For Shifting of pole and HT and LT line at Faizabad road from Daliganj churaha to Balaji sweet under sub division Ekka stand and shifting of pole from shani Mandir to IT chauraha under sub division University against Deposit head in the area of EUDD

Amount

Safe Loading, carriage & unloading of following material from Central store and JE store to site of work.

ST Pole 9/11 Mtr long

11KV XLPE Cable 3x70/185sqmm

A B Conductor 3x120sqmm

LT Cable 1x630/3.5x630/240sqmm

11KV C /J KIT 3X70/185 O/D/S/T

Pole mounted DP Box

Line Material

Fabrication erection of substation type double pole on 11Mtr ST Pole along with fixing of necessary clamp, accessories required of MS channel on top dropper with arrangement of fixing of 11KV Pin/Insulator as per respo specification ,grouting in 1:4:8cement sand,brick ballast and making plinth 300mm above ground level Angle, channels, Pin ,Pin Insulator and ST Pole provide by Department, Rest all material provide by contractor.

Erection of Double pole on 11 Mtr ST Pole along with fixing of 11KV Expososr line acessories grouting plinting of pole. Angle ,channels,Pin ,Pin Insulator and ST Pole provide by Department

Erection of Single pole on 11 Mtr ST Pole along with fixing of 11KV Exposer/LT Line line accessories grouting plinting of pole. Angle, channels, Pin ,Pin Insulator and ST Pole provide by Department

Erretion of Single pole on 9 Mtr ST Pole along with fixing of LT line 3Phase 4 wire line/AB conductor line aessories grouting plinthing of pole.All accessories provide by contractor exept ST pole and conductor

Pipe type earthing with 20 mtr deep boring and providing jindal make pipe "B" class 1" dia and GI strip 25x5 6mtr long attached with clamps and GI pipe. All accessories provide by contractor

Grouting, Binding nozzelling of stay set complete. Stay Rod and wire Provide by Department

Earthing of pole by MS Eathing Rod .MS Earthing Rod provide by Department

Prepare proper space for construction of plinth

Construction of T/F plinth of size 2x2x1.5 Mtr with first class bricks and masonry work in the ratio 1:4cement and course sand with RCC Top 1:2:2 cement sand and course sand stone gritt with MS bar and MS channel for resting of T/F

Rectanguler wiremesh fencing of 11/0.4KV S/S made as per requirement 2mtr height 45x45x5 mm angle frame and 1 No horizontal runner by 40x5 mm MS flat then welding of wiremesh on it 50x25mm made of 12 SWG ,diagonal bracing of all the frame panel welded with MS flat 25x3mm support,groutin properly by cement concrete and course sand.All material provided by Contractor

Dismantling and Reinstallation & commissioning of 11/0.4 KV400KVA T/F including its connection from 11 KV line and LT line mounting of copper L-Piece providing and fixing of Al crimping Lugs ,all material provide by department except nut bolt and copper L-Piece

Grouting of masonry type DP Box with First first class brick ballast,course sand ,cement and MS Bar local sand with Henley type fuse unit and 4 Nos copper bus bar, all material arrange by contractor

Laying of 11KV XLPE Cable 3x185 sqmm cable Double Circuit by digging of pit upto 900mm deep x 450mm width boxing with 1st Class Brick and sand covering with Ist class Bricks refilling of earth and proper ramming

Hoisting of cable providing GI Pipe pole clamp and proper jumpering of Cable Tapping of all joints

High pressure testing of 11KV XLPE cable 3x70/ 185sqmm

Erection of AB conductor

Laying of LT Cable with suitable size of lug, Cable provided by department. Rest all material provide by Contractor

Erection of Pole mounted LT DP Box by the help of pole clamp,connect with main line by suitable size of connectors Box provide by Department Rest all material provide by Contractor

Dismantling and reconnection of consumer connection

Dismantling of 11KV/LT Line rolling of conductor and its carriage upto JE Dump store /central Store

Dismantling of all the Fitting from single pole and its carriage back to JE Dump store /central store

Dismantling of LT Line bare conductor /AB Conductor line rolling of conductor ABC and its carriage back to JE Dump store /central store

Dismantling of all the Fitting from Double pole and its carriage back to JE Dump store /central store

Dismantling of all the Fitting from Four pole and its carriage back to JE Dump store /central store

Dismantling of Rail/RS Joist/ST/PCC pole and its carriage back to JE Dump store /central store

Painting of poles by 2 coat of red oxide and 2 coat of Aluminum Enamel paint.

Dismantling of masonry Plinth after Removing of Transformer

Cutting of tree Branches which are require for clearance of line

Erection of PVC on Pole mounted Distribution box

POWER CONTROL AND SWITCHGEARS

M/S AARADHYA AND ADHYATM ASSOCIATES