CA NO GES U 01 2023 24 SPL REPAIR TO SECURITY WALL NEAR TIGER HILL PROVN OF PARTITION GEYSERS PVC WALL PANELLING PATHWAY ADDN ALTN TO WOODEN ALMIRAH IN BLDG NO P69 AT HQ NORTHERN COMMAND COMPLEX UNDER GE SOUTH UDHAMPUR

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

PCC 1:4:8 type B-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for walling of random rubble uncoursed well bonded bedded and solidly hearted bult in CM 1:6 complete all as specified and as directed.

Cement concrete 1:2:4 type B1 (20 mm graded crushed stone aggregate) as in coping /kerb etc including necessay form work complete all as specified and as directed.

Raised pointing to random rubble or polygonal rubble uncoursed of brought upto courses in CM 1:4 complete all as specified and as directed.

Demolition of brick or stone masonary including all necessary arches, pillars, quions etc built in cement mortar complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Demolition of cement concrtre un reinforced of any description and in any position not otherwise specially provided for complete all as specified and as directed.

Demolition of reinforced cement concrete work of any description not specifically provided including cutting down reinforcement complete all as specified and as directed.

M&L for flat form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter fair finished surfaces of concrete complete all as specified and as directed.

Reinforced cement concrete M-25 (Design mix) (using 20 mm graded crushed stone aggregate) using footing, foundation beams, plinth beam,roof beam, lintel band, retaining wall/toe wall and similar work etc. complete all as specified and as directed.

M & L for flat formwork to sides and soffits of floor or roof beams, beam haunching's, girders, bressummers, lintels, cantilevers, shelves including sup- ports , overhangs, etc also splays between floors and beams etc. complete all as specified and as directed.

RCC type M-25 mix using 20mm graded crushed stone aggregates as in beams, cantilevers, lintels over 1.5m span complete all as specified and as directed.

Use & waste of form work to pillars, coloumn and similar work etc rough finished surfaces square, retangular and polygon complete all as specified and as directed.

Reinforced cement concrete M-25 (Design mix) (using 20 mm graded crushed stone aggregate) using columns, pillars and similar work etc complete all as specified and as directed.

Mild Steel TMT bars 10 mm dia and over cut to lenth, bent to shape required, including cranking,bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

All as per Item No 18above but 5mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and as directed.

Taking down cement plaster on concrete walls including taking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Brick work with sub class 'B' brick straight or curved on plan exc 6m radius in CM 1:6 as in brick work/brick pillars etc complete all as specified and as directed.

All as per Item No 21 above but except bricks complete all as specified and as directed.

15 mm thick rendering on fair faces of brick or concrete surfaces in CM 1:4 and finishing the surfaces fair and even without using extra cement complete all as specified and as directed.

Preparation of new plaster surfaces of wall and applying two coats of cement base paint and over one coat of primers complete all as specified and as directed.

M & L for hand packing (any thickness) of broken stone or boulder at back of walls over arches etc and raising (or lowering) to the required level complete all as specified and as directed.

S & F 75mm dia PVC (SWR) pipes single stack in any length as in weepholes of retaining wall complete all as specified and as directed.

Mild Steel conforming to grade Fe-165 (Fe-290) angle post or struts in fencing fixed independently including cutting and bending to shape as directed drilling holes, notching for wire etc. complete all as specified and as directed.

Framed work such as grills, gratings & door etc. with ends of bars shouldered and/or riveted,or forged into spikes; walk ways; railings; and similar work conforming to Fe 290.Gde-E-165 complete all as specified and as directed.

Material and labour preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide chrome primer complete all as specified and as directed.

S & F galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of post including securing and tying at crossing with and provision of galvanised mild steel wire staple or steel pins etc complete all as specified and as directed. (Note :- Each line wire to be mesured).

S&F punched tape concertina coil (including spike and handle) with 50 turns and 600mm dia, width of barbed 9mm and spacing of clips 23.5mm to 24.5mm c/c weight of coil will be 10 to 14 Kg without packing. Coil length will be 6m when opened upto etc complete all as specified and as directed.

M&L for cabinet/cupboard/Alimrah of required size at site made out 18mm thick one side decorative lamination sheet consisting of carcass 18 mm thick PVC sheet & provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets 5.5 screws etc. the panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish, necessary drawer, openable shelve with frame work with locking arragement as and colour as approved by GE.

PVC steel catcher of superior quality all complete all as specified and as directed.

100 mm long stainless steel alloy handles, decorative type, complete all as specified and as directed.

Continuous (piano) hinges, brass, bright finish or electrogalvanised width of flaps when open in 30mm and fixed complete all as specified and as directed.

