Loading
Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹3.5 L
Closing Date
17 Aug 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
GENERAL
15 conditions · 2 needing a document upload
The Tenderer shall be eligible only if he fulfils the following Standard Financial Eligibility Criteria FOR WORKS COSTING ABOVE Rs.50.00 LAKHS: The tenderer must have minimum average annual contractual turnover of V/N or V "whichever is lesser"; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total Contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per AnnexureVIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by the audited balance sheet
The tenderer must have successfully or substantially completed during last 07 (Seven) years, ending last day of month previous to the one which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Note: Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender
Tenderer shall carefully read clause No. 10 including clause no. 10.1 to 10.5 of IRGCC April 2022.
Defination of Similar Work :- Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc (with or without supply of items / equipments) for 230 Volts, 1 phase or 415V, 3 phase system or higher voltages.
42 conditions · 29 needing a document upload
The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.. Necessary documents to this effect as applicable, as given in "GENERAL INSTRUCTIONS" below and as per Clause No. 14 of tender form (second sheet) of Tender Document to be uploaded.
Documents to fulfil Technical Eligibility criteria as per GCC
Documents to fulfil Financial Eligibility criteria as per GCC
Electrical License as per tender conditions.
In case of other than company/proprietary firm , annexure V (A) shall also be submitted by each member of a partnership firm/ Joint Venture(JV)/Hindu United Family (HUF)/ Limited liability partnership(LLP) etc., as the case maybe. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document
Power of attorney duly stamped and authenticated by a Notary Public or by Magistrate as per Tender conditions.
The tenderers are advised to download and carefully read the Tender Document attached with this Notice Inviting tender.
Documents to evaluate bid capacity as detailed as Annexure-VI as per ACS 1 to GCC 2022 , duly verified by Chartered accountant.(for tenders having advertised value more than 20 Crore)
Tenderers are advised to submit all the documents required to be uploaded by them in Kannada/Hindi/English. Documents uploaded in any other language shall be translated Kannada/Hindi/English and attested copy may be uploaded for better appreciation of the tender.
Mandatory documents that are to be uploaded without which the bid will be summarily rejected are mentioned in Chapter II of the Tender Document attached with this Notice Inviting Tender.
Participation of Joint Venture firms is applicable in tenders having value more than Rupees 10 Crore and is governed by GCC for Works 2022 with latest amendments and correction slips.
CORRIGENDUM NOTICE ON IREPS: Railway may modify the tender document by issuing online corrigendum through "www.ireps.gov.in" 15 days prior to the tender closing date. For the purpose of CORRIGENDUM in the tender, NIT period is split as under: (a) ADVERTISEMENT PERIOD: The time during which all No information pertaining to tender shall be available but offers cannot be submitted (b) OFFER SUBMISSION PERIOD: 15 days prior to closing of tender, during which tenderers can submit their offer
The tenderers are advised to carefully read this tender Document (Chapter I to V) in conjunction with Indian Railways Standard General Conditions of Contract- April 2022 with latest No amendments and correction slips before participating in this Tender.
The rates quoted for the relevant supply items of work shall include the cost of materials and their accessories. Similarly, for fixing/installation/erection/ Testing and Commissioning item of work shall include the cost of labour, together with the cost of providing the necessary tools and tackles etc., so as to ensure that the work carried out forms a complete supply, installation, Testing, commissioning of item work to the satisfaction of the Engineer-in-charge.
The prices quoted shall be net including all taxes and duties etc.
Documents to be Submitted Along with Tender (i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company/Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case maybe. (ii) Following documents shall be submitted by the tenderer: (a)Sole Proprietorship Firm: (i)All documents in terms of Para 10 of the Tender Form (Second Sheet).
Following documents shall be submitted by the tenderer: if HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet)
Following documents shall be submitted by the tenderer: if Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet)
Following documents shall be submitted by the tenderer: if LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders/contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were are partners/members. Concealment /wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet).
Following documents shall be submitted by the tenderer: if Registered Society & Registered Trust: The tenderer shall submit: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet).
