COMPREHENSIVE MAINT TO BLDGS OF GROUP-V UNITS/ LOC AT LEIMAKHONG MIL STN

Schedule 'A'

Taking down Chowkats or frames with shutters (without taking of shutters from the frame) exc. 1.5 Sqm but n.exc. 4 Sqm complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking of shutters from the frame) area n. exc 1.5 Sqm complete all as specified and directed.

Taking down shutter of any description and removing frome site exc. 1 Sqm & n. exc. 2 Sqm each leaf complete all as specified and directed.

Taking down shutter of any description and removing frome site n exc. 1 Sqm each leaf complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 30 mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 2nd Class H.W. Skeleton shutter 35 mm thick open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered or rounded & rebated sash bars (of any nos)as spd in SSR Pt-I Sec 8 of Cl. 8.24.(a) as per specification complete all as specified and directed.

S&F 2nd Class H.W. Skeleton shutter 30 mm thick open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered or rounded & rebated sash bars (of any nos)as spd in SSR Pt-I Sec 8 of Cl. 8.24.(b) as per specification complete all as specified and directed.

S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factorymade solid pannel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with neat moulded plan colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on eithor side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet bedding and jointed together with solvenet cement, supply and fixing in the frame at site as per specification complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new or previously untreated wood surfaces of any description not other wise described over 10 cm with or girth complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking of shutters from the frame) area n. exc 1.5 Sqm each and refixing in same opening complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking of shutters from the frame) area exc. 1.5 Sqm but n.exc. 4 Sqm each and refixing in same opening complete all as specified and directed.

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36mm nominal dia of wire & average width of aperture 1.40mm including good quality of bearing handle, locks, PVC rubber lining, rollers etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F aluminium powder coated ventiltors/ louvers with parttially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed.(a) SP :20048 (b) Glazing clips :19352

M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15 ) of approved design/pattern , with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer - in - charge complete all as specified and directed.

S&F aluminium anodised Hasp and staple 75mm , safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 100 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply and fix extruded aluminium alloy handles, 100 mm long fabricated type., anodised complete all as specified and directed.

S&F 100 mm long Stainless Steel butt hinges medium weight cold rolled complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue with hard drawn steel spring with 140mm overall length of cover plate complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.

S&F in repair 100 mm long Stainless Steel butt hinges medium weight cold rolled complete all as specified and directed.

S&F in repair 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repair extruded aluminium alloy handles, 150 mm long fabricated type., anodised complete all as specified and directed.

S&F in repair aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.

S&F in repair floor door stopper of aluminium alloy body and tongue with hard drawn steel spring with 150mm overall length of cover plate complete all as specified and directed.

S & F in repairs fancy type decorative Drapary rod of 20mm dia for window and doors with curtain rings and decorative doom holders fixed to wall with screw complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking Out Old broken Glass (any thickness,Size,Quality Or description) from wooden frames or Steel frame, concrete or brick surrounds,glazed with Putty or fixed with beads area not exc 1.5 sqm complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality & glazing with oil putty in squares n. exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F figured glass 3 mm thick, pin head type & glazing with oil putty in squares n. exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F door closer (aluminium extuded body section) hydraulically regulated, ,designation No 1 universal type, suitable for door shutters up to 700mm in width and of wieght not more than 35Kg complete all as specified and directed.

S&F in repairs vitreous china European type wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat black closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity white in colour and PVC flush pipe 32mm dia complete all as specified and directed.

Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests Complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltrs capacity ISI marked incl PVC down pipe and connection etc all complete all as specified and directed.

S&F in repairs plastic water closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed.

Supply only Flush pipe of polyethylene of low or high density of PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repair Vitreous china coloured Wash Hand Basin (Oval Shape) 580mm X 450mm, including 15 mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brass CP waste fitting & 15 mm PVC connection pipe 450 mm long fixed complete all as specified and directed.

Supply and fix in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union fixed complete all as specified and directed.

S&F in repair for stop cock copper alloy CP screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed 15 mm bore complete all as specified and directed.

