Revival of 220KV Samaguri-Mariani Circuit I from Loc. No. 203 to Loc. No. 545

Tower superstructures

Fabrication and supply of Galvanized Lattice steel tower super structure, ( including hangers, gussets, strain plate(Approximate HT steel =70%, MS=30%)

Galvanized nuts and bolts above

Stub Sets

Partially galvanized stub angle with cleat (HT steel=88%)

Galvanized nuts and bolts for above

Stub setting template

Stub setting template

Galvanized nuts and bolts for above

Power Conductor

ACSR Zebra Conductor

Disc Insulator Strings complete with all hardware fittings and associated clamps

120KN, Single tension disc insulator string complete with hardware fittings including tension clamp for Zebra Conductor comprising of 15 disc insulators per string

90 KN, Single Suspension disc insulator string complete with hardware fittings including suspension clamp for Zebra Conductor comprising of 14 disc insulators per string

240 KN, Double Tension disc insulator string comprising 2 string of 120 KN disc insulator complete comprising of 15 disc insulators per string (B&S type) with hardware fittings including tension clamp for Zebra Conductor.

180KN, Single Suspension disc insulator string comprising 2 string of 90 KN disc insulator complete comprising of 14 disc insulators per string (B&S type)with hardware fittings including suspension clamp for Zebra Conductor.

Stock Bridge type Vibration Damper for zebra conductor

Performed Armoured Rod

Mid span compression joint

PLCC Equipments

245kV 1-phase Capacitive Voltage transformer with all fittings and accssories including terminal connectors

Supply of new lattice galvanized steel structure for mounting of CVT

12C x 1.5 sq.mm Control cable

4C x 2.5 sq.mm Control cable

Cable glands, lugs & straight through joints for Control cables for the 220kV line Bay

Supply of 220kV, 0.5 mH, 1250 A line trap with all fittings and accessories as per specification.

Supply of HF Co-axial Cable (impedance 75 ohms)

Supply of GI angles for replacement of damaged/missing tower members

Tower and transmission line accessories

Supply of Danger plate

Supply of phase plate

Supply of Number plate

Supply of Anti Climbing Device

Item Rate BoQ

BoQ_Ver3.0

Bid reference No: AEGCL/MD/CGM(UAR)/220KV SMG-MXN/REVIVAL/2026/BID

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-1(B) Revival of 220KV Samaguri-Mariani Circuit I from Loc. No. 203 to Loc. No. 545 (F&I schedule) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Tower superstructures

Fabrication and supply of Galvanized Lattice steel tower super structure, ( including hangers, gussets, strain plate(Approximate HT steel =70%, MS=30%)

Galvanized nuts and bolts above

Stub Sets

Partially galvanized stub angle with cleat (HT steel=88%)

Galvanized nuts and bolts for above

Stub setting template

Stub setting template

Galvanized nuts and bolts for above

Power Conductor

ACSR Zebra Conductor

Disc Insulator Strings complete with all hardware fittings and associated clamps

120KN, Single tension disc insulator string complete with hardware fittings including tension clamp for Zebra Conductor comprising of 15 disc insulators per string

90 KN, Single Suspension disc insulator string complete with hardware fittings including suspension clamp for Zebra Conductor comprising of 14 disc insulators per string

240 KN, Double Tension disc insulator string comprising 2 string of 120 KN disc insulator complete comprising of 15 disc insulators per string (B&S type) with hardware fittings including tension clamp for Zebra Conductor.

180KN, Single Suspension disc insulator string comprising 2 string of 90 KN disc insulator complete comprising of 14 disc insulators per string (B&S type)with hardware fittings including suspension clamp for Zebra Conductor.

Stock Bridge type Vibration Damper for zebra conductor

Performed Armoured Rod

Mid span compression joint

PLCC Equipments

245kV 1-phase Capacitive Voltage transformer with all fittings and accssories including terminal connectors

Supply of new lattice galvanized steel structure for mounting of CVT

12C x 1.5 sq.mm Control cable

4C x 2.5 sq.mm Control cable

Cable glands, lugs & straight through joints for Control cables for the 220kV line Bay

Supply of 220kV, 0.5 mH, 1250 A line trap with all fittings and accessories as per specification.

