Loading
Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.0 L
Closing Date
27 Feb 2026, 10:30 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
CIVIL
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of "V/N" or 'V' which ever is less, where V= Advertised value of the tender in crores of Rupees N= Number ofyears prescribed for completion ofwork for which bids have been invited. The average annual contractual tumover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, tho audited balance sheet of the fourth previous year shall be considered for calculating average annual bontractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any Civil Engineering work except Track works/Transportation
32 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The following to be included as tender condition for Custom Compliance in IREPS for Electrical license as follows: "Electrical License: The tenderer should engage license holder, who possess valid contractor license of "ESB/EB" grade and C grade for medium voltage works or higher grade issued by Tamil Nadu State or any other state for executing the Electrical works. The tenderer should submit documentary proof on the above before commencing electrical works to Dy.CEE/M/ICF and get his approval."
SPECIAL CONDITION FOR GST-•The details of supply of Goods & Services are subject to GST rules applicable with effect from 01.07.2017.
Special Conditions for GST-All the Tenderers are requested to submit their "GSTIN" registration numbers at the time of tendering or at the time of submitting their invoice without which, payment will not be made.
The materials should be supplied as per the approved make list mentioned in the tender document
Improvements to Integral club for officers.
2026377212107~ICF
2026377212107
Open
Works - General
9 Months
Chennai, Tamil Nadu
₹0
₹2.0 L
27 Feb 2026
30 Jan 2026
13 Feb 2026
312 items across 12 schedules · ₹1,08,72,801.15 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 15 | 286.85 | 4,302.75 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 8 | 253.95 | 2,031.6 |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 4 | 2,161.2 | 8,644.8 |
| 4 | Beyond 30 cm girth upto and including 60 cm girth | Each | 2 | 439.25 | 878.5 |
| 5 | Beyond 60 cm girth upto and including 120 cm girth | Each | 2 | 1,957.15 | 3,914.3 |
| 6 | Beyond 120 cm girth upto and including 240 cm girth | Each | 3 | 9,084.05 | 27,252.15 |
| 7 | 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 4 | 7,783.65 | 31,134.6 |
| 8 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 8 | 6,326.05 | 50,608.4 |
| 9 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 4 | 9,793.75 | 39,175 |
| 10 | Foundations, footings, bases for columns | Sqm | 10 | 307.95 | 3,079.5 |
| 11 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 8 | 608.35 | 4,866.8 |
| 12 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 3 | 8,825.35 | 26,476.05 |
| 13 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 2 | 6,658.25 | 13,316.5 |
| 14 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 2 | 8,288.35 | 16,576.7 |
| 15 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 45 | 1,018.05 | 45,812.25 |
| 16 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. | Sqm | 45 | 86.45 | 3,890.25 |
| 17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 250 | 1,063.45 | 2,65,862.5 |
| 18 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. | Sqm | 370.96 | 4,474.2 | 16,59,749.23 |
| 19 | Second class teak wood | cum | .15 | 1,31,576.95 | 19,736.54 |
| 20 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 8 | 2,015.75 | 16,126 |
| 21 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | Sqm | 8 | 401.4 | 3,211.2 |
| 22 | Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). | Sqm | 8 | 93.65 | 749.2 |
| 23 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 450 | 197.7 | 88,965 |
| 24 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). | Each | 40 | 194.35 | 7,774 |
| 25 | 250x10 mm | Each | 8 | 374.35 | 2,994.8 |
| 26 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 4 | 723.8 | 2,895.2 |
| 27 | 125 mm | Each | 8 | 205.1 | 1,640.8 |
| 28 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | Each | 4 | 109.6 | 438.4 |