The following documents shall be submitted by the partnership firm, with the tender: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry/Department of the Govt. of India from participation in tenders /contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet)
The tenderers are advised to upload all required documents mentioned in this Notice Inviting Tender as well as in the Tender Document (Tender forms) (Chapter I to V) along with the bid.
The schedule given in this NIT shall be read in conjunction with technical specifications/ explanatory notes and drawings given in the Tender document attached with this Tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Electrial arrangements for construction of new running room at DPJ,HSRA,BID,HUP and crew lobby at YNK
BE29-2026-27-OT-04
BE29-2026-27-OT-04
Open
Works - General
24 Months
Unknown (Unspecified Location)
₹0
₹3.5 L
17 Aug 2026
21 Jul 2026
3 Aug 2026
338 items across 5 schedules · ₹1,76,18,426 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Excavation and closing of cable trench in all types of soil, 1000 mm. depth, 450 mm..wide and refilling trench with excavated soil, ramming, consolidating and bringing the surface to its original level including supply of all required materials. | Metre | 450.00 | 216 | 97,200 |
| 2 | Cutting of RCC foundation/Tar road ,excavation of cable trench of one feet depth & one feet width a n d refilling trench with excavated soil, ramming, consolidating and bringing the surface to its original level with suitable cement mixer/tar etc as per site condition. | Metre | 50.00 | 463 | 23,150 |
| 3 | Supply of HDPE pipe of 110mm outer dia PE-80, PN-6 , with proper jointing , bends, clamps etc., as per site condition with all necessary accessories. | Metre | 1000.00 | 479 | 4,79,000 |
| 4 | Uncoiling, stretching and laying above 110mm HDPE pipe in the trench | Metre | 1000.00 | 24.5 | 24,500 |
| 5 | Uncoiling, stretching and laying of upto 4 core 25-120Sqmm LTUG cable in the trench/duct as per site condition through suitable HDPE pipe with proper terminations and handing over of released Cable/materials if any to concerned power depot incharge with proper account . (LTUG/HTUG cable alone will be supplied by railways to be collected at railway store) | Metre | 1000.00 | 37 | 37,000 |
| 6 | Supply of HDPE pipe of 40mm outer dia PE-80, PN-6 , with proper jointing , bends, clamps etc., as per site condition with all necessary accessories. | Metre | 100.00 | 101.7 | 10,170 |
| 7 | Uncoiling, stretching and laying of above 40mm HDPE pipe in the trench | Metre | 100.00 | 11.4 | 1,140 |
| 8 | Uncoiling, stretching and laying of upto 4 core 35 Sqmm LTUG cable in the trench/duct as per site condition through suitable HDPE pipe with proper terminations and handing over of released Cable/materials if any to concerned power depot incharge with proper account . (LTUG/HTUG cable alone will be supplied by railways to be collected at railway store) | Metre | 100.00 | 31 | 3,100 |
| 9 | Supply & fixing of class 'B' G.I. pipe 80 mm dia on track/pole/wall/drain crossing/cable raising with necessary clamping arrangements for UG cable including cost of all materials, labour charges complete | Metre | 12.00 | 1,026 | 12,312 |
| 10 | Supply and installation of enclosure for MCCB upto FP 250A capacity with provision for wall mounting glands , inbuilt neutral link , IK08 , IP30 sufficient space for cable termination with all necessary accessories as per site condition. | Numbers | 2.00 | 5,558 | 11,116 |
| 11 | "Supply and Provision of FP MCCB of 160A rating having shortcircuit breaking capacity of 25KA with adjustable thermal magnetic protection" | Numbers | 2.00 | 8,644 | 17,288 |
