Supply collection and carriage of 11.2mm gauge Bajri and Stone metal 53 to 22.4 mm guage in Ellenabad and Rania Store in Provincial Sub Division PWD BandR Br. Ellenabad in Sirsa Distt...

Amount

Collection and carriage of machine crushed bajri 11.2mm nominal size from any approved crusher zone passing 100% through 13.2mm sieve and retained on 5.6mm sieve free from dirt, clay leaves, alongated or flaky pieces soft or disintegrated stone salt, alkali,vegetable matter dust and adherent coatings. The grit shall be posses’ slow porosity and good hydrophilic characteristics that it shall have greater affinity of bitumen and shall retain a film of bitumen even in the presence of water. The absorption shall not ordinary exceed one percent. The bajri shall be supplied and stacked along road side on even ground in 2m x 1½, c 30cm stacks and fully conforming to specifications for road and bridge works issued by the Ministry of surface transport (Road wing) 5% deduction in volume computed by stacks measurements shall be made to arrive at the volume to be paid

Supply, carriage and collection of crushed or broken stone aggregate 53mm to 22.4mm gauge (G-III) from Unn or any other approved quarry in accordance with the specifications laid down in specification No. 3.64 of PWD specification 1990 1st edition and conforming to grading given in the table as given below. The material shall be stacked at Various Stores in stacks as desired by the Engineer-in-Charge. The actual volume of this aggregate deduction ten percent 10% from the volume computed by stack measurements as per clause 404. (N.S.)

H.R. Construction Co.