KMC/LTG/CRM/DEC/CHIM/2025-26

TOTAL

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

BUILDING WORKS (A) EARTH WORK,ANTITERMITE TREATMENT 1.Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.

BUILDING WORKS ( C ) Brickworks,Concrete Works etc.24..Providing Bored Cast-in-situ grade R.C.C. pile in position as per specifications in all kinds of soil including cost of boring using drilling mud to stabilize the bore and flushing the bore of excess mud with freshly prepared drilling fluid by using pumps prior to placing concrete by tremie pipe in one continuous operation and including the cost of all materials and labour for placing of concrete and also including the cost of mobilization and hire charges of all equipment necessary for boring, welding of reinforcement cage as necessary and lowering of reinforcement cage, preparation and placing of concrete, including the cost of concrete but excluding the cost of reinforcement and labour for bending binding etc. complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. Work to be executed as per IS: 2911 (Part II Sec 2).(b) Using tripod, winches.i) Pile diameter - 450 mm.Note: 1. The rate provided is exclusive of cost of concrete. Construction wing is to add cost of concrete of desired grade for volume corresponding to 1.0m length of pile length, to arrive at the complete rate. Also the desired crushing strength is to be mentioned in the space provided in the description of item. The Rate of providing the temporary steel casing upto 3m depth is included. 2.To obtain the complete rate the construction wing have to add cost of concrete volume for 1m length of pile, multiplied by a factor:[1+ { dummy length of pile( max=1.5m) / Individual pile length}] 3. The cost of dismantling the length of the pile above cut off level is to be paid separately.

BUILDING WORKS ( C ) Brickworks,Concrete Works etc..26...Removal of mud/sludge/slurry/liquid earth obtained during piling work from the working site and disposal of the same beyond the KMC/Municipal or any suitable area with conformity of Municipal Corporation Rules using tanker including loading and unloading the same with pump, clearing the site complete in all respect as per direction of the Engineer-in-charge..(a) For 450mm Pile

BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLES ETC 3. Dismantling R.C. floor, roof, beams etc including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.(a) In ground floor including roof.

BUILDING WORKS (A) EARTH WORK,ANTITERMITE TREATMENT 2. Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

BUILDING WORKS (A) EARTH WORK,ANTITERMITE TREATMENT 2. Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches levelling, dressing and ramming the bottom, bailing out water as required complete (b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring

BUILDING WORKS (A) EARTH WORK,ANTITERMITE TREATMENT 3. Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.

BUILDING WORKS (A) EARTH WORK,ANTITERMITE TREATMENT 4. (B) Do - by fine sand

BUILDING WORKS ( C ) BRICKWORKS, CONCRETE WORKS Etc. A. BRICK WORKS 1. Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. ( 3rd Corrigenda & addenda dated 04.06.2018)

BUILDING WORKS ( C ) Brickworks,Concrete Works etc..22..(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering)In ground floor(A) [Pakur Variety](a) 1:3:6 proportion. (3rd Corrigenda & addenda dated 04.06.2018)

BUILDING WORKS ( C ) Brickworks,Concrete Works etc 18?..Supplying ready mixed concrete of M 25 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. [cement to be supplied by the Manufacturer/ supplier] In Ground Floor and Foundation(ii) With approved concrete pump [Note: 1. Lifting charge for items of 12 to 21 of subhead B without approved concrete pump as per item 23 of subhead B. 2. Lifting charge for items of 12 to 21 of subhead B with approved concrete pump @ Rs 20/- per Cu.m per floor.]

BUILDING WORKS ( C ) Brickworks,Concrete Works etc.40..Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m.(i) Tor steel/Mild Steel.I. SAIL/ TATA/RINL. (10th Corrigenda & addenda dated 22.01.2020)

BUILDING WORKS ( C ) Brickworks,Concrete Works etc?36...Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor).(When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof).(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.Notes:- For shuttering in shell roof, grid roof with vertical faces folded plate, arched roof the rate in 36 (a), 36 (b) & 37 (c ) of subhead B above to be increased by 100 % . For grid roof with splayed faces, rate is to be increased by 150%.

BUILDING WORKS ( C ) Brickworks,Concrete Works etc A. BRICK WORKS 16. 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. ( 3rd Corrigenda & addenda dated 04.06.2018)

SECTION 1 BUILDING WORKS (I) PLASTERING, POINTING ETC. A. ORIGINAL WORKS 1.Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar (a) 20 mm thick plaster(3rd Corrigenda & addenda dated 04.06.2018)

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. B. REPAIRING 1. Labour for lowering and stacking after dismantling in parts R.S. joists, channels, angles, tees, plates etc.complete as directed (a) From 1st floor level

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. B. REPAIRING 1. Labour for lowering and stacking after dismantling in parts R.S. joists, channels, angles, tees, plates etc.complete as directed (b) Add extra for each addl. Floor

(RATE AS PER CURRENT MARKET PRICE) SUPPLY AND INSTALLATION OF CHIMNEY BASE PLATES (UPPER AND BOOTOM PLATES, SHAPES OF A CIRCULAR DISC OF INNER DIAMETER 1200 MM AND OUTER DIAMETER 1600 MM) MADE OF 25 MM THICK MS PLATE COMPLETE IN ALL RESPECT INCL. NECESSARY ASSEMBLY AND FABRICATION WITH THE CONICAL PART OF THE CHIMNEY ALONG WITH SUPPLY AND INSTALLATION OF RECANGULAR GUSSET OF DIMENTION (250 X 200) MM BETWEEN UPPER AND BOTTOM BASE PLATE AND TRAINGULAR GUSSET OF DIMENTION (200 X 200) MM MADE OF 25 MM MS PLATE BETWEEN UPPER PLATE AND CONCICAL PART OF THE CHIMNEY INCL. NECESSRY ASSEMBLY AND FABRICATION COMPLETE IN ALL RESPECT AS PER DIRECTION OF EIC.

(RATE AS PER CURRENT MARKET PRICE) SUPPLY, INTALLATION OF 12.50 METER LONG CONICAL SECTION (SHAPE OF A TRUNCATED CONE) AT THE LOWER PORTION OF CHIMNEY OF DIAMETER REDUCED FROM 1200 MM TO 400 MM (BOTTOM TO TOP) BY ASSEMBLING OF 10 SMALL PARTS (EACH SMALL TRUNCATED CONE OF 1250 MM LONG, BOTTOM 5 PARTS MADE WITH 10 MM THICK MS SHEET, TOP 5 PARTS MADE WITH 08 MM THICK MS SHEET) TO BE CUT, ROLLED AND WELDED ON THE TOP BASE PLATE AND HAVING FLANGES ALONG THE PERIPHERAL END PORTIONS OF EACH SMALL PARTS OF 12.50 METER LONG CONICAL CHIMNEY PART, TOTAL 10 PARTS WITH 75X10 MM MS FLAT COMPLETE IN ALL RESPECT AS PER DIRECTION OF EIC.

(RATE AS PER CURRENT MARKET PRICE) SUPPLY AND INSTALLATION OF 12.50 METER LONG CYLINDRICAL PORTION BY ASSEMBLING OF 10 NOS. SMALL PARTS (EACH OF 1250 MM LONG, 400 MM DIA) MADE OF 6 MM THICKNESS MS PLATE TO BE CUT, ROLLED AND WELDED ON THE TOP OF THE CONICAL PART AND HAVING BOTH END CIRCULAR FLANGES ALONG THE PERIPHERAL END PORTIONS OF EACH SMALL PARTS OF 12.50 METER LONG CYLINDRICAL CHIMNEY PORTION, TOTAL 10 PARTS WITH 75X10 MM MS FLAT COMPLETE IN ALL RESPECT AS PER DIRECTION OF EIC.

(RATE AS PER CURRENT MARKET PRICE) SUPPLY AND INSTALLATION OF CHIMNEY HOOD OF CONICAL SHAPE OF 800 MM DIA, 500 MM HEIGHT MADE OF 6 MM THICK MS SHEET & TO BE FIXED AT THE TOP OF THE CHIMNEY WITH NECESSAY MS FLAT IN ORDER TO PREVENT ENTRY OF ANY FOREIGN MATERIAL FROM OUTSIDE TO CHIMNEY

(RATE AS PER PRESENT MARKET PRICE) SUPPLY AND INSTALLATION OF MS LADDER OF LENGTH 24MTR.(APPROX) FROM GROUND LEVEL TO TOP OF THE CHIMNEY INCLUDING NECESSARY SUPPORT AND WORKING PLATFORM COMPLETE IN ALL RESPECT AS PER DIRECTION OF EIC.

(RATE AS PER PRESENT MARKET PRICE) SUPPLY AND INSTALLATION OF SLIGHTLY TAPERED RECTANGULAR DUCT MESURED FROM (500 X 500) MM TO (300 X 300) MM AND 1 METER LONG MADE OF 03 MM STAINLESS STEEL 304 TO CONNECT ID FANS WITH CIMNEY

(RATE AS PER PRESENT MARKET PRICE) SUPPLY AND INSTALLATION OF MANHOLE / INSPECTION DOOR OF DIMENTION (800 X 800) MM IN THE BOTTOM OF THE CHIMNEY MADE OF 10 MM MS PLATE

BUILDING WORKS ( C ) Brickworks,Concrete Works etc.39...Extra for high scaffolding in water tank for repairing, painting etc.NOTE : Height of the bottom of the tank not less than 15 mtrs.

SECTION 1 BUILDING WORKS (K) PAINTING, VERNISHING ETC A. ORIGINAL WORKS 1 (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.)

BUILDING WORKS (K) PAINTING, VERNISHING ETC?(A) ORIGINAL WORKS.(3)(B)Painting with superior quality aluminium paint of approved make and brand including smoothening surface by sand papering etc. on steel surface : (b) Two coats

Supply and delivery of Neoprene Rubber Sheet- 5mm thick

SCHEDULE OF RATES FOR EARTHING INSTALLATIONS.Earthing Installation ... with Pipe Electrode.Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (HOT Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(a)By ISI Medium GI pipe.

Earth busbar Supplying & fixing earth busbar of galvanized (HOT Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Erection of Earth Wire, Safety Devices, Cradle guard, Lightning arrestors, Fuses etc.6. Supplying & Fixing ...Horn Gap... type lightning arrestor complete with 100x63 mm porcelain pin insulator & brass metal part heavy type) incl. making connection to OH line and earth

Erection of Stays.Supplying and Erection of Galv. Stay set complete with 7/8 SWG GI (HOT Dip) Stranded stay wire (45 ton quality), 1.8 mtr.x 16 mm dia Galv. (HOT Dip) stay rod 150 mmx150 mm x8 mm thick Galv. (HOT Dip) MS anchor plate, 356 mmx13 mm dia Galv. bow (with ratchet type nut), thimble, Galv. Box type Stay Clamp in CC foundation (6:3:1) having hard jhama metal incl. providing earth connection

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 3. Cutting to requisite length or shape departmental R.S. joists,channels, angles, tees, plates etc. (Payment to be made on area of cut surface)

BUILDING WORKS. (T)MISCELLANEOUS WORKS: B. MAINTENANCE WORKS : 12)Cleaning and removing conservancy garbage mixed with rubbish & other filthy materials from the road side flank, drain and compound including cutting, loading, unloading to and from truck or cart by Mathor labour & removing the same to any distance.

Please Enable Macros to View BoQ information