SUPPLY OF HARDWARE FOR CATTLE FEED MACHINERY

SUPER SENIOR PELLET MILL

Bearing cover front Forged Steel

Bearing cover Rear Forged Steel

Bearing setting ring Forged Steel

Counter shaft Assembly with pulley without Belt Without bearing & pedestal

Die cover Ring Forged Steel

Die Holder (Steel) Forged Forged Steel

Die Holder Assembly Forged Steel

Die Holder Rind Rear Suitable for above Alloy Steel

Die Holder Ring Front Forged Steel

Feeder Conditioner S. S. Knife S.S. 304, thread 1/2" bolt per piece

Feeder Conditioner Screw and paddle type Feeder conditioner body S.S. Approx. 1430 MM long S.S. -304 Construction arrangement of singledrive feeding end.

Front Bearing spacer for 'T’ shaft

Front scraper (roll stay assembly) Forged Steel with clamping stay

Front Scraper blades for Pellet Mill

Pellet cooler Air lock Height 450 MM/width 250 MM Inlet/outlet 155 MM

Pellet cooler Eccentric Assembly

Pellet cooler Sensor

Pellet Die Size:520 Dia inner X 635 outer X 23.0 wider Pellet :10/8 mm Hole Perforation Fixing – 12-M 20 x 25 deep on 565 PCD Mounting: Tapper collar 12 deg on 620.6 Dia or straight plug dia 610 Dia Material: EN 19c or 42crMo4 Duly hardened & temp. Polished, rc4=5

Pulley Assembly (fly wheel) 11 groove Forged Steel

Rear Scraper Forged Steel

Roll Holder shaft (T shaft) assembly Forged Steel

Shearing Pin

Helical Gear with Hub One set containing 2 numbers

Helical Gear without Hub One set containing 2 numbers

Pellet Mill Sieve

Screw for variable speed feeder conditioner for Pellet Mill

Shear Pin Holding Body

Shear Pun Bush

Spring Set

Teflon Bush for Main T shaft

Pallet Down Spout

PRESS ROLL ASSEMBLY SUPER SENIOR

Bearing cover

Bearing Retainer/Nut for eccentric shaft KM- 20

Center Bolt/Roller Stud (Allen, Bolt, head Type design)

Circlip (Dia 180 inside)

Clamping Device Tension ring (90x101x17) mm

Distance Ring

Eccentric Shaft

Lock nut with lock washer for press roll eccentric shaft

Lock Washer (MB-20)

Nut for Center Bolt (lighting Ring)

Press Roll assembly Complete with Shell, Bearing etc. Suitable for above EN-24 Shell

Press Roll Shell

Setting Ring

Spacer (Sealing Ring)

MOLASSES MIXER

Molasses Cutting Knife with nut Suitable for above NI, Hard duly balanced

Paddle plane and loop type Suitable for above NI, Hard duly balanced

Spray Pipe nozzle with nipple 1.5 inch C class pipe, 3/8 inch nipple

FULL CIRCLE HAMMER MILL

Beater (Flat type) all equal weight (Big size 180 mm x 50 mm x10 mm) NI hard,Dynamically Balanced

Beater (Flat type) all equal weight (Small size 140 mm x 47 mm x 06 mm)

Beater Holder shaft EN, Material

Beater Holding Bush (Size Length 30 mm, In Dia 20 mm, Outer Dia 30 mm)

Beater Holding Bush (Size Length 60 mm, In Dia 20 mm, Outer Dia 30 mm)

Beater Holding Bush (Size Length 36 mm, In Dia 20 mm, Outer Dia 30 mm)

Beater Holding Bush (Size Length 53 mm, In Dia 20 mm, Outer Dia 30 mm)

Carryingrod for hammer mill 2 No of each set

Door Closing clamp set

Hammer Mill Feeder

Permanent Magnet

Sieve Set 3 mm, Thick MS sheet with 3 mm, 2mm, 4mm, 5mm and 6mm perforations

Sieve Set Clamping frame

SCREW CONVEYOR

Gravity pipe clamping 8 inch dia.

Gravity pipe clamping for above pipe 8 inch Dia, 16 gauge.

Gravity pipe M.S. 8 inchDia, 16 gauge, 1 meter long

Gravity pipe S.S. 8 inch dia. 14guage 1 mtr. Long.

Pazama flap 3 way for distribution Suitable for 8 inch pipe

Screw of different sizes

Shaft suitable for joining the screwconveyor

CHAIN CONVEYOR

Raddler chain matching our existing chain conveyor. Chain should 10mm thick links along with bushes and roller duly hardened

Chain Supporter with Single Bearing Nylon roller with shaft and bearing 1 no., Lock Ring, Shaft 255mm long

Chain supporter with Double Bearing Nylon roller with shaft and bearing 2 no., Lock Ring, Shaft 255 mm long

Chain supporter (3 piece Bush) Nylon roller without bearing, Shaft 310 mm with nut and washer, 94.5 Bush 2 no., 60 mm long Bush 1 no.

Slat-Conveyor

Chain suitable for slat conveyor matching to our existing slat conveyors. Chain links should 6 mm thick along with bushes and roller dully hardened

Metal Slates

CHAIN SPROCKET

1" Simplex 11 Teeth, (Bore different size, keyway 1/2", 2 nos. with thread, Bose 65mm)

1" Simplex 15 Teeth (Bore different size, keyway 1/2", 2 nos. with thread, Bose 65mm)

1" Simplex 16 Teeth (Bore different size, keyway 1/2", 2 nos. with thread, Bose 65mm)

1" Simplex 17 Teeth (Bore different size, keyway 1/2", 2 nos. with thread, Bose 65mm)

1" Simplex 22 Teeth (Bore different size, keyway 1/2", 2 nos. with thread, Bose 65mm)

1" Simplex 32 Teeth (Bore different size, keyway 1/2", 2 nos. with thread, Bose 65mm)

1" Simplex 42 Teeth (Bore different size, keyway 1/2", 2 nos. with thread, Bose 65mm)

1" Duplex 45 Teeth (Bore different size, keyway 1/2", 2 nos. with thread, Bose 65mm)

1" Duplex 17 Teeth (Bore different size, keyway 1/2", 2 nos. with thread, Bose 65mm)

1" Simplex 19 Teeth (Bore different size, keyway 1/2", 2 nos. with thread, Bose 65mm)

PINIONS & WHEELS

1ST Pinion 4380

1ST Pinion 4382-D

1ST Pinion 4419

1ST Pinion 4601

1ST Pinion 4220

1st Pinion 4295

1st Pinion 4418

1st Pinion 7530

1ST Wheel 724

1ST Wheel 345

1ST Wheel 1150

1ST Wheel 797

1ST Wheel 215

1st Wheel 2336

1st Wheel 704

2ND Pinion 365

2ND Pinion 833-C

2ND Pinion 621

2ND Pinion 3388

2ND Pinion 4229

2nd Pinion 181

2ND Wheel 366

2ND Wheel 182-D

2ND Wheel 619

2ND Wheel 3386

2ND Wheel 4418

3RD Pinion 179

3RD Pinion 3319

3RD Wheel 3377

Gear Wheel 545

Gear Wheel 729

Pinion 4343

Pinion 4347

Pinion Wheel 544

Pinion Wheel 431

Wheel 180

Wheel 253

Wheel 3371

Wheel 694

1ST Pinion 4237

1ST Pinion 4748

1ST Wheel 259

1ST Wheel 9036

2ND Pinion 352

2ND Pinion 631

2ND Pinion 574

2ND Pinion 572

2ND Pinion 573

2ND Wheel 353

2ND Wheel 571

3RD Pinion 3379

Pinion 4386

Pinion 642

ELEVATORS

Elevator Belt M-24 Rubber-300 mm 4 ply (polyester) 3mm top 1.5 mm bottom

Elevator Belt M-24 Rubber-250 mm 3 ply (polyester) 3mm top 1.5 mm bottom

Seam less Buckets 10” size -10”× 6”× 5” gauge 18 Hole 3/6” 3 Nos.

Seam less Buckets 8” size -8”× 5- ½ × 4-½” gauge 18 Hole 1/8” 2 Nos.

Trumatic Engineers

Hindustan Equipments Pvt Ltd

Bidder Name

Hindustan Equipments Pvt Ltd