| 12 | Fabrication, Supply, erection, testing and commissioning of out door LT panel with sheet steel of 16 SWG thickness consisiting of incoming 125A FP Onload Change over switch -1 No, 125A FP adjustable thermal and mangetic setting MCCB 25 KA.-1No and out going FP 63A 25KA MCCB-4 Nos as outgoing, with suitable copper bus bars,RYB indication lamps, suitable cable alleys including all heat shrinkeable sleeves,flexible Cu wires, lugs, sleeves, terminals & PVC troughs as per site condition. | Numbers | 2.00 | 1,27,191 | 2,54,382 |
| 13 | Design,supply and erection of earthing arrangement material with 50mm dia, class C, GI pipe including all auxilliary accessories as per drawing and specification. | Numbers | 8.00 | 4,744 | 37,952 |
| 14 | Supply and laying 25mm x 5mm G.I strip as strip earthelectrode, including connection/terminating with G.I nut, bolt, spring, washer etc. as required.(Jointing shallbe done by overlapping and with 2 sets of G.I nut bolt& spring washer spaced at 50mm) | Metre | 40.00 | 169 | 6,760 |
| 15 | Supply and extension of earth continuity from earth pit to metering bunk by 8 SWG GI wire including all auxilliary accessories. | Metre | 120.00 | 20 | 2,400 |
| 16 | Laying and fixing of one number PVC insulatedand PVC sheathed / XLPE power cable of 1.1KVgrade of size upto 35 Sqmm clamped with 1mmthick saddle on wall surface/cable tray as required/in the existing cable tray . ( LTUG cable alone will besupplied by Railways to becollected at railwaystore) | Metre | 100.00 | 63 | 6,300 |
| 17 | Supply and fixing of 150mm width x50mm depthx 1.6mm thickness perforated Hot Dipped Galvanised Ironcable tray joined with connectors, suspended fromceiling with G.I suspenders ,supporting barckets,fasteners etc., or welding on L angle for holding of cable tray with allnecessary accessories as per site condition. | Metre | 50.00 | 803 | 40,150 |
| 18 | Supply and installation of ready to useIP54 , 6 way VTPN DB made out of CRCAsheet steel , powder coated with insulatedphase busbar, color coded interconnectingwire set , locking arangement completesuitable for provision of FPMCB/RCCB/RCBO as incomer and TP/SP MCBs as outgoings including allaccessories for fixing as per site condition. | Numbers | 6.00 | 20,508 | 1,23,048 |
| 19 | Supply and Provision of FP MCB of 40/50A rating with shortcircuit breaking capacity of 10KA. | Numbers | 6.00 | 1,729 | 10,374 |
| 20 | Supply and Provision of FP MCB of 6A-32A rating with shortcircuit breaking capacity of 10KA. | Numbers | 6.00 | 1,479 | 8,874 |
| 21 | Supply and installation of IP43 , 8way SPN DB made out of CRCA sheetsteel ,powder coated with insulated phase busbar, color coded interconnecting wire set , locking arangement complete suitable for provision of DPMCB/isolator/RCCB/RCBO as incomer and SP MCBs as outgoings includingall accessories for fixing as per site condition. | Numbers | 20.00 | 2,587 | 51,740 |
| 22 | Supply and Provision of DP MCB of 6A-32A rating with shortcircuit breaking capacity of 10KA. | Numbers | 20.00 | 538 | 10,760 |
| 23 | Supply and provision of DP RCCB of 25A rating having sensitivity of 100mA | Numbers | 20.00 | 1,949 | 38,980 |
| 24 | Supply and Provision of SP MCB of 6A-32A rating with shortcircuit breaking capacity of 10KA. | Numbers | 80.00 | 154 | 12,320 |
| 25 | Supply and Wiring for circuit/ sub main wiring alongwith earth wire with 2x1.5Sq.mm+ 1x1.5Sq.mm earth wire of FRLS PVC insulated copper conductor , single core cable in surface/recessed medium class PVC conduit/casing and capping including supply and laying of PVC conduit/casing and capping with a l l accessories like round block, ceiling rose, flexible wire for connecting lights,fan fittings etc as per specification. ( PVC conduit/casing and capping to be used as per site condition.) | RM | 1900.00 | 267 | 5,07,300 |
