GE/BAS-60/2022-23 REPAIR AND MAINTENANCE OF INTERNAL WIRING INCLUDING INTERNAL FITTING FIXTURES CEILING FANS EXHAUST FANS WALL MOUNTING FANS AND ITS ALLIED SERVICES AT BASOLI UNDER GE BASOLI

Amount

Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with pressed mild steel terminal boxes(sheet not less than 1.6 mm thick) duly painted with a coat of red oxide primer with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge.Note: a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc complete all as per specified and directed.

All as per item No 2 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed.

All as per item No 2 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed.

All as per srl item No 2 here in before but one bell/buzzers point controlled by one push button on the same board with other inner switches or independent with cable 1.5 sqmm size complete all as per specified and directed.

M&L for Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as per specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in existing conduit concealed and sunk cast iron/pressed steel terminal boxes painted duly painted with a coat of red oxide primer with replacement of suitable thickness3mm plastic laminated sheet cover of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as per specified and directed..

All as per item No 7 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed..

All as per item No 7 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed..

All as per srl item No 7 here in before but one bell/buzzers point controlled by one push button on the same board with other inner switches or independent with cable 1.5 sqmm size complete all as per specified and directed.

M&L for Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in existing concealed conduit and sunk cast iron/pressed steel terminal boxes duly painted with a coat of red oxide primer with replacement of suitable thickness3mm plastic laminated sheet cover with suitable size for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm multistrand copper conductor cable FRLS PVC insulated and unsheathed Cable as earth wire to common earth dolly, complete all as per specified and directed.

Supplying & Fixing switch piano flush button single pole one way 5 amps 230 volts, complete all as per specified and directed.

Supplying & Fixing socket outlet 5 amps 5 pin flush type, 230 volts, complete all as per specified and directed.

Supplying & Fixing Switch socket combination 2 in 1, 5 pin, 5 Amp flush type complete all as per specified and directed..

Supplying & Fixing switch piano flush button single pole one way 15 amps 230 Volts, complete all as per specified and directed.

Supplying & Fixing socket out let, 6 pin, 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts, complete all as per specified and directed.

Supplying & Fixing in Switch socket combination 2 in 1, 6 pin, 5 and 15 Amp flush type universal complete all as per specified and directed..

Supplying & Fixing Switch Bell push, flush type, 5 amp one way complete all as per specified and directed.

S&F fan regulator electronic flush type stepped (rotary type) with 5 steps speed control complete all as per specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed.

S&F ceiling rose surface bake lite two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.

S&F in replacement LED tube light fitting 20w,230v, including LED 4 feet Batten type fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as per specified and directed.

S&F in replacement LED tube light fitting 1x20w,230v, including LED tube rod with polycarbonate diffuser,4 feet industrial patti type fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as per specified and directed.

S&F in replacement Bldg security LED light 25 watt with including brackets and fixing arrangement with clamps necessary nuts bolts and washers complete all as per specified and directed.

S&F in replacement LED recess mounting powder coated white CRCA full glow panel 45 watt 2x2 ft incorporated with all fixing arrangements complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as per specified and directed.

S&F in replacement LED recess mounting powder coated white CRCA full glow pane 28 watt 1x2 ft incorporated with all fixing arrangements complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as per specified and directed.

S&F in replacement LED surface mounting powder coated white CRCA full glow panel 15 watt 1x1 ft incorporated with all fixing arrangements complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as per specified and directed.

S&F in replacement LED recess mounting highily efficient downlighter 15 watt 145/175mm dia height 45/55 mm incorporated with all fixing arrangements complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as per specified and directed.

S&F in replacement decorative wall mounting light fitting made up of poly carbonate suitable for retrofit with LED 7/9 watt LED lamp with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as per specified and directed. NOT: The cost of LED lamp is included in quoted rates.

Supply and fixing wall mounted LED bulk head fittings, 10 watt, warm white,, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with three core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as per specified and directed.