S&F rolled Mild steel sections as in frame work for framed work to cup board, hold fast, fixing of cup board and similar work, water stanging cage, main and cross beams hip and jack rafters, purlin fixed independently and similar work including welding & demolition of wall for fixing of hold fast as per requirement complete all as specified and as directed.

M & L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and as directed.

M&L for Reinforced cement concrete 1:2:4 type B1 , using 20 mm graded crushed stone aggregates as in slab supported on walls, beams and columns, in floors,roofs, and shelves and the like complete all as specified and as directed.

Form work to soffits of suspended slabs such as roof slabs floor slabs and similar work n. exc 200mm thick finished rough complete all as specified and as directed.

18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window sills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab complete all as specified and as directed.

Vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical surface 300x450x7mm or 300x600x7mm thick laid over 10 mm thick screed bed in CM 1:4,set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

10mm thick Toughned glass (Colour as approved by GE) as in hinged doors, partitions, automatic doors, sliding doors and similar work including cutting to shape, drilling holes, connected stainless steel handle 450mm, stainless steel clips, sliders, rollers, silicon filling etc all premium accessories and as directed.

Solid PVC Wall Lining consisting of 5mm thick wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame with 5mm thick PVC sheet fillets of width 35mm all as per specifications and drawing complete all as specified and as directed.

Venetian blinds of approved make, vertical type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc, and necessary fittings complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished , area of each tiles n exc 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer in cement mortar 1:4 complete all as specifed and as directed.

Light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished , as in vertical surface/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick screed bed or beddding layer in cement mortar 1:4 complete all as specifed and as directed.

M&L for new plaster surface of walls and applying two coat of plastic emulsion paint (Shade as approved by GE) over ar coat of primer and over two coat of wall care putty 3 mm thick with primer complete all as specified and as directed.

Surface excavation n exc. (not exceeding 30 cm deep and average 15 cm deep and getting out in hard/dense of soil complete all as specified and as directed.

M&L Hardcore of broken bricks gauge exc 63mm but n.exc 100mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rolled /rammed to true surfaces complete all as specified and as directed.

Providing 75 mm thick cement concrete 1:4:8 type D2 using 20 mm graded crushed stone aggregate as in sub base for hard paved area complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for screed bed or bedding layers of 15 mm thick cement mortar 1:3 for laying floor finishes complete all as specified and as directed.

25 mm thick PCC type B0, 1:2:4 using 12.5mm graded crushed stone aggregate as in sub base for laying floor finishes complete all as specified and as directed.

Vitrified Dura stone tiles of size 300 x 300 x 10mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

PCC 1:2:4 type B-1using 20mm graded crushed stone aggregate as in coping , benching , bed blocks etc complete all as specified.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly complete all as specified and as directed. Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish.

All as per srl item No 60 above but for 3 pin 5 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly completed all as specifie and as directed.

All as per srl item No 60 but for 3 pin 6 Amps socket outlet on the same board including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly completed all as specified and as directed.

All as per Srl item No 60 but for 3 Pin 15 Amps socket outlet independent with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly completed all as specified and as directed.

S&F for modular switch 6 Amps single pole one way 230 volt with outer strip complete all as specified and as directed.

S&F for modular switch 16 Amps single pole one way 230 volts with outer strip complete all as specified and as directed.

S&F Modular socket 3 Pin 6 Amps flush type with outer strip complete all as specified and as directed.

S&F Modular socket combined 2-in-1, 6 Pin 6 & 16 Amps flush type with outer strip complete all as specified and as directed.

S&F Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Block complete all as specified and as directed.

S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 12 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed.

FMCB Single pole and neutral 240 volt any rating from 40 amps , with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed.

S & F MCB single pole 240 volt any rating from 10 to 40 amps 'C' series, with rupturing capacity 10 KA inculding providing thimble for out going cable complete all as specified and as directed.

S&F single pole and neutral enclosure surface mounted 240 voltswith 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator of complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead complete all as specified and as directed.

Supply and fixing electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc. complete all as specified and as directed.

S & F in repairs LED Decorative, wall mounting, good finish fixture with plastic body suitable for 9 W LED lamp B22 base.with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fixing exhaust fan, steel body AC single Phase, 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection complete all as specified and as directed.

Material & Labour for Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 4 Sqmm x 2 core size all as specified including taking down old cable.Note : Earth work and other connected work shall be measured & paid sperately completed all as specified and as directed.

vijay constrction co

khajuria builders

vmd traders

M/S ASHOK KUMAR PACHIALA

SINGH CONST CO

BHAGWATI TRADERS

VIRINDER SINGH

RAMAN CONSTRUCTION CO