M/T and C/D on Galthan Massu road Km 0/00 to 4/600 (SH Providing and Laying GSB, G-II, G-III and tarring from Km 0/500 to 2/00.

Amount

Providing, laying, spreading and compacting stone aggregate size 90mm to 45mm ( ninety millimeter to forty five millimeter) Grading-I size [100mm (One hundred millimeters) compacted thickness] to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty-Hundred) K.N. static roller in stages to proper grade and camber applying and brooming, stone screening type-A of size 13.2mm ( thirteen point two milimetres) nominal size at the rate of 0.30cum (zero point thirty cubic metres) per ten square metres and binding material at the rate of 0.08 cum ( zero point zero eight cubic metre ) per 10 Sqm ( ten square meter)to fill up the interstices of coarse aggregate, watering and compacting to the required density as per technical specifications clause No. 405 including carriage of materials in all kinds of leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510

SHIV KUMAR

Yashpal

Aman Kumar

Surinder Thakur

KARNAIL SINGH GOVT CONTRACTOR

Subhash Kumar

vinod kumar