| 26 | Supply and Wiring for circuit/ sub main wiring alongwith earth wire with 2x2.5Sq.mm+ 1x2.5Sq.mm earth wire of FRLS PVC insulated copper conductor , single core cable in surface/recessed medium class PVC conduit/casing and capping including supply and laying of PVC conduit/casing and capping with all accessories like round block, ceiling rose, as per specification. ( PVC conduit/casing and capping to be used as per site condition.) | RM | 400.00 | 311 | 1,24,400 |
| 27 | Supply and Wiring for circuit/ sub main wiring alongwith earth wire with 2x4 Sq.mm + 1x4Sq.mm earth wire of FRLS PVC insulated copper conductor , single core cable in surface/recessed medium class PVC conduit/casing and capping with cable termination using suitable crimping socket i n c l u d i n g supply and laying of PVC conduit/casing and capping. Vertical Runs of Light & Fan Circuit can be bunched with Circuit mains by suitable Junction Boxes as per specification( PVC conduit/casing and capping to be used as per site condition.) | RM | 1250.00 | 373 | 4,66,250 |
| 28 | Supply and Wiring for circuit/ sub main wiring alongwith earth wire with 2x6 Sq.mm + 1x6Sq.mm earth wire of FRLS PVC insulated copper conductor , single core cable in surface/recessed medium class PVC conduit/casing and capping with cable termination using suitable crimping socket i n c l u d i n g supply and laying of PVC conduit/casing and capping. ( PVC conduit/casing and capping to be used as per site condition.) | RM | 900.00 | 482 | 4,33,800 |
| 29 | Supply and Wiring for circuit/ sub main wiring alongwith earth wire with 4x6 Sq.mm + 2x6Sq.mm earth wire of FRLS PVC insulated copper conductor , single core cable in surface/recessed medium class PVC conduit/casing and capping with cable termination using suitable crimping socket i n c l u d i n g supply and laying of PVC conduit/casing and capping. ( PVC conduit/casing and capping to be used as per site condition.) | RM | 120.00 | 813 | 97,560 |
| 30 | Supply and Wiring for circuit/ sub main wiring alongwith earth wire with 4x10 Sq.mm + 2x6 Sq.mm earth wire of FRLS PVC insulated copper conductor , single core cable in surface/recessed medium class PVC conduit/casing and capping with cable termination using suitable crimping socket including supply and laying of PVC conduit/casing and capping. ( PVC conduit/casing and capping to be used as per site condition.) | RM | 120.00 | 1,078 | 1,29,360 |
| 31 | Groove cutting & Fixing of above conduit duly concealed in wall / ceiling | Metre | 2000.00 | 20 | 40,000 |
| 32 | Supply and fixing of modular type concealed metal switch box for 12 modules complete with mounting cover plate of suitable colour& texture as per site condition including all accessories. | Numbers | 40.00 | 512 | 20,480 |
| 33 | Supply and fixing of modular type concealed metal switch box for 8 modules complete with mounting cover plate of suitable colour& texture as per site condition including all accessories. | Numbers | 21.00 | 358 | 7,518 |
| 34 | Supply and fixing of modular type concealed metal switch boxes for 4 modules complete with mounting cover plate including all accessories. | Numbers | 29.00 | 135 | 3,915 |
| 35 | Supply and provision of 6A SP modular switches ISI marked | Numbers | 412.00 | 54 | 22,248 |
| 36 | Supply and provision of 2 way 5/6ASP modular switches ISI marked | Numbers | 60.00 | 156 | 9,360 |
| 37 | Supply and provision of 32A DP switch with neon indication , ISI marked | Numbers | 40.00 | 310 | 12,400 |
| 38 | Supply and provision of 6A modular socket with safety shutter ISI marked | Numbers | 55.00 | 156 | 8,580 |
| 39 | "Supply and provision of USB Type-A Charger, Single Port(2.1A, 5V DC), 1 Module (CRS Certified) in the existing switch board " | Numbers | 30.00 | 1,110 | 33,300 |
| 40 | Supply and provision of 6 / 16A modular multi pin socket with ISI mark, safety shutter and 16A switches with neon indication with ISI mark. | Numbers | 24.00 | 575 | 13,800 |
