4mm thick of required size and shape all as specified and directed by Engr - in- Charge.

REPAIR TO TABLE STEEL 900 x 600 x 760 MM WITH DRAWER/WITHOUT DRAWER (FD-1008)

Taking down old U/S top of table steel 900 X 600 X 760 mm with drawer and S&F new top of table steel 900 x 600 x 760 mm made of 18/19 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge.

Taking down old U/S drawer and S&F new drawer made of 1mm thick MS Sheet as specified and shown on Drg and directed by Engr-in-Charge.

Removing existing unserviceable parts of table 900 x 600x760mm Steel (with drawer) and S&F new parts made of square pipe of 25mm x 25mm and 1.6 mm thickness by running welding all as specified and directed by Engr-in-charge.

Description all as per item No.6 (a) here in before but replacement of rubber shoe with S&F new rubber shoe of superior quality with suitable size complete all as directed by Engr-inCharge.

REPAIR TO TABLE STEEL 900 X 900 X 760 MM (FD-1009)

Removing of U/S top and S & F new top 18/19mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side white make Novapan/Bhutan Board/ Kitply/Decco / Mysore with 4 mm thickT.W. beading all-round the table steel 900x900x760mm

Removing existing unserviceable parts of table 900 x 900x760mm Steel and S&F new parts made of square pipe of 25mm x 25mm and 1.6 mm thickness by running welding all as specified and directed by Engr-in-charge.

Description all as per item No.7 (a) here in before but replacement of rubber shoe with S&F new rubber shoe of superior quality with suitable size complete all as directed by Engr-in Charge.

TABEL OFFICE OFFICERS STEEL (FD-1003 / 84 (M))

Taking out U/S Top from Table office offrs steel and S&F new top of size 1800x1200mm 18/19 mm pre-laminated partical board exterior grade Make-Novapan/kitlam/Archid ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on drg and as directed by Engr-in-charge.

(b) Taking out unserviceable locks and S&F new brass lock afterr repairing of drawer and cupboard of Table Office Officers Steel size and shape as per approved quality as shown on Drg and directed by Engr-in-Charge

TABEL OFFICE CLERK STEEL(FD-1004)

Taking out U/S Top from Table office clerk steel and S&F new top of size 1200x900mm 18/19 mm pre-laminated partical board exterior grade Make- Novapan/kitlam/Archid ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on drg and as directed by Engr-in-charge.

Taking out unserviceable locks and S&F new brass locks after repairing of drawer and cupboard of table office clerk steel size and shape as per Drg as directed by Engr-in Charge.

Taking out old U/S drawer and S&F new drawer made of 1mm thick MS Sheet as specified and shown on Drg and directed by Engr-in-Charge.

REPAIR TO CHAIR TUBULAR STEEL WIITH / WITH OUT ARMS FD-75(M)

Removing unserviceable seats from steel chair with & w/o Arms and S&F 32mm thick Ist class HW seasoned sheesham wood seat as per existing size and shape fixed with suitable bolts, nuts and washer including polishing and recanning with polythene white cane half round as per IS-5378 -1968 1.2 to 2mm wide and .3mm thick for seats and 3 to 3.2mm wide & 0..4mm thick border including supply of cane complete all as directed by Engr-in-Charge.

All as per item No 11.01 above, but steel chair back -do-

Taking out US arms rest from steel chair with arms and supply and fixing chair arms rest with suitable bolts, nuts and washer

S&F in repair hard rubber shoe black 20mm dia suitable for bottom of steel chair

S&F in repair hard rubber cap black suitable for 20mm dia at top of steel chair complete.

REPAIR TO TABLE DINING OR ALUMINIUM TOP (FD- 165M)

Removing existing unserviceable top of table dining ORs and providing new top of size 1920 x 680mm made out of 18/19mm thick commercial ply wood duly covered with 24 gauge aluminium sheet,12 Nos screws wood steel CSK of sizes 40mm shall be used for fixing the table top all as shown in drg and as directed by Engineer-in-charge.

REPAIR TO CHAIR REVOLVING/ COMPUTER/EXECUTIVE GODREJ PATTERN TP (FD/E6/MAP/01)

Dismantling and re-assembling with new components of the following unserviceable part/components of chair revolving steel all as specified and directed by EIC of the following :- Hydraulic system complete set

Chair leg wheel

Side Arm PVC complete

Foam seat back complete with superior grade of tapestry cloth cover

Foam seat bottom complete with superior grade of tapestry cloth cover

PVC Base with complete set

Iron Base plate with complete set

Iseat tilting mechanism complete set

CHAIR WRITING STEEL (FD-360)

Removing of old raxine cloth S&F of new rexine cloth to both seat and back (upholstery) of existing cushion not less than Rs 300/- per mtr approved by Engr-in-charge

Removing of old unserviceable foam cushion from chiar writing steel and S&F new foam cushion of size 75mm x 50mm of 28 density for seat and back respectively make Godrej / SLEEPWELL fixed over wooden frame covered with rexine cloth not less than Rs 300/- per mtr as approved by Engr-in-charge and rest all as per drg .

REPAIR TO TABLE BED SIDE STEEL 133(M)

Removing existing unserviceable shutter from table bed side steel and S&F new shutter made to required size and shape of 1mm thick MS sheet all as specifed and directed by Engr-in charge.

Removing existing unserviceable top from table bed side steel and S&F new top of size 600x380mm made of prelaminated particle board 18mm thick white (exterior grade) with teak wood beading 4mm thick all around the top as specified and directed by Engr-in-charge.

REPAIR TO CHAIR VARANDAH (FD-256)

Removing existing unserviceable plastic cane of chair Varandah and recaning in mat pattern as per drg including handle bars complete in all respect with 4/5 mm wide 0.4 mm thick partially rounded plastic cane, white colour of Shah Brand all as specified and shown in drg.

REPAIR TO TABLE BED SIDE STEEL 133(M)

Removing existing unserviceable shutter from table bed side steel and S&F new shutte made to required size and shape of 1mm thick MS sheet all as specifed and directed by Engr-in charge.

Removing existing unserviceable top from table bed side steel and S&F new top of size 600x380mm made of prelaminated particle board 18mm thick white (exterior grade) with teak wood beading 4mm thick alround the top all as specified and directed by Engr-in-charge.

COUCH EXAMINATION 122(M)

Removing of old userviceable planks and S&F of new planks of seaoned wood planks as directed and as per drg

Revmoving of old unserviceable foam and S&F new foam 25mm density make Godrej / Sleepwell all as directed and as per drg

Removing of old unserviceable rexine cloth and S&F of new rexine cloth of best quality not less than 300/- per mtr as approved by Engr-in-charge and as per drg.

M&L for scrubbing and derusting, denting of de-shaped portion and applying one coat of primer and over it two coat of synthetic enamel paint (spray painting) incl preparation of surface all as directed by EIC for the following :-

Table office clerk steel

Table Office officers steel

Rack side 3/4 space steel with tray

Teapoy varandah

Steel rack 6 / 7 tier

Table 900X600 steel with drawer

Chair Writing steel with cushion

Table steel 900X900mm

Chair CB steel with or without arms

Almirah large steel with shelves

Almirah med steel with shelves

Book case steel

Filling cabinet steel

Locker steel

Table Writing Steel

Chair Varandah

Table Bed Side Steel

Couch Examination

R B TRADERS

M/S SUMEET TRADING CORP

ASHOK KUMAR SHARMA

SHARMA AND SONS CONSTRUCTION CO

M/S GLOBAL ENGINEERS

M/S DIXON ENGINEERING

M/s Koul & Sons