General repairs with replacement of defective parts of Snow Clearance machine Guru 1 S no 2994 Snow Cat Farmtrac 1 S no 8911 engaged for Snow Clearance Operation Patnitop Circular Road for the season 2026 27

Snow Clearance machine Guru-1 S.No. 2994 Repairs to the Steering by way replacement of defective steering pump assembly and allied parts by way of P/F of new pump assembly standard make-1 No. as per sample, container-1No., steering tie rod assembly- 1 Set, Universal Coupling-2 No, Spindle pin-2 No., steering Oil (ISO VG 46 hydraulic power steering fluid)-3 L, steering pinion 1 No., cotton cloth - 3 No., diesel for washing- 3 L The Job includes cost of material, labour charges and includes all taxes. The job also includes dismantling all damaged/worn out parts, checking and testing of parts, P/F of new parts and assembling, fitting, testing. The job includes cost of material and labour charges (Complete job).

Snow Clearance machine Guru-1 S.No. 2994 Periodic oil service of the machine by draining the old one and then P/F of new M.oil -15 litres, Engine oil filter-01 no., Diesel filter (Pry. And Sec.)-01set. The job also includes repairs to Fuel Injection Pump by complete over hauling of parts such as Nozzles and Holder assembly, Elements, Delivery Valve Set, Seal Rings, Washers, Plungers, Oil seals, Coupling, Gaskets, Springs, Shim Set, FIP repair kit, Feed Pump -01no, calibration of pump and adjustment of nozzles etc. Complete in place of worn-out parts and Testing. Complete job including cost of material, labourcharges , tools and tackles required to execute the job.

Snow Clearance machine Guru-1 S.No. 2994 Replacement of damaged hydraulic pipes of the machine by way of removal of old damaged ones and then P/F of new hydraulic pipes of required length and specification with new ones along with seals of the blade jacks, Hose adaptors, O-rings etc. The job also includes topping up of hydraulic oil (ISO VG 32)– 15 ltrs and then testing the hydraulic system on load for any leakages. Complete job including cost of material, labour charges, tools and tackles required to execute the job.

Snow Clearance machine Guru-1 S.No. 2994 Repairs to Radiator of machine by way of dismantling of Radiator from chassis, cleaning of choked tubes with caustic soda, soldering of damaged pipes, cleaning of top & bottom tanks including soldering to damaged portion and refitting of same on chassis. The job includes P/F of its accessories such as hose pipe set with clamps, coolant- 06 ltrs, testing of leakage also replacement of water body of the engine along with Fan belt. Complete job including cost of material & labour charges to execute the job.

Snow Clearance machine Guru-1 S.No. 2994 Repairs of the Electrical system of the machine by complete checking and replacing the damaged wiring, P/F of fused bulbs, assorted size L.T.wires, cabin lights, side indicators, front-head lights with bulbs, holders, side indicators. Also dismantling of Alternator assy, cleaning it with petrol and waste cloth, P/F of new armature, carbon brush set, bush set, spring-set. Also P/F of tail light assys, T-horn, etc. Complete job including cost of material and labour charges.

Snow Clearance machine Guru-1 S.No. 2994 Repairs to clutch system by way of dismantling of clutch system and P/F of defective/ worn out parts i.e. clutch plate (Single Plate Dry Friction Clutch) -1 no, pressure plate -01 no, assy. clutch release bearing -01 no, assy. clutch release fork -01 no, clutch back plate-01 no, clutch paddle bush -01 no,. Refill the clutch master cylinder fluid reservoir with DOT 4 fluid. (Complete Job)

Snow Clearance machine Guru-1 S.No. 2994 Repairs to Rear Suspension i.e. Heavy-Duty Semi-Elliptic Multi-Leaf Springs paired with Double-Acting Telescopic Shock Absorbers by way of supporting the frame on heavy-duty jack stands, allowing rear rigid live axles to hang freely, inspect for broken main leaves, flattened camber height, worn rubber/bronze spring eye bushes, loose U-bolts, and leaking shock absorber seals. Unbolt the upper and lower mounting eye-bolts of the double-acting telescopic shock absorbers, replace deteriorated mounting rubber grommets/bushings. The job includes overhaul of Leaf Springs by way of supporting the axle with a hydraulic jack before unbolting the U-bolts, remove the shackle pins, center bolts, and spring eye pins, dismantle individual leaves to clean rust and scale; replace cracked or sagging individual leaves, re-camber leaf packs, apply graphite grease between non-parabolic leaves during reassembly to minimize inter-leaf friction and noise, install new bushes using a hydraulic bench press, clean shackle pins and grease channels; replace grooved or pitted pins, re-mount leaf packs and align center bolts with the axle seats, install new U-bolts, reconnect anti-roll/stabilizer bar link mounts (if equipped) with new rubber bushes. (Complete Job).

Snow Cat Farmtrac-1 S.No. 8911 Repairs to Radiator of machine by way of dismantling of Radiator from chassis, cleaning of choked tubes with caustic soda, soldering of damaged pipes, cleaning of top & bottom tanks including soldering to damaged portion and refitting of same on chassis. The job includes P/F of its accessories such as hose pipe set with clamps, coolant- 06 ltrs, testing of leakage also replacement of water body of the engine along with Fan belt. Complete job including cost of material & labour charges to execute the job.

Snow Cat Farmtrac-1 S.No. 8911 Repairs of the Electrical system of the machine by complete checking and replacing the damaged wiring, P/F of fused bulbs, assorted size L.T.wires, cabin lights, side indicators, front-head lights with bulbs, holders, side indicators. Also dismantling of Alternator assy, cleaning it with petrol and waste cloth, P/F of new armature, carbon brush set, bush set, spring-set. Also P/F of tail light assys, T-horn, etc. Complete job including cost of material and labour charges.

Snow Cat Farmtrac-1 S.No. 8911 Periodic oil service of the machine by draining the old one and then P/F of new M.oil -15 litres, Engine oil filter-01 no., Diesel filter (Pry. And Sec. )-01set. The job also includes repairs to Fuel Injection Pump by complete over hauling of parts such as Nozzles and Holder assembly, Elements, Delivery Valve Set, Seal Rings, Washers, Plungers, Oil seals, Coupling, Gaskets, Springs, Shim Set, FIP repair kit, Feed Pump -01no, calibration of pump and adjustment of nozzles etc. Complete in place of worn-out parts and Testing. Complete job including cost of material, labourcharges , tools and tackles required to execute the job.