S&F in repair bib taps cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs 32/50mm dia PVC waste pipe for kitchen sink , WHB , Urinal etc complete all as specified and directed.

Supply and fix in repair 15mm bore pillar taps of cast copper alloy with capstan head CP screwed down high pressure with or without lettered hot and cold with long screwed shank and fly nut for iron pipe and fixed complete all as specified and directed.

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts to length 450 mm fixed complete all as specified and directed.

S&F in repair Brass, Chromium plated, Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws complete all as specified and directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and fix in repairs brass Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

Taking down steel tubing and connections including cleaning for re-fixing or removal to store of 15 mm bore complete all as specified and directed.

Taking down steel tubing and connections including cleaning for re-fixing or removal to store of 20 mm bore complete all as specified and directed.

S&F GI tubing 15mm dia medium grade galvannised with all fitting &fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S&F GI tubing 20mm dia medium grade galvannised with all fitting &fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement dia of outlet in 75mm complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius of 110mm dia. With oval and access door complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius of 75mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece (single ‘Y’) equal or unequal for 110mm dia PVC pipe complete all as specified and directed.

S&F in repair PVC(SWR) branch piece (single ‘Y’) equal or unequal for 75mm dia PVC pipe complete all as specified and directed.

S&F in repair for PVC (SWR) junction (single ‘T’) with access door for 110mm dia pipe complete all as specified and directed.

S&F in repair for PVC (SWR) junction (single ‘T’) with access door for 75mm dia pipe complete all as specified and directed.

S&F in repair for PVC (SWR) vent cowl suitable for 110mm dia PVC pipe complete all as specified and directed.

S&F in repair for PVC (SWR) vent cowl suitable for 75mm dia PVC pipe complete all as specified and directed.

Supply and fix in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in pipe 20 mm dia complete all as specified and directed.

S&F in repair sinks made of stainless steel of 1 mm thick kitchen sink with plug washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 x 420 mm bowl size 410 mm x 330 mmx 160 mm complete all as specified and directed.

Dismantling Water tanks & removing from site to store, capacity of tanks exc 250 litres & n. exc. 500 Litres capacity each complete all as specified and directed.

Dismantling Water tanks & removing from site to store, capacity of tanks 500 ltr and n exc 1000 ltr complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank, ISI marked, 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections like ball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube complete all as specified in SSR Part-I and as directed.

S&F rotational moulded polyethylene water storage tank, ISI marked, 1000 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections like ball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube complete all as specified in SSR Part-I and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, Capacity exc 250 litrs n exc 500 litrs, cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, Capacity exc 500 litrs n exc1000 litrs and cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. Note :-Dismantling of false ceiling to be carried out carefully without damaging existing fitting and fixtures of flase ceiling items

S&F 4mm thick plywood grade BWR (type BB) fixed with nails to the timber frame work as in wall complete all as specified.

M&L for Second class hardwood Weather boarding, clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed complete all as specified and directed.

Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour, pattern and size as approved, fixed with approved adhesive as per manufacturer’s instructions on horizontal and vertical surfaces etc. complete all as specified and as directed.

Material and labour for 4mm thick one side decorative group match veneer complete all as specified and as directed.

Dismantling of timper scantling 40 sq .cm and over in section,in any position complete all as specified and directed.

M&L for second class hard wood in scantling wrought, timber framed & fixed complete all as specified and directed.

All as per item No 88.00 here-in-above but except timber scantling complete all as specified and directed (NOTE: Seviceable second class hard wood obtained from dismantling under Sl item No 88.00 here-in-above shall be reused under the item)

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, including one coat shop primer complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint on steel surfaces over one coat of red oxide primer including preparation of new steel surfaces exceeding 10 cm width or girth complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coveringscomplete all as specified and directed.

S&F Pre-Painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L" or 'J' type hook bolt and washer or self tapping screws in roof, wall etc.with grade of zinc coating 275 complete all as specified.

S&F 0.60mm thick, plain galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M&L for filleting in any position & to any shape, sectional area exc.25 but n. exc. 50 sqcm. In CM 1:4 including all mitres , stops etc, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.

M & L for brick work with sub class ‘B’ brick straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base/flooring/ paving complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 20mm graded stone aggregate) as in plinth protection/hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 10mm thick plaster on fair faces of brick work or concrete surfaces (1:6) finished the surface even and Smooth without extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on on fair surfaces of brick in two separate coats (10mm thick backing coat and 5mm thick top coat) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing works/concrete surfaces finished even and smooth complete all as specified and directed. Note : (i) WPC will be measured and paid separately (ii) Rates deemed to be inclusive of scaffolding upto height 12 Mtr at reqd places. No additional payment will be made on this account.

Supply only intergral water proofing compound complete all as specified and directed.

M&L for rendering 5mm thick on fair face of concrete surface of ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of surfaces plastered or unplastered new surface on ceiling and applying three coats of white washing complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat alkali resistent primer to newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and includig 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 as backing coat to receive tiles complete all as specified and directed.

M & L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and includig 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed 20mm thick in CM 1:3 complete all as specified and directed.

Material and labour for bitumen patches on roof sheet area n. exc 2 sqm each patch to arised the leakage seapakge complete all as specified and directed.

Taking down copper/ aluminium point wiring ie. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors, etc complete all as specified and directed.

Material and labour for point wiring concealed type with two single core 1.5 Sq mm (nominal area) FRLSH PVC insulated 1100 volts grade and unsheathed, multi-stranded, copper conductor single core cable through and including concealed wiring 20 mm pvc rigid conduit with all fixing accessories and suitable including 1.6 mm thick size sunk MS pressed steel modular box including suitable size of white modular frame with cover plate for mounting modular switches,sockets and regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) (a) One light point controlled by one, one way switch. Note :- (i) The quoted rate shall be deemed to be inclusive mild steel sunken boxes/modular cover plate and cutting chases in brick wall/ pillars etc for concealing the depth and making good the disturbed surfaces in CM 1:4 including finishing the surface to match with the portion of point wiring at for covering/ fix sunken boards/ terminals. (ii) Fiitings like switches, sockets, regulators, lamp holders, light fitting etc shall be measured and paid for separately of concern item of Sch 'A'.

One ceiling/exhaust fan point controlled by one, one way switch

One socket outlet 5 Amps 3 pin on same board with other switch

One socket outlet 5 Amps 3 pin on independent board with cable of 1.5 sqmm size complete all as specified and directed.

All as per item No. 120.00 here-in-above but with cable size 2.5 Sqmm for one 3 pin, 15 Amps socket outlet on independent board and multistranded PVC insulated copper earth continuity conductor of size 2.5 Sqmm complete all as specified and directed.

Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLSH PVC insulated and unsheathed cable 1100 volts grade, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size modular PVC boxes including modular frame and white cover plate for mounting modular switches,sockets and fan regulator etc including all accessories and using multi-strand PVC insulated unsheathed stranded copper cable 1100 volts as earth continuity conductor of size 1.5 Sq mm (nominal area) FRLSH PVC and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) (a) One light point controlled by one, one way switch. Note :- (i) The quoted rates shall be deemed to be inclusive for fixing the PVC casing capping to surface. (ii) Fiitings like switches, sockets, regulators, lamp holders, light fitting etc shall be measured and paid for separately of concern item of Sch 'A'.

One ceiling/exhaust fan point controlled by one, one way switch

One socket outlet 5 Amps 3 pin on same board with other switch

One socket outlet 5 Amps 3 pin on independent board with cable of 1.5 sqmm size complete all as specified and directed.

One bell point controlled by one way switches complete all as specified and directed.

All as per item No. 125.00 here-in-above but with cable size 2.5 Sqmm for one 3 pin, 15 Amps socket outlet on independent board and multistrand PVC insulated copper earth continuity conductor of size 2.5 Sqmm complete all as specified and directed.

All as per item No 125.00 here-in-above but with cable size 4 Sqmm for one 3 pin, 15 Amps socket outlet on independent board and multistrand PVC insulated copper earth continuity conductor of size 4 Sqmm complete all as specified and directed.

S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.

S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.

S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.

S&F modular Socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed.

S&F Bell push switch Modular type single pole one way 6 Amp 240 Volts complete all as specified and directed.

S&F Modular step type regulator 120W, 2 module ,heavy duty, 240 volts complete all as specified and directed.

S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.

M&L for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type including one lamp complete all as specified and directed.

Taking down old unserviceable submain wiring/ service wire any size complete all as specified and directed.

S&F submain wiring with single core 6.0 sqmm PVC FRLSH insulated unsheathed cable multi stranded copper conductor drawn through and inclduing PVC casing capping of suitable size with all fittings and fixing accessories on roof , walls, ceiling etc including 6.00 Sqmm PVC insulated unsheathered one core multistranded copper condutor earth wire complete all as specified and directed. (Note : Two run of single core cable and one run earth wire will be measured as one length)

S&F submain wiring with single core 4.0 sqmm PVC FRLSH insulated unsheathed cable multi stranded copper conductor drawn through and inclduing PVC casing capping of suitable size with all fittings and fixing accessories on roof , walls, ceiling etc including 4.00 Sqmm PVC insulated unsheathered one core multistranded copper condutor earth wire complete all as specified and directed. (Note : Two run of single core cable and one run earth wire will be measured as one length)

S & F of 1100 volts grade heavy duty cabled PVC insulated aluminium conductor served with inner sheating of PVC tape and over all PVC sheathed in service connection one twin core cable 2 core flat of 10 sqmm size complete all as specified and directed.

S&F in repair 23/0.0076 sqmm 2 core flexible copper cable for maintenance of light/ fan etc complete all as specified and directed.

Supply and fix in repair socket outlet, 3 pin, flush type, 5 Amps, complete all as specified and as directed.

Supply and fix in repair socket outlet, 3 pin, flush type, 15 Amps, complete all as specified and as directed.

S&F in repair switch piano flush type single pole one way 5 Amp 240 Volts complete all as specified and directed.

S&F in repair switch piano flush type single pole one way 15 Amp 240 Volts complete all as specified and directed.

S & F in repair switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal 240 Volt complete all as specified and directed.

S&F in repair Bell push flush type single pole 5 Amp 240 Volts complete all as specified and directed.

Supply and fix in repair stepped type electronic fan regulator flush type, 230 Volt, 5 speed control complete all as specified and directed.

S & F in repair modular switch 6 Amps, single pole, one way complete all as specified and directed.

S & F in repair modular switch 16 Amps, single pole, one way complete all as specified and directed.

S&F in repair modular socket outlet 6Amp 2/3 pin combined 2 module 240 Volts complete all as specified and directed.

S&F in repair modular socket outlet 6/16 Amp 5 pin 2 module 240 Volts complete all as specified and directed.

S&F in repair modular bell push type single pole 6 Amp 240 Volts complete all as specified and directed.

S&F in repair Modular step type fan regulator 120W, 2 module ,heavy duty, 230 volts complete all as specified and directed

S&F blank spacer plate for single module complete all as specified and directed.

Taking down old unserviceable PVC box any type and any size complete all as specified and directed.

S&F modular PVC box including white cover plate with frame for fixing of 1 module complete all as specified and directed.

S&F modular PVC box including white cover plate with frame for fixing of 2 module complete all as specified and directed.

S&F modular PVC box including white cover plate with frame for fixing of 3 module complete all as specified and directed.

S&F modular PVC box including white cover plate with frame for fixing of 4 module complete all as specified and directed.

S&F modular PVC box including white cover plate with frame for fixing of 6 module complete all as specified and directed.

S&F modular PVC box including white cover plate with frame for fixing of 8 module complete all as specified and directed.

S&F modular PVC box including white cover plate with frame for fixing of 12 module complete all as specified and directed.

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size 100mm x 100mm x 50 mm complete all as specified and directed.

All as per serial item No.167.00 here-in-above but for size 175x100x50 mm deep complete all as specified and directed.

All as per serial item No.167.00 here-in-above but for size 200x150x50 mm deep complete all as specified and directed.

All as per serial item No.167.00 here-in-above but for size 250x200x50 mm deep complete all as specified and directed.

All as per serial item No.167.00 here-in-above but for size 350x300x50 mm deep complete all as specified and directed.

S&F in repair bell Buzzer , Ding Dong Type , AC 230 Volts single pole complete all as specified and directed.

S&F in repair Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F in repair of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type complete all as specified and directed.

Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed.

S&F sheet metal enclosure DB, TPN, IP 43 protection, double door, 240 volts, Vertical Type 4 way including 200 Amp rated busbar, neutral link, din rail suitable for mounting MCBs of minimum 415 Amps rating complete all as specified and directed.

S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 12 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door Type for breaking capacity 10 KA complete all as specified and directed.

S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door Type for breaking capacity 10 KA complete all as specified and directed.

S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 4 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door Type verticle for breaking capacity 10 KA complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 20 Amps 10 KA complete all as specified and directed.

S&F MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F MCB single pole and neutral 40 to 63 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F MCB TPN four pole 40 to 100 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F in repair of PVC conduit size 25mm Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

S&F in repair PVC flexible pipe 16/20mm in dia for covering of electrical wire complete all as specified and directed.

Taking down / dismantling old unserviceable LED tube light fittings complete all as specified and directed.

S&F in repair LED light fitting mirror type with high output diffuser 2 feet, 10 watt, 220V, AC decorative type with driver holder and LED lamp including connecting up with three coat flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair LED light fitting 1x20 Watt , 220 V , AC decorative box type white/ warm with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in repair LED light fitting 1x20 Watt , 220 V , Inverter type AC decorative box type white/ warm with driver , holder including LED tube light 20W, with 4 hours electric backup, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type white/warm with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F round/ square shape 6 watt 220 volt AC resessed type white/ warm with high effciency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F round/ square shape 15/18 watt 220 volt AC resessed type white/ warm with high effciency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair LED builidng security light fitting 25 Watt 230 V, AC out door type with high pressure dia cast aluminium hosing and heat resistant complete with driver , lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F in repair LED bulb Lamp 09/12 Watts white/ warm Retrofit B22 holder type base wth polycorbonate diffuser and alluminiun heat sink complete all as specified and directed.

S&F in repair LED bulb Lamp Inverter light 09/12 Watts white/ warm Retrofit B22 holder type base wth polycorbonate diffuser and alluminiun heat sink, with 4 hours electric backup complete all as specified and directed.

S&F in repair driver of LED recesses mounted panel light (2'x2') 36 watt complete all as specified and directed.

Taking down and dismantling of storage type water geysers of 25/50 ltrs capacity any type any make, any model, from its existing location, transportation to work shop for repairs and transportation back and reinstallation of geyser as per technical instructions and as directed by engr-in-charge and including the following:- (a) Dismantling complete geyser and carrying out complete overhauling i.e; disconnecting electric supply and opening the heating plate, inner assembly, descaling complete assembly including heating element or otherwise. Replacement of defective heating element inlet and outlet tubes and refixing the assembly with gasket of good quality and tightening the nuts properly, reassembling geyser with all safety devices as specified in technical instructions and as directed by Engineer -in- Charge complete. Notes:- (i) Spare parts, safety devices with its required accessories shall be measured and paid seperately .

Supply only following spare parts of geysers 50/25 Ltrs capacity ISI marked. (198.01) Heating element 1.5/2 KW suitable for operation on 230V AC 50Hz

(198.02) Thermostat 40 to 90 degree centigrade varying capactiy for 25/50 Ltrs capacity Geyser.

(198.03) Hot/ Cold PVC flexible conneciton pipe with brass check nuts complete as per site requirement all as specified and directed by Engineer-In-Charge.

(198.04) Indicator lamp assembly for geyser complete all as specified and directed by Engr-In-Charge.

(198.05) Syphon assembly suitable for 25/50 ltr geyser complete including nuts and washer complete all as specified and directed.

(198.06) Geyser brass tank for 25/50 ltr geyser complete including nuts, washer, glass wool etc complete all as specified and directed.

S&F in repair 15 Amp plug top complete all as specified and directed.

M&L in repair for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion complete all as specified and as directed. (Note: Earth strip beyond 7.5 m length will be measured & paid separately)