S&F in replacement sheet metal powder coated VTPN DB double door 4 way with MCCB 63/100 amps, 415 Volts, 50 Hz AC 16 ka 4 pole with copper bus bar rated 200 amps neutral link, earth bar and din rail for fixing the MCB,s complete all as per specified and directed. Note :-MCB,s Shall be measured and paid seperately in relevant item.

S&F in replacement MCB TPN 100 Amps with 10 KA breaking capacity in distribution boards complete all as per specified and directed.

S&F in replacement MCB TPN 63 Amps with 10 KA breaking capacity in distribution boards complete all as per specified and directed. Make - Legrand /C&S / IndoAssian/Benlo

S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (TPN) distribution board for MCB provisions 415Volt, 50Hz AC supply for 04 way. fitted with copper bus bar rated 200amps, neutral link , earth bar complete all as per specified and directed.

S&F in replacement sheet metal powder enclosure powder coated versatile double door 4way (SPN) distribution board for MCB provisions 230Volt, 50Hz AC with neutral link , earth bar complete all as per specified and directed.

Ditto- as above herein before but (SPN) DBs 08 way complete all as per specified and directed.

Ditto- as above herein before but (SPN) DBs 12 way complete all as per specified and directed.

Ditto- as above herein before but with single cover (SPN) DBs 02 way complete all as per specified and directed.

S&F MCBs single pole and neutral (SPN) 63 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as per specified and directed.

S&F in replacement MCBs single pole (SP) 5 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as per specified and directed.

S&F in replacement MCBs single pole and neutral (SPN)/isolator 6-32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as per specified and directed.

S&F in replacement MCBs single pole and neutral (SPN)/isolator 40 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as per specified and directed.

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as per specified and directed. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

-ditto- as above herein before but with 2 run of 6.0 Sqmm and one run of 6.0 Sqmm as earth continuity conductor(green colour) complete all as per specified and directed.

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into existing PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :(i) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

-ditto- as above herein before but with 2 run of 6.0 Sqmm and one run of 6.0 Sqmm as earth continuity conductor(green colour) complete all as specified & directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthling wire .)

Taking out old UNSV existing board including any type of civil work Brick work, plastering, grouting to match with the existing no amount shall be paid extra for proper finish and for white wash after finish complete all as per specified and directed.

S&F in replacement switch piano flush button single pole one way 5 amps 230 volts, complete all as per specified and directed..

S&F in replacement socket outlet 5 amps 5pin flush type, 230 volts, complete all as per specified and directed.

S&F in replacement switch piano flush button single pole one way 15 amps 230 Volts, complete all as per specified and directed.

S&F in replacement socket out let, 6 pin, 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts, complete all as per specified and directed.

S&F in replacement Switch socket combination 2 in 1, 6 pin, 5 and 15 Amp flush type universal complete all as per specified and directed.

S&F in replacement Switch socket combination 2 in 1, 5 pin, 5 Amp flush type complete all as per specified and directed.

S&F in replacement Switch Bell push, flush type, 5 amp complete all as per specified and directed.

S&F in replacement ceiling rose surface bakelite 2 to 3 terminals, complete all as per specified and directed.

S&F in replacement Lamp holder insulated body with back plate for batten fittings, complete all as per specified and directed.

S&F in replacement fan regulator electronic flush type stepped (rotary type) with 5 steps speed control complete all as per specified and directed.

S&F in replacement electric bell ding dong AC single phase 220 volts, complete all as per specified and directed.

S&F in replacement plug top 3 pin 5 amps AC 230 volts complete all as per specified and directed.

S&F in replacement plug top 3 pin 15 Amps AC 230 volts complete all as per specified and directed.

Supplying only LED bulb of capacity 7 watts complete with all accessories base (ISI marked) complete all as per specified and directed.. Make Bajaj/Philips or its equivalent Note :-Items shall be taken on charge by the stock holder

Supplying only LED bulb of capacity 9 watts complete with all accessories base (ISI marked) complete all as per specified and directed. Make Bajaj/Philips or its equivalent Note :-Items shall be taken on charge by the stock holder

Supplying only LED Tube 4 feet long of capacity 20 watts complete with all accessories base (ISI marked) complete all as per specified and directed. Make : Crompton / Philips/Wipro or its equivalent. Note :-Items shall be taken on charge by the stock holder

M&L for taking down replacement the existing faulty single phase tamper proof Electronic Energy meter with LCD display 230 volts 4 wire system, 10-60 amps, 50 Hz , complete,making , including testing, caliberation & refixing the same complete all as per specified and directed.

Taking down geysers of any make & size from existing position of any height for repair, maintenance and refixing the same after necessary repair complete all as directed. Notes (i) The defective parts to be replaced shall be measured and paid separately under relevant item of Sch . (ii) Cost of minor items i.e. Screws, nut & bolts etc shall be deemed to be included in the above item.

S&F in replacement PVC connection 15 mm bore size with PTMT nuts,rubber washers etc complete of length 450 mm long complete all as per specified and directed.

S&F in replacement geyser element 2.0 KW, ISI marked with gasket, nuts, bolts suitable for the existing triangular/round shape/make of the geyser under repair complete all as per specified and directed.

S&F in replacement geyser element 1.5 KW, ISI marked with gasket, nuts, bolts suitable for the existing triangular/round shape/make of the geyser under repair complete all as per specified and directed.

S&F in replacement thermostat (ISI marked) suitable for existing make of the geyser under repair of cap 50/25 Ltrs complete all as per specified and directed.

S&F in replacement geyser safety valve (pressure release valve) for the exsiting make & capacity of geyser complete all as per specified and directed..

M&L for painting of geysers of any cap 25/50 Ltr with 2 coats of synthetic enamelled paint after scraping the existing old painted surface complete all as per specified and directed.

S&F in replacement shyphon assembly suitable for 25 ltr geysers of any make complete all as per specified and directed..

S&F in replacement inner tank made up of stainless steel conforming to IS suitable for 25 ltr gyser vertical type including rubber gasket complete all as per specified and directed.

S&F in replacement Glass wool filling in between inner tank and outer body of geyser of any make and type complete all as per specified and directed.

S&F in replacement outer body made up of steel duly painted including base cover and indicator assembly suitable for 25 ltr gyser complete all as per specified and directed.

S&F in replacement 3 Core PVC insulated PVC sheathed flexible copper wire multistranded of size 2.5 sqmm complete all as per specified and directed.

Taking down Exhaust Fan of any make & size from existing position of any height for repair, maintenance and refixing the same after necessary repair complete all as directed. Notes (i) The defective parts to be replaced shall be measured and paid separately under relevant item of Sch . (ii) Cost of minor items i.e. Screws, nut & bolts etc shall be deemed to be included in the above item.

S&F in replacement double ball bearing (ISI marked) for exhaust fan of 450mm sweep capacities complete all as per specified and directed..

S&F in replacement double ball bearing (ISI marked) for exhaust fan of 300mm sweep capacities complete all as per specified and directed..

S&F in replacement Gun metal bush for Exhaust fan of any cap/ any size sweep complete all as per specified and directed.

M&L for removing old burnt winding of exhaust fan 450mm sweep motor and rewinding the same with superior quality super enamelled copper wire of suitable size including insulation ,drying after varnishing complete all as per specified and directed.

M&L for removing old burnt winding of exhaust fan 300mm sweep motor and rewinding the same with superior quality super enamelled copper wire of suitable size including insulation ,drying after varnishing complete all as per specified and directed.

S&F in replacement blade suitable for exhuast fan of 450mm sweep of existing make complete all as per specified and directed.

S&F in replacement blade suitable for exhuast fan of 300mm sweep of existing make complete all as per specified and directed.

S&F in replacement louvers shutter suitable for exhuast fan of 450mm sweep of existing make complete all as per specified and directed.

S&F in replacement louvers shutter suitable for exhuast fan of 300mm sweep of existing make complete all as per specified and directed.

S&F in replacement of capacitor 4 mfd ISI marked complete all as per specified and directed.

Taking down ceiling fan of any make & sweep by disconnecting clips,lock nuts etc. from existing position of any height in safe custody for repair & maintenance complete all as per specified and directed. (Note: Repair & Maintainance Shall be paid separately under relevant items.)

Hanging only ceiling fan 1200mm/1400mm sweep after repair & maintenance with existing down rod clips,lock nuts etc. complete all as per specified and directed.

M&L for Painting of ceiling fans complete, in situ/lying in store with synthetic enamel paint (white colour) by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as per specified and directed.

M&L for removing of old burnt winding of fan any type and rewinding the stator with superior quality super enamelled copper wire of suitable size including insulation ,drying after varnishing complete all as per specified and directed.

M& L for repair to ceiling fans of 1200 mm / 1400 mm sweep by replacing unserviceable ball bearing and suitable capacity of condenser including necessary greasing to the bearings complete all as per specified and directed.

S&F in replacement Gun metal bush for ceiling fan 1200mm/1400mm sweep complete all as per specified and directed..

S&F in replacement cup made of plastic complete with nut bolt for fixing in position suitable for ceiling fan 1200mm/1400mm sweep complete all as per specified and directed.

S&F in replacement rubber bush/reel for hanging bracket suitable for ceiling fan 1200mm/1400mm sweep complete all as per specified and directed.

S&F in replacement blade suitable for 1200mm sweep Ceiling fan complete all as per specified and directed..

S&F in replacement blade suitable for 1400mm sweep Ceiling fan complete all as per specified and directed.

S&F in replacement 3 core PVC insulated PVC sheathed flexible copper wire multistranded 1.5sqmm from ceiling rose to fan connector complete all as per specified and directed..

S&F in replacement of capacitor 2.5 mfd ISI marked complete all as per specified and directed..

S&F in replacement of capacitor 3.15 mfd ISI marked complete all as per specified and directed.

M& labour for service wire10 sqmm 2core pvc insulated and pvc sheathested1100 volts grade complete all as per specified and directed.

M& labour for service wire16 sqmm 2core pvc insulated and pvc sheathested1100 volts grade complete all as per specified and directed.

S&F in replacement SMF VRLA 12V ratyed battery maintenance free 24 AH suitable at side with all accessories complete all as per specified and directed.

Supply and refixing PVC Exhaust Fan in replacement for 9 inches 230 volts complete all as specified and directed

Material and labour or repairs to solar water heater system by checking the leakage/sepage of the system if found rectified through the authorized dealers, Draining out the system by opening the cold water outlet and hose to the bottom of soft water, check the corrosion sacrificial anode, replace if found defective clean the collector of capacity 100 LPD complete all as specified and as directed.

Supply and laying in repair copper pipe pipes 20 mm including all fittings on walls/ceiling or laying in floors compete all as specified and directed.

S& F in replacement of Solar Water Heater in and including replacement of solar panel optical reflector (glass type)- 01 Nos for conversion into solar energy to heat energy suitable for 100 ltr capacity including replacement of broken pipes, unserviceable valves complete in all respect to make the solar water heater serviceable and testing in presence all as specified.

S&F replacement of 25 Watt LED Post top lantern made in cast aluminum spigot, spun aluminum power coated top cover aluminum PDC heat sink , Opal PC diffuser and clear acrylic IP 65 protection complete all as specified and directed by Engineer-in-Charge.

M/S V K TRADERS

Malpotra Enterprises

Om Sai Ram Builders

M/S SURINDER KUMAR MAHAJAN

JP AND CO.

KALSI CONSTRUCTION CO

Ashoka Engineers

SATISH AND CO

Standard engineers

G.M. ENGINEERING SERVICES

KULBHUSHAN AGGARWAL

JAI DURGA CONSTRUCTION CO

M/S SHRI RAM BUILDERS