Supply of HF Co-axial Cable (impedance 75 ohms)

Supply of GI angles for replacement of damaged/missing tower members

Tower and transmission line accessories

Supply of Danger plate

Supply of phase plate

Supply of Number plate

Supply of Anti Climbing Device

Item Rate BoQ

BoQ_Ver3.0

Bid reference No: AEGCL/MD/CGM(UAR)/220KV SMG-MXN/REVIVAL/2026/BID

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-1(C) Revival of 220KV Samaguri-Mariani Circuit I from Loc. No. 203 to Loc. No. 545 (Erection schedule) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Survey

Detail & Check survey as per specification

Construction of RCC foundation including all Labour, material equipment, excavation shuttering, head loading, back filling etc. Complete for handling, placing, leveling, curing etc. Complete inclusive of cost of transportation batching, mixing cement and reinforcement steel

Concreting

Reinforcement

Brick Soiling works

Providing brick soling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panrl after preparing the subgrade as directed including all labour and materials (a) Brick on flat soling (Area considred as per approved diagram)

Repairing of Tower Stubs damaged by corrosion and raising of coping of tower legs to prevent from further corrosion

Repairing of damaged stubs including fabrication of stubs, cleats, excavation, breaking of beam RCC portion, Pillar portion upto 0.5 m, recasting and coping of tower. Total stubs to be repaired = 226nos.

RCC work (mufflering) for raising of chimney height to above the beam level to prevent further corrosion of stubs and legs in the propotion 1:2:4 with maximum size of aggregate 12 to 38 mm stone chips providing from work including supply of labour, sand, stone, chips, cement, rods complete as directed.

Stub setting

Setting of stubs (sets of four) including transportation & distribution of stub and accessories from store to site excluding cost of excavation, concreting & back filling

Erection of superstructure

Superstructure erection including transportation of structures by any means and distribution of structure and accessories from store to site

Weilding of all nuts & bolts upto the bottom cross arm level including all charges of transportation, materials etc

Stringing

Stringing of power conductors including transportation from stores and distribution of conductors and accessories to sites and laying, stringing, tensioning , clamping, jointing, jumpering and hoisting of insulators complete including cost of all fittings and accessories not specifically mentioned elsewhere per route Km of line ( 3 conductors of line)

Erection, testing and commissioning of PLCC equipment and related services

Erection, testing and commissioning of CVT including laying of control cables as required

Erection of mounting structures as required for CVT including construction of foundations and supply of all foundation materials

Erection, Testing and Commissioning of 220kV, 05mH, 1250 A line trap with all fittings and accessories as per specification inclusive of all costs of retro-fitting if any and including supply of any materials to complete to job.

Grounding and other works

Grounding of towers with 3 metre long 25mm dia GI pipe including cost of all materials, such as GI pipes, GI bolts & nuts and washers, salt, cock etc as per specification

Painting of tower legs with Anti-rust chemical (Rustolene Spray/Equivalent) with Corrosive paint(2 coats) of approved quality upto 3 meters from the ground level including cost of paints.

Painting of tower legs with bituminous paints of approved quality upto 3 meters from the ground level including cost of paints.

Erection of Danger plates

Erection of Phase plates

Erection of Number plates

Erection of bird guard

Erection of Anti Climbing Device

Corridor clearance work

Item Rate BoQ

BoQ_Ver3.0

Bid reference No: AEGCL/MD/CGM(UAR)/220KV SMG-MXN/REVIVAL/2026/BID

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-1(D) Revival of 220KV Samaguri-Mariani Circuit I from Loc. No. 203 to Loc. No. 545 (Repairing schedule) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Repairing/Replacement of missing tower members including fabrication, cutting, making holes and fitting in tower Loc

Carrying of tower members and materials by means of transport from store to site (LS )

Loading of tower member and materials at store and un-loading near working site

Head loading of tower member/materials from roadside to working site

Item Rate BoQ

BoQ_Ver3.0

Bid reference No: AEGCL/MD/CGM(UAR)/220KV SMG-MXN/REVIVAL/2026/BID

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-1(E) Revival of 220KV Samaguri-Mariani Circuit I from Loc. No. 203 to Loc. No. 545 (Dismantling schedule) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Dismantling of existing tower and line accessories

Opening and lowering of conductors from the portion of the line to be dismantled and transportation to the store.

Opening and lowering of OPGW wire from the portion of the line to be dismantled and transportation to the store.

Back pulling of OPGW & restringing of 24 fiber OPGW (inclusive of dismantling of tension assembly & suspension assembly) between location no. 530 to 532 & 522-524

Dismantling of towers without damaging the tower members, transportation to store and proper stacking as per tower

Please Enable Macros to View BoQ information