| 41 | "Installation and commissioning of Split AC (Excluding accessories )as instructed by SSE incharge .The scope of work includes the following. a) Mounting/Fitting of indoor and outdoor units at the respective locations. b) Laying of refrigerant piping and connecting with indoor and outdoor units after drilling hole/holes in the wall, if required. c) Charging Refrigerant gas in the unit. d) Suitable electric wiring between indoor unit and switch upto 3 meters length. e) Testing for satisfactory working without any abnormal noise as well as leakage test of entire system. " | Numbers | 21.00 | 2,075 | 43,575 |
| 42 | "Supplying, Installation, Testing, Commissioning of 500 LPD capacity Evacuated Tube Collector (ETC) Solar Water Heating System comprising of all glass ETC tube absorber. The inner layer of absorber shall be of solar selected absorbing coated tube, Vacuum jacket, cover glass tube, getter and getter mirror surface, as per IS 16543. The system shall have temperature gauges, strainer, 2 nos. water meters, Suitable capacity cold and hot water tank, all MS structure for installation including suitable electric control panel complete with control and power wiring, necessary plumbing including piping for cold and hot water line between tank and solar water system, water heater and thermostat including non-return valve, float valve and other valve etc. as required. The various component shall have following specification. 1. The Absorber area i.e. the number, dimension and thickness of solar evacuated tube as per IS:16544 clause 5.4 and IS: 16543 clause 4.2 2. Boro Silicate Glass 3.3 for cover plat as per ISO: 3585. 3. The material for three target coating shall be aluminum nitrate, aluminum nitrate stainless steel and copper multi layer selecting coating as per IS: 16543. 4. Manifold shall be of Mild steel section with PP coating and Inner material shall be of SS304. 5. Recommended operating pressure:10 Bars. 6. The capacity of hot water tank shall be minimum 1.5 times the rated capacity system. Inner Material shall be Stainless Steel SS 316 b) as per IS 1730 grade SS304-2B (22SWG). The hot water tank shall be insulated with high density injected PUF insulation 50 mm thickness between inner and outer tank. Tank stand shall be of mild steel and shall be design to withstand wind velocity of 100km/hours (minimum) or more as per site. 7. Suitable nos. ISI Marked electrical heaters along with control panel, with suitable breaker, all protections, and all safety provisions so as to achieve 60 degree C temperature rise in an hour.The range of thermostat shall be upto 80 degree C. " | Numbers | 2.00 | 90,626 | 1,81,252 |
| 43 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required | Numbers | 39.00 | 1,806 | 70,434 |
| 44 | Supply and fixing of 20 Watt , 230 Volt AC supply ,50 Hz batten type aluminium extruded 4 feet LED light fitting along with lamp & driver with all connected materials( Ceiling rose, round block,screws,guttas, round flexible wire etc.) and conforming to specification No.SWR /LED LIGHT FITTING(Indoor/Out door)/001-2016 dt 18.04.16 | Numbers | 65.00 | 429 | 27,885 |
| 45 | Supply and fixing of 2/3W LED foot light flush mount type with all necessary accessories. | Numbers | 30.00 | 687 | 20,610 |
| 46 | Supply and fixing of 9/10 Watt , 230 Volt AC supply ,50 Hz batten type aluminium extruded 2 feet LED light fitting along with lamp &driver with all connected materials( Ceiling rose, roundblock,screws,guttas, round flexible wire etc.) and conforming to specification No.SWR /LED LIGHT FITTING(Indoor/Outdoor)/011-2016 dt 18.04.16 | Numbers | 20.00 | 300 | 6,000 |
| 47 | Supply and fixing of 5 star r a t e d 1200 mm sweep BLDC ceiling fan with suitable remote, fan hooks with all necessary accessories as per specification | Numbers | 48.00 | 2,882 | 1,38,336 |
| 48 | Supply and fixing of slim surface/recess panel 12/15W LED down light CW/WW fitting with driver and conforming to specification No.SWR /LED LIGHT FITTING(Indoor/Out door)/011-2016 dt 18.04.16 | Numbers | 18.00 | 878 | 15,804 |
| 49 | Supply and fixing of 36W panel light fitting cool white type recess/surface mounted , 600mmx600mm with housing made of pressure die cast aluminium alloy corrosion resistant powder coated with driver and conforming to s p e c i fi c a t i o n No.SWR /LED LIGHT FITTING(Indoor/Out door)/001-2016 dt 18.04.16 | Numbers | 18.00 | 2,076 | 37,368 |
| 50 | Supply and fixing of 3W LED reading lamp with all acessories ( necessary approval is to beobtained from SSE inchrage duly supplying sample fitting) | Numbers | 30.00 | 755 | 22,650 |
| 51 | Supply and provision of asthetically good looking wall lamp with LED lamp fitting with all necessary accessories. | Numbers | 18.00 | 2,325 | 41,850 |
| 52 | Supply and fixing of recess/surface mounted 6W LED down light fitting with driver and conforming to specification No.SWR /LED LIGHT FITTING(Indoor/Out door)/011-2016 dt 18.04.16 | Numbers | 20.00 | 415 | 8,300 |
| 53 | Supply and fixing of aesthetic LED mirror light of 10/12Watts with driver and all necessary accessories. | Numbers | 19.00 | 1,428 | 27,132 |
| 54 | Supply and fixing of modular type Exhaust fan of sweep 150mm including clamps and all necessary accessories for fixing. | Numbers | 17.00 | 1,060 | 18,020 |
| 55 | Supply of BLDC 225 MM Heavy Duty Exhaust Fan, Operating Voltage 230 V Ac Single Phase 50 HZ. Rated Speed 900 RPM, Power rating of 12W, Rated Air Delivery 600 CMH, Having Power Factor > 0.9, Metalic Blade And Body with all necessary accessories for fixing. | Numbers | 2.00 | 3,721 | 7,442 |
| 56 | Installation of exhaust fan in the existing opening as per site condition . | Numbers | 2.00 | 397 | 794 |
| 57 | Supply and provision of flying insect control trap wall mount type with metal body , UV lamps of 40W , volume of mosquito killing chamber -100, suitable for effective area of 400-600Sqmtrs including all necessary accessories. | Numbers | 2.00 | 3,000 | 6,000 |
| 58 | Supply of storage type water Geyser of 15 litres capacity, BEE 5 star rated with ABS body, stainless steel tank , pressure safety relief valve, as per IS 2082:2018 latest , 2 meter cable with 3 pin plug 16A with all necessary accessories for fixing. | Numbers | 15.00 | 7,870 | 1,18,050 |
| 59 | Fixing and connecting of above geyser as per site condition. | Numbers | 15.00 | 304 | 4,560 |
| 60 | Supply and provision of infrared motion sensor 360 degree detection, range upto 12m distance , IP 20 ,capacity upto 300W with all necessary accessories. | Numbers | 8.00 | 993 | 7,944 |
| 61 | Supply,installation, Programming and commissioning of wireless ceiling/wall mounted wireless battery powered passive infrared (PIR) sensor that automatically control lights/other loads via RF communication to compatible dimming and switching devices with all necessary accessories. The sensors should not interfere with any other wireless devices. | Numbers | 8.00 | 8,068 | 64,544 |
| 62 | Supply, installation, programming and commissioning of Standalone single circuit switching module ( relay for above sensor)of 16/20A capacity mounted in the true ceiling/wall. This should not interfere with any other wireless devices | Numbers | 6.00 | 8,539 | 51,234 |
| 63 | "Supply & erection of 5m long hot dip galvanized octagonal pole with 130mm bottom A/F and 70mm top A/F, made up of 3mm thick HT Sheet & Bakelite sheet & suitable MCB including suitable size of loop-in & loop-out connectors(for mounting inside the base compartment of pole with hinged door opening arrangements), with base plate of size 200x200x12mm, M16X600 long 'J' type EN8 grade foundation bolts, with 1000mm double arm bracket for fixing of LED light with all connected accessories,etc." | Numbers | 3.00 | 8,933 | 26,799 |