| 29 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | Each | 4 | 1,025.65 | 4,102.6 |
| 30 | Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) | Sqm | 3 | 7,249.9 | 21,749.7 |
| 31 | Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). | Sqm | 13 | 10,030.3 | 1,30,393.9 |
| 32 | Ordinary cement without any pigment | Sqm | 50 | 928.5 | 46,425 |
| 33 | Size of Tile 600 x 600 mm | Sqm | 80 | 1,311.05 | 1,04,884 |
| 34 | 110 mm diameter | Metre | 20 | 319.75 | 6,395 |
| 35 | 110 mm bend | Each | 4 | 132 | 528 |
| 36 | 110 mm Shoe | Each | 4 | 115.95 | 463.8 |
| 37 | 110 mm | Each | 16 | 309.5 | 4,952 |
| 38 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. | Each | 2 | 47.9 | 95.8 |
| 39 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) | Sqm | 120 | 1,145.95 | 1,37,514 |
| 40 | 1:4 (1 cement: 4 fine sand) | Sqm | 250 | 294.85 | 73,712.5 |
| 41 | 1:6 (1 cement: 6 fine sand) | Sqm | 100 | 282 | 28,200 |
| 42 | New work (two or more coats) over and including water thinnable priming coat with cement primer | Sqm | 132 | 162.55 | 21,456.6 |
| 43 | Water thinnable cement primer | Sqm | 100 | 64.45 | 6,445 |
| 44 | New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | Sqm | 100 | 162.35 | 16,235 |
| 45 | Two or more coats on new work | Sqm | 16 | 131.45 | 2,103.2 |
| 46 | Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish | Sqm | 16 | 197.4 | 3,158.4 |
| 47 | New work | Sqm | 16 | 164.15 | 2,626.4 |
| 48 | One or more coats on old work | Sqm | 100 | 90.85 | 9,085 |
| 49 | Dismantling W.C . Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. | Each | 2 | 110.7 | 221.4 |
| 50 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. | Sqm | 80 | 2.85 | 228 |
| 51 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 8 | 2,007.1 | 16,056.8 |
| 52 | In cement mortar | cum | 6 | 1,698.45 | 10,190.7 |
| 53 | Of area 3 sq. metres and below | Each | 25 | 118.3 | 2,957.5 |
| 54 | For thickness of tiles 10 mm to 25 mm | Sqm | 330 | 60.5 | 19,965 |
| 55 | Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. | cum | 1 | 2,328.55 | 2,328.55 |
| 56 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 23 | 219.35 | 5,045.05 |
| 57 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | Each | 6 | 299.35 | 1,796.1 |
| 58 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. | Each | 4 | 886.25 | 3,545 |
| 59 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | Each | 10 | 942.15 | 9,421.5 |
| 60 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 10 | 600.35 | 6,003.5 |
| 61 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. | Each | 3 | 13,036.55 | 39,109.65 |
| 62 | 15 mm nominal dia Pipes | Metre | 3 | 255.9 | 767.7 |
| 63 | 20 mm nominal dia Pipes | Metre | 25 | 513.75 | 12,843.75 |
| 64 | 25 mm nominal dia Pipes | Metre | 50 | 626.05 | 31,302.5 |
| 65 | 25 mm nominal dia Pipes | Metre | 50 | 370.65 | 18,532.5 |
| 66 | 32 mm nominal dia Pipes | Metre | 25 | 435.05 | 10,876.25 |
| 67 | 50 mm dia nominal bore | Metre | 50 | 654.2 | 32,710 |
| 68 | 15 mm nominal bore | Each | 10 | 708.4 | 7,084 |
| 69 | 15mm nominal bore | Each | 10 | 500.35 | 5,003.5 |
| 70 | 15 mm nominal bore, 165 mm long, weighing not less than 110 gms | Each | 10 | 156.65 | 1,566.5 |
| 71 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 10 | 96.75 | 967.5 |
| 72 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. | Metre | 60 | 171.8 | 10,308 |
| 73 | 100 mm diameter | Metre | 10 | 375.75 | 3,757.5 |
| 74 | 100 mm diameter S.W. pipe | Metre | 10 | 895.5 | 8,955 |
| 75 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 10 | 2,453.55 | 24,535.5 |
| 76 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 2 | 7,308.15 | 14,616.3 |
| 77 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 300 | 433.95 | 1,30,185 |
| 78 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 12 | 1,019.8 | 12,237.6 |
| 79 | Upto 5mm depth and 5 mm width | Metre | 70 | 85.25 | 5,967.5 |
| 80 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | cum | 10 | 7,510.75 | 75,107.5 |
| 81 | Frame size 50 x 100 mm | Metre | 15 | 853 | 12,795 |
| 82 | 30 mm thick | Sqm | 6 | 4,327.7 | 25,966.2 |
| Schedule total | ₹35,35,582.97 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .