CWEAFJ-13/2021-22 SPECIAL REPAIR TO COOK HOUSE AND DINING AREAS OF COMBINED MESS AT AF STATION NATHATOP UNDER GE (AF) UDHAMPUR

Amount

B/R Portion

Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc all as specified.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified and directed.

All as per the description of Serial Item No '02' here-in-before but except bricks i.e. uing serviceable bricks obtained from Serial Item No '01' here-in-before complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed.

Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought up to courses, complete all as specified and directed. Note : Volume of PCC bond stone as provided in lieu of stone bond stone as per Serial Item No '07' here-in-after shall be deducted from total cumulative quantity of stone masonry.

All as per the description of Serial Item No '05' here-in-before but except stones i.e. using serviceable stones obtained from Serial Item No '01' complete, all as specified and as directed.

Pre-cast cement concrete, 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in bond stone set in cement mortar 1:6 and finishing exposed surfaces including necessary form work, complete, all as specified and as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm, complete all as specified & directed.

Flush pointing to random rubble masonry, coursed or uncoursed in cement mortar 1:3, complete all as specified & directed.

Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cills, lintels upto 1.5 metre clear span, steps, seismic and other similar band, plinth course, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stone, bed plates, kerbs etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and as directed.

PVC (SWR) pipe 110mm bore single socketed in any length as in weep holes complete all as specified and as directed.

Boulder filling dry, hand packed tightly, gauge exceeding 80mm not exceeding 150mm, as in back filling of retaining wall complete all as specified and as directed.

Demolition of cement concrete (re-inforced) in any description and in any position not otherwise specially provided for complete all as specified .

RCC M-25 (design mix) as in slabs supported on walls, beams, lintel bands and in columns in floors or roofs, landings, balconies and in shelves and the like complete all as specified and as directed.

Mild steel TMT bars 10mm dia and over, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finish flat surfaces of concrete, complete, all as specified and as directed.

Taking down cement plaster on bricks or stone wall/ceiling decayed surfaces of concrete from roof projection or RCC chajjas etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces, mixed with integral water proofing compound, finished even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving (un-reinforced) not exceeding 15cm. thickness, below or above ground level, complete and removing rubbish from the site, complete all as specified and directed.

Demolition of cement concrete (unre-inforced) in any description and in any position not otherwise specially provided for complete all as specified .

Hard core of broken stone gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.

PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate 100mm thick as in sub base, floors, pavings finished even and fair complete all as specified.

25mm thick PCC 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate) as in floor, finished even and fair to receive floor finishes, complete all as specified and as directed.

Non-skid coloured matt finish, joint free, ceramic tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) 600mm x 600mm x 7-8mm thick, over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed.

Non-skid coloured glazed, joint free, ceramic tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) 300mm x 300mm x 7mm thick, over and including 10mm thick screed bed in CM 1:4 as in skirtings etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed.

Glazed ceramic coloured, joint free, wall tiles in any type and in any pattern (Pattern consist of combination two or more different colour tiles etc.) in vertical surfaces of size 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, finished fair to received the tile, complete all as specified and directed.

18mm to 20mm thick of size not less than 53 x 53cm, machine cut Kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing, over and including 20mm thick screed bed or bedding layer of cement mortar 1:4 all as specified and as directed.

16mm to 18mm thick, machine cut Kota stone as in riser or steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and rounding off edges complete with mirror finish polishing, over and including 15mm thick screed bed or bedding layer of cement mortar 1:3 all as specified and as directed.

2mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting and sealed down with approved adhesive including taking down old unserviceable linoleum flooring and preparation of the surface complete all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutters from the frames not exceeding 1.50 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutters from the frames exceeding 1.50 Sqm and not exceeding 4.00 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Taking down shutter of any description, not exceeding 1.00 Sqm each all as specified and directed.

Taking down shutter of any description, exceeding. 1.00 Sqm and not exceeding 2.00 Sqm each all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening etc., complete as specified and directed.

Factory Made Solid PVC Moulded Prelaminated Door Shutter, with particle board core 28 to 30mm thick, with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in frame at site as per specification complete all as specified and as directed.

Anodised aluminium powder coated Frame for partition with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Anodised aluminium powder coated Frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Anodised aluminium powder coated door shutter, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars or three track type, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long hinges type B-21, 100mm long suitable handle complete all as specified and as directed.

Anodised aluminium powder coated window and ventilator shutters, sliding type, three tracks, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long hinges type B-21, 100mm long suitable handle complete all as specified and as directed.

Auminium snap bead (Glazing Clip) for securing glas etc. in aluminium framework, fixed in repairs, complete all as specified and as directed.

Silicon compound filled in gap between Stone / Brick / Concrete Wall surface and Aluminium chowkhat of Door and Window from both sides, width equal to width of chowkhat, inluding alignment of exising wall / pillar portion including filling of gap with wooden / aluminium beading if required complete all as specified and as directed.

Mild steel framed works such as grills, framed guard bars, etc. and similar work conforming to Fe- 410- O or Fe- 310- O grade, including bending, cutting and welding as required, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed.

5mm thick tinted sheet glass, one side mirror finish, fixed in aluminium frame complete including necessary rubber gasket and aluminium snap beading complete, all as specified and as directed.

4.8mm thick sheet glass ordinary quality and glazing with oil putty, fixed in aluminium Door / Window Shutter complete all as specified and as directed.

4mm thick sheet glass ordinary quality and glazing with oil putty, wooden beads or fixed in aluminium window shutter in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

4mm thick figured glass, pin head type and glazing with oil putty, wooden beads or fixed in aluminium window shutter in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Steel rolling shutters with ball bearing, of 1.25mm thick laths with gear operated type with bevel gear box and crank handle complete as specified including top cover, anchoring rod, hasp and staple axel rod frame guide channel 80 mm x 40mm, spring, hold fast, nut and bolt, locking plate both side as required for fixing and all other connected items required to complete functional of the rolling shutter including one shop coat primer, erected in position as indicated complete all as specified and directed.

Dismantling Structural Steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Mild steel rolled work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, square/rectangle sections, channel or flat section) including distance pieces, cleats etc. confirming to grade FE 410-0 complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.

Galvanised, corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roofs, 0.80mm thick, Gde-O quality, with 275 Grams/Sqm zinc coating and Gde 'B' (i.e. 12.5 mm) corrugation complete, all as specified and as directed.

0.80mm thick plain, galvanised, mild steel sheeting (ISI marked) grade 'O' with minimum 275 Grams/Sqm for zinc coating in ridges, hips, valley gutters, drip, and straight flashings, fixed with coach screws and washers complete, all as specified and as directed.

Dismantling Wall and Ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete, all as specified and as directed.

Suspended False Ceiling System using suspended ceiling grid sysytem with the size of gfrid as 600mm x 600mm with GI frame work, main runner 38 x 24mm, cross tee 38 x 24mm and wall angle 22.2mm x 22.2mm using 8mm thick Gypsum Board Tiles with PVC vinyl face on one side and aluminium foil backing on other side. The suspended ceiling system grid system shall be duly suspended by 4mm dia GI bar hangers from the purlins of the roof with butterfly clips complete, all as specified and as directed.

Wall panelling on existing wall surface made out of PVC profile section of size 150mm x 10mm with a wall thickness of 1mm (+/-) 0.5mm to be fixed on wall by self tapping screw of size 19mm x 6mm after putting rawl plugs. The necessary cutout of electrical connections is to be provided at places directed at site. The exposed edges / periphery is to be covered by extruded PVC bedding section of size 28mm x 12mm with a wall thickness of 5mm complete all as specified and as directed.

Stainless Steel Kitchen Sink, made out of 1.00mm thick sheet with plug, washers, waste pipe, coupling, cast iron cantilever brackets, connecting union overall size 495mm x 420 mm with bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 15mm dia complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 20mm dia complete all as specified and as directed.

Pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, fixed in repairs, complete all as specified and as directed.

Bib tap with wall flange cast copper alloy chromium plated, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed.

Bib tap with wall flange cast copper alloy chromium plated, fancy type, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed.

Stop cock / Angle valve with adjustable wall flange CP cast copper alloy, fancy type, with capstan head handle and adjustable wall flange, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, fixed in repairs, complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white, including ‘P’ or ‘S’ trap, white seat cover with flat bottom and mild steel CP hinging device, CP brass jet nozzle with 1500 mm long PVC pipe, fixed in repairs, complete all as specified and directed.

Chromium plated Health Faucet including CP flexible pipe for EWC fixed all as specified and completed.

Vitreous china Orissa pan of pattern, long pan size 580mm x 440mm, with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe, complete all as specified and directed.

10 litres capacity PVC low level flushing cistern of approved make complete with telescopic PVC flush pipe 32mm dia and long bend of 32mm dia, making connection to water closet,complete all as specified and directed.

Vitreous China urinal bowl flat back, coloured, size of 465mm x 355mm x 265mm white (back or corner wall type), with grating and union for discharge pipe complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and union for discharge pipe and and waste pipe inluding 5 litres capacaity PVC automatic flushing cistern with brackets and 32mm dia flush pipe, complete all as specified and directed.

Vitreous china wash hand basin 550 x 400mm, white flat back including cast iron bracket, cutting for and pinning the ends of brackets or erecting on stand including 32mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, PVC flexible waste pipe of bore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side, complete all as specified and as directed.

PVC connection 45cm long fitted with two Nos of brass checknuts and washers complete, fixed to 15mm bore iron pipes, complete all as specified and directed.

Brass chromium plated waste fitting 32mm dia with long screwed shanks and flynuts and flange for Sinks and Wash Hand Basins complete all as specified and as directed.

PVC cabinet for Bathroom with 4mm thick mirror, overall size not less than 350mm x 450mm complete all as specified and as directed.

PVC (SWR) pipes single socketed, 110mm bore in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

PVC (SWR) pipes single socketed, 110mm bore in any length with rubber ring joints, laid in walls complete all as specified and directed.

PVC (SWR) pipes single socketed, 75mm bore in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

PVC (SWR) pipes single socketed, 75mm bore in any length with rubber ring joints, laid in walls complete all as specified and directed.

PVC (SWR) bend 110mm bore complete all as specified and directed.

PVC (SWR) bend 75mm bore complete all as specified and directed.

PVC (SWR) Vent cowl bore of pipe 110mm complete all as specified and directed.

PVC (SWR) 'S' Trap suitable for bore of pipe 110 / 75mm complete all as specified and directed.

PVC (SWR) Floor Trap suitable for bore of pipe 75mm, plain with grating including solvent cement, complete all as specified and directed.

Preparation of plastered or previously untreated surfaces of walls and applying two coats of Weather Proof Exterior Emulsion (Water based) paint (shade as approved by user), complete all as specified and directed.

Preparation new plastered surfaces of wall and and applying two coats of oil emulsion distemper over a coat of alkali resistant primer coat over and including a coat of wall care putty (Birla/JK) of average thickness 2 to 3mm complete all as specified and as directed.

Preparation old plastered surfaces of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of oil emulsion distemper, complete all as specified and directed.

Preparation of old wooden surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.

Preparation of old steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

E/M Portion

Taking out carefully copper / aluminium point wiring, (Light, fan, socket or power) complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator, DB's etc. including making good the disturbed surface of wall/floors, complete all as specified and as directed.

Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including concealed PVC conduit 20mm dia or more as per the site requirement including its fittings and fixtures such as ties, bends, elbows and junction boxes etc. including 1.50 Sqmm copper earth wire (green colour) FRLS Cable as earth continuity conductor connected to main earthing and common earth terminal for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sunken box and inner and outer plate for mounting of Modular Switches including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.

All as per the description of Serial Item No 96 here-in-before but for one 3 pin socket outlet 05/06 Amp independent, complete all as specified and as directed.

All as per the description of Serial Item No 96 here-in-before but for one 5 pin socket outlet 05/06 Amp on same board, complete all as specified and as directed.

All as per the description of Serial Item No 96 here-in-before but for one 3 pin socket outlet 15/16 Amp independent board using cable of size 2.5 Sqmm conduit all as specified and directed.

Modular switch 1 way 6Amps, 1 module, complete all as specified and as directed.

Modular Socket, 6Amps, 2/3 pin combined 2 module, complete all as specified and as directed.

Modular switch 1 way 16Amps, 1 module, complete all as specified and as directed.

Modular Socket 6/16Amps, 2/3 pin combined 2 module, complete all as specified and as directed.

Modular Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings complete all as specified and as directed.

LED Lamp 230 Volts 12 watts, in white colour with maximum Lumen output (850 lm) and colour temp 3000 K with base cap B-22, complete all as specified and as directed.

Tube light fitting, batten type suitable for and including LED 20 tube Rod 4' long with decorative colour in aluminum housing and integrated electronic driver and all accessories pre-wired and making connections with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connector to light fitting complete all as specified and as directed.

Bulk head luminaries energy saving, surface mounted, decorative bulk head back-lit LED luminaire complete with all accessories suitable for and including 1 x 10 Watts LED lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts 50 Hz complete all as specified and as directed.

Exhaust fan, AC, SP 230/240V, 300mm sweep with louver, 1400 RPM complete with accessories complete provisioning of three core flexible copper cord of size 23/0.0076 of required length from connector to fan for connection, complete all as specified & directed.

Storage water heater (Geyser), vertical type, of 25 Litre capacity of inner tank, outer tank, syphon assembly, thermostat heating element, safety valve etc complete all as per manufacturer design and specifications including making of all fixing arrangements complete having BEE Five Star Rating including grouting of nuts and bolts and necessary PCC work as specified and directed.

Sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 8 Way including taking down and making good disturbed surfaces of walls, complete all as specified and as directed.

MCB SP 6 to 32 Amp 10 KA, 'C' curve, complete all as specified and as directed.

MCB SPN 6 to 32 Amp 10 KA, 'C' curve, complete all as specified and as directed.

Sub main wiring with two single core PVC insulated multistranded un-sheathed FRLS cable of size 4.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including conduit and accessories) with continuous PVC insulated multistranded unsheathed FRLS cable earth wire of 2.5 Sqmm dia including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Two runs of 4.0 Sqmm wire and one run of 2.5 Sqm and one run of PVC conduit shall be considered as one unit length.

Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundations, laying of cables, water supply pipes etc., and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.

Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 95 Sqmm 3.5 core including taking down/up old unserviceable cable and making good disturbed surfaces, complete all as specified and directed.

XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 35 Sqmm 3.5 core including taking down/up old unserviceable cable and making good disturbed surfaces, complete all as specified and directed.

Sand cushioning to under ground cable, laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete punned to 18cm, complete all as specified and directed. Note : Punned thickness of sand will be measured and paid.

Brick well burnt locally available sub-class 'B' laid over sand cushioning for mechanical cable protection in trenches with width of brick perpendicular to the length of cable, complete all as specified and as directed.

Galvanized iron water tubing, light grade, 80mm bore for protection of cable with all fittings fixed to walls and ceilings or laid in floors/road crossing, complete all as specified and directed.

Single Point Air Termination Aluminium Rod 12mm dia 300mm long complete all as specified and as directed.

Taking down carefully existing serviceable Panel including disconnecting all electrical connections and shifting the Panel to new site and refixing the same including making the electrical connections with suitable LT Cable jointing kit complete all as specified and as directed. Note : Cable jointing kit and PCC for foundation shall be measured and paid seperately under respective items.

Cable jointing kit for 1.1 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 to 95 Sqmm complete all as specified and as directed.

Cable jointing kit for 1.1 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 35 Sqmm complete all as specified and as directed.

Plain Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in copings etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 25mm, complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 50mm, complete all as specified and as directed.

Lagging to pipes of 20 mm bore (laid outside trenches) all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 chicken mesh wire netting 25 gauge, 20mm mesh and theeafter a layer of cement plaster in CM 1:4 complete all as specified and as directed.

Lagging to pipes of 25 mm bore (laid outside trenches) all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 chicken mesh wire netting 25 gauge, 20mm mesh and theeafter a layer of cement plaster in CM 1:4 complete all as specified and as directed.

PP-R Gate valves (brass inserted) as per requirement of the site, 50mm dia, complete all as specified and as directed.

Gun metal globe or gate valve with iron wheel heads, screwed both ends for 25mm dia bore iron pipe complete all as specified and directed.

Gun metal globe or gate valve with iron wheel heads, screwed both ends for 20mm dia bore iron pipe complete all as specified and directed.

Earthing complete with copper earth plate 600 x 600 x 3.15 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below ;normal ground level ) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to copper strip 20X3 mm as earth lead by means of bolts, nuts washers and check nuts of copper/bronze duly protected with 40 mm bore light grade pipe upto main board, 20mm bore watering pipe light grade with CI/MS funnel and wire mesh including excavation , earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 Mtr, add charcoal dust and common salt as directed by the Engr-in-charge all as shown in electrical plate No. 03 of SSR part-I 2009 having pit in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40x40x6mm grouted in PCC pit for CI cover of required size, funnel with wire mesh complete and all as specified and as directed.

Copper Strip 20 x 3mm complete with saddles / insulators made out of PVC or fibre and fixing screws for roof conductor/down conductor including welding or brazing for joints all as required at site complete all as specified and as directed.

M/S ASHOK KUMAR PACHIALA

kerni electricals

GENESIS INDIA

Bidder Name

kerni electricals

RANBIR ENTERPRISES

GENESIS INDIA

M/S ASHOK KUMAR PACHIALA