| 64 | Excavation of pit for octagonal pole/ poles of suitable size in all types of soils as per the direction of engineer at site | Numbers | 3.00 | 925 | 2,775 |
| 65 | Provision of concrete foundation and constructing the plinth as per the directions of engineer at site. | cum | 1.50 | 3,703 | 5,554.5 |
| 66 | Supply and fixing of 45 Watt ,230 Volt AC,50 Hz, IP66 L E D street light fitting along with lamp & driver with all connected materials for proper fixing and alignment conforming to specification No.SWR /LED LIGHT FITTING(Indoor/Out door)/011-2016 dt 18.04.16 | Numbers | 5.00 | 2,862 | 14,310 |
| 67 | Design, Supply and erection of single side cross arm for holding street light fittings including all auxiliary accessories for fixing/ welding as per site condition. | Numbers | 2.00 | 693 | 1,386 |
| 68 | Supply, installation, testing & commissioning of outdoor type LED Glow sign boards/Pictorial signage boards with suspension/side mounting/wall mounting type arrangements as required. (Final dimensions and lettering , pictures will be as advised by SSE incharge) | Square Foot | 100.00 | 946 | 94,600 |
| 69 | Design , supply and installation of 8W/9W Bollard type Aesthetically designed ,aluminium ,landscape warm white LED luminaire ,IP65 all necessary accessories conforming to s p e c i fi c a t i o n No.No.SWR /LED LIGHT FITTING(Indoor/Out door)/011-2016 dt 18.04.16. | Numbers | 15.00 | 4,399 | 65,985 |
| 70 | Supply and laying of 3 core , 4Sqmm flat cable HRPVC insulated and sheathed with multistrand flexible EC grade copper conductor for submersible pumps | Metre | 100.00 | 186 | 18,600 |
| 71 | Excavation and closing of cable trench in all types of soil, 500 mm. depth, 225 mm..wideand refilling trench with excavated soil, ramming, consolidating and bringing the surface to its original level including supply of all required materials. | Metre | 75.00 | 114 | 8,550 |
| 72 | Supply and laying of industrial CPVC conduit of 1 inch dia on the wall with saddles/ in soil with all necessary accessories as per site condition. | Metre | 75.00 | 140 | 10,500 |
| 73 | Supply and fixing of industrial grade out door IP54, shock proof,rust proof, fire retardant, with cable entry for bottom and/or sides, locking arrangement three phase junction box with loop in loop out arrangement ,cable glands ,connectors , 6A DP MCB , minimum inner dimensions 295x195x100mm , all necessary accessories for fixing on pole/wall/G.I pipe as per site condition | Numbers | 2.00 | 1,113 | 2,226 |
| 74 | Design, supply and fixing of weather proof, shock proof, meter box with necessary terminal strip and CT mounting arrangement for housing the ETV Meters and connecting to the existing ground. Including supply and provision of Electronic Trivector Meter 3 Phase, 4 Wire, 0.5 Accuracy Class, CT operated,LT CT's 0.5 Accuracy Class Ring Type Ratio 100/5 -3 nos including all accessories for fixing of meter box as per site condition | Set | 1.00 | 10,365 | 10,365 |
| Schedule total | ₹44,31,721.5 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACS10.pdf
ATTACHMENT
GCC_-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf IR GCC APRIL 2022.
ATTACHMENT
ACS1TO6fullMRC_1.pdf
ATTACHMENT
Annx.Vasperacs4REVISED_FORMAT_FOR_CERTIFICATE_3.pdf Annexure V LATEST
ATTACHMENT
ACS789_MR.pdf
ATTACHMENT
JPO_compressed_2.pdf
ATTACHMENT
corrigendum-tenderdocument.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
GCC_-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
Annx.Vasperacs4REVISED_FORMAT_FOR_CERTIFICATE_3.pdf
ATTACHMENT
corrigendum-tenderdocument.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .