Work 52 Repair and painting work in the park in front of R 02 48 in Ward 84 Rajnagar Sector 02.

Colour washing one coat using approved. Colouring material like Geru in red shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet).

Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the engineer-in-charge within a distance of 60 metre ( 200 feet) (AS PER PWD SOR 2022 PAGE NO 47 SI NO

S/L P:CC (1:6:12) with 40 mm gauge brick ballast fine sand of 1.25 f.m and cement in foundation and under floor including all materials, labour, tools, & plant etc all 4 completed as per the direction of engineer-in-charge. 2 AS PER PWD SOR 2022 PAGE NO 18 SI NO 5.01 ITEM NO 273}

First class Brick Work in (1:4) cement & four coarse sand 2.20 F.M. morter in foundation and plinth and T&P etc 5 all completed as per the direction of engineer-in-charge. (AS PER PWD SOR 2022 PAGE NO 20 SI NO 6.05 ITEM NO 305 (a)

12 mm thick plaster with cement and coarse sand of 1.25 fineness modules in (1:4) over brick work minimum thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work. (AS PER PWD SOR 2022 PAGE NO 36 SI NO 13.11 NEW ITEM)

Providing wall putty on oid surface with approved quality material of Berger/J.K./Birla or similar make 2 coats. SOR 2022 TEMN. 15.27 NEW ITEM

Finishing wall with weather coat of approved make and quality on oid surface with two or more coat to give an even shade after thoroughly brushing the surface free from mortar dropping and other foreign matters and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work SOR 2022 ITEMN. 15.24 NEW ITEM

S/L C:C (1:2:4) with 20 mm stane grit, coarse sand & cement etc all complete as the direction of engineer in charge. (AS PER PWD SOR 2022 279 (a).

Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all

MS. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel balts, nuts wastage etc. and their fixing required for proper completion of the work.PWD SOR 2022 10.21

Taking out existing CC interlocking paver blocks from footpath/central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. DSR 2021

s/L of stone ballast 22.4 to 53 mm size with stacking for measurment etc all complete as per the direction of engineer in-charge. AS PER PWD SOR 2020 RMR

Supply of screening material with stacking for measurment etc all complete as per the direction of engineer in-charge AS PER PWD SOR 2020 RMR

Laying of interlocking tiles of 60 to 80 mm thick including levelling and dressing of surface up to require lavaldslopes filling joint with local sand including cos of labour etc all complete as per specification or direction by engineer in charge. (AS PER PWD SOR 2022 PAGE N. 53 SI N. 20.13