Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹7.1 LAccepted-AOC NEAR MPEB OFFICE DHANA DISTT SAUGOR MP 470228 | DHANA | SAUGOR | MP | 470228 | 1 | Accepted-AOC LOWEST BIDDER | |
| 2 | 2₹8.5 L+₹1.4 L (20.0%)Rejected-Finance NEAR SVN UNIVERSITY NARSINGHPUR ROAD SIRONJA SAUGOR MP 470228 | SAUGOR | SAGAR | MP | 470228 | 2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | 3₹8.9 L+₹1.8 L (24.7%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹9.7 L
EMD Value
₹19,400
Closing Date
4 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Manash Kumar Das AE Civil
AGE I DHANA PIN 470228, DIST SAGAR, MP
PROVN OF 01 X ADDN ROOM IN ETE-10 OF NCO ACADEMY AT DHANA MIL STN.
2023_MES_621538_1
8300/DH/61/E8
Open Tender
Civil Works
Item Rate
180 days
AGE I Dhana
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Assistant Garrison Engineer (I) Dhana
₹19,400
Yes
28 Feb 2024
9 Oct 2023
6 Nov 2023
9 Oct 2023
4 Nov 2023
23 Oct 2023
Amount
Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. or for cable laying or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in hard/ dense soil, complete all as specified and as directed.
M & L for PCC 1:4:8 type D-2 (with using 40mm graded crushed stone aggregate) in foundation filling and mass concrete, complete all as specified and directed.
Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level n exc. 1.5 m above the starting point
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose/ hard/ dense soil , complete all as specified and as directed..
M & L for 10mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M & L for 5mm and over upto and including 10mm dia TMT bar in stirrups spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces, complete all as specified and as directed.
Formwork to sides of pillars,posts, struts,piers, columns and stanchions for fair finished surface, complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface, complete all as specified and directed.
Formwork to chullah hoods, chajjas, troughs and similar items including edges for fair finished surface, complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface, complete all as specified and directed.
M & L for RCC M25 (Design Mix) using 20 mm nominal size graded crushed stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.
M & L for RCC M25 (Design Mix) using 20 mm nominal size graded crushed stone aggregate as in Columns, pillars, piers,posts and struts, complete all as specified and directed..
M & L for RCC M25 (Design Mix) using 20 mm nominal size graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span, complete all as specified and as directed.
M & L for RCC M25 (Design Mix) using 20 mm nominal size graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
M & L for RCC M25 (Design Mix) using 20 mm nominal size graded crushed stone aggregate as in chhajja, complete all as specified and directed.
Material & Labour for cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.
Material & Labour for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement Mortar 1:6, complete all as specified and directed.
Material & Labour for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:4, complete all as specified and as directed.
Material & Labour for Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished even and smooth (without using extra cement), complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces using integral water proofing compound 3% by weight of cement and finishing the surface even and smooth without using extra cement, complete all as directed and directed. Note:- WPC shall be measured and paid saperately.
Supply only integral water proofing compound, complete all as specified & directed.
Material and labour for plastering 5 mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished even and smooth without using extra cement, complete all as specified and as directed.
M&L for preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash, complete all as specified and directed.
M&L for two coats of oil bound distemper including preparation of newly plastered wall surface over 1.50 mm thick wall care putty etc, complete all as specified and directed.
M&L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm, complete all as specified and as directed.
M & L for preparing new plaster surfaces walls including chajjas, facias etc. and applying two coat of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures, complete all as specified and as directed.
S&F pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.25 mm thickness, size 125 mm X 60 mm, Profile D, single or double rebate including hinges, mortar guards, lock strike plate, shock absorbers, complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed.
S&F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, with decorative face veneers on both faces with lipping to match, complete all as specified and as directed.
S&F 2nd class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed.
S&F galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.8mm and fixed with tinned tacks or galvanized wire staples or wooden bead, complete all as specified and directed.
M&L for preparation new or prevously untreated surfaces of wood and wood based material of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.
S&F MS butt hinges of 100 mm size cold rolled mild steel medium weight, ISI marked, complete all as specified and directed.
Supply and fixing 200mm size mild steel barrel tower bolt stone enamelled black with bright bolt ISI marked, complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.
S&F 300mm mild steel, ordinary rat tail rod pattern springs, including roller and roller plate, complete all as specified and as directed.
Supply and fixing 150mm size Extruded aluminium alloy handles, fabricated type anodised, complete all as specified and directed.
Supply and fixing Aluminum (Die cast body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.
S&F 25mm dia stainless steel curtin rod (Poles, finials , ring & bracket) etc, complete as specified and directed.
M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete as specified and directed.
M & L for 100mm thick cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate in floor sub base, complete as specified and directed.
M&L for 25 mm thick cement concrete in flooring type B1, 1:2:4 (Using 20 mm graded crushed stone aggregate) screed bed below floor tile, complete as specified and directed.
M&L for Non-skid ceramic colour tiles 7 to 8 mm thick, (square/ rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4, complete all as specified and as directed.
M&L for Glazed ceramic colour tiles of size 300 x 450 x7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4, complete as specified and directed.
M&L for Granite (of any type) tiles 20mm thick machine cut, in, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing including 15 mm thick screed bed in cement sand mortar 1:4, complete all as specifed and directed by EIC.
Material & labour for rendering 15 mm thick in cement mortar 1:4 over RCC Roof mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction, complete as specified and directed. Note:- Water proofing compound shall be measured and paid separately as supply only.
Supplying & fixing to walls and ceilings or laid in floors 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011, complete all as specified and as directed.
Supplying & fixing to walls and ceilings or laid in floors 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
M & L for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.
Supply and fix Angle stop valve cast copper alloy, with fancy type chromium plated capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete, all as specified.
Supply and fix PVC SWR Nahani/ Floor trap plain with grating including jointing with solvent cement, dia of outlet 75 mm, water seal minimum 50 mm complete all as specified and as directed.
S & F high density polyethylene pipe (HDPE) of pressure rating PN 6(0.6 Mpa), material grade PE 63 and nominal dia 40 mm including all fittings and fixtures fixed to walls ceiling or in floors, complete all as specified and as directed.
S&F PVC grating 100 mm dia with/without hole for waste pipe and fixed to floortrap/nahani trap in CM 1:6, complete all as specified and directed. Make :-Prayag or equivalent as approved by the Engr in charge.
Material & labour for DWCPE (SN8) 180 (OD)/163(ID) mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional, complete all as specified and directed.
S&F vitreous China, single piece-WC with UF soft close seat cover, Fixing accessories set and accessories set, Cistern fittings, trap etc complete all as specified and directed. Make : Parryware Model No C8854 SP 180 or equivalent as approved by the Engr in charge.
S&F vitreous China table top basin of size 593 x370x 120 mm of in Ceracolour white or Ivory complete with connecting all fitment including CP waste coupling ,waste pipe etc complete all as specified and directed. Make: Parryware Cat No- C894C or equivalent as approved by the Engr in charge.
S&F chromium plated towel rack 600mm long with lower hangers complete all as specified and directedM Make: Parrywar Cat no T6008A1 or equivalent as approved by the Engr in charge.
S&F soap dispenser with glass bottle chromium plated brass complete all as specified and directed. Make: Parryware T6003A1 or equivalent as approved by the Engr in charge.
S&F wall mixture 3-in-1with bend pipe for over head shower chromium plated ,cast copper alloy complete all as specified and directed. Make:-Parryware cat Part No. G272FA1 or equivalent as approved by the Engr in charge.
S&F Chromium plated corner glass shelf with bracket and 6.3 mm sheet glass with CP brass railing including circular cutting, grinding polishing & rounding edges of glass etc. complete all as specified and directed Make : Parryware Cat No T6010A1 or equivalent as approved by the Engr in charge.
S&F central hole basin mixer chromium plated 15mm dia as in wash basin (fancy type ), complete all as specified and directed. Make:- Parryware cat Part No. G2365A1 or equivalent as approved by the Engr in charge.
S&F choromium plated brass over head shower 250 x170 x15 mm with arm complete all as specified and directed. Make: Parryware cat Part No T9839A1 or equivalent as approved by the Engr in charge.
M&L for point wiring with 1.5 Sqmm (nominal area) single core PVC insulated 1100 Volts, grade multi stranded (FR-LSH) copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type cast iron or pressed steel terminal box for mounting of modular switches, sockets, fan regulator etc with modular white cover plate with frame for suitable module as per site requirements and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth including cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings of following, complete all as specified and directed:- (Note: Cost of cutting chase and making good shall be included in the quoted rate.)
One light point or one fan point controlled by one way, one switch, SP 230 Volts
One 3/5 pin 5 Amp socket outlet point controlled by one way, one switch,SP on same board.
One 3/5 pin 5 Amp socket outlet point controlled by one way, one switch, SP on independent board.
One 5 pin, 15 amps socket controlled by Independent 15 Amps switch but with cable 2.5 sqmm.
S & F modular switch 1 way 16 Amp, 1 module, complete all as specified and directed.
S&F modular socket 6 Amp/16 Amp, 2/3 pin combined, 2 module, complete all as specified and directed.
S&F modular switch 6 Amp/10 Amp, 2/3 pin combined, 1 module, complete all as specified and directed.
S&F modular socket 6 Amp, 2/3 pin combined 2 module, complete all as specified and directed.
S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 m, complete all as specified and directed
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed
M&L for ceiling rose, 3 pin surface, white /any shade , three terminal, complete all as specified and directed
S&F Cool white LED bathroom mirror light, 12 Watt, AC single phase, complete all as specified and directed
S&F LED focus light, 18 Watt, AC single phase, 220V, complete all as specified and directed
S&F LED wall light , 8 Watt, AC single phase, 220V, complete all as specified and directed. Make: Cat part No.16460 of phillips or equivalent as approved by the Engineer in charge.
S&F LED wall light , 15 Watt, AC single phase, 220V for bathroom wall, complete all as specified and directed. Make: Cat part No.58157 of phillips or equivalent as approved by the Engineer in charge.
Supply and fixing 25 watts LED building security light fitting including suitable bracket and nut bolts etc, complete all as specified and directed
S&F round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed
S&F sheet metal enclosure with socket plug top and MCBs single pole and neutral 240 V, 40 Amps enclosure with a two pin and earth plug, and socket complete with single pole MCB, complete all as specified and directed by Engr-in-Charge.
M&L for concealed submain wiring with two run of 6.00 sqmm single core multi stranded ISI marked PVC (FRLS) insulated copper conductor cable drawn through concealed in surface in PVC rigid conduits and the conduit accessories not less than 25mm including one run of earth continuity conductor with 6.00sqmm multi stranded copper conductor including cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings, complete all as specified and directed by Engineer-in-charge. Note:- 1. Two run of single core cable, one run of earth continuity conductor and one meter of conduit shall be measured as one unit. 2. Cost of cutting chase and making good shall be included in the quoted rate.
S&F MCB distribution board steel sheet, enclosures power coatad fitted with bus bar, neutral link, earth bar din rail conforms IS-8822:96 and EIC 898-96,240 volts double door, complete all as specified and directed:-
04 way, 415 Volts, TPN
08 way, 240Volts with 200 amps tinned copper bus bar
S&F MCB in DB's/ Isolator of the following rating, complete all as specified and directed :-
Isolator four pole, 40 Amps 415 V
S&F in repair isolator SPN 40 A 240V, complete all as specified and directed
S&F SP 6-32 Amps, curve 'C' breaking capacity 10KA, complete all as specified and directed
Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6 mm buried directly in ground vertically in pit of depth not less than 2.25 meter below normal ground level with top edge of the earth plate at a depth not less than 1.5 meter below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron wire 4 mm dia by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore dia (light grade) connected to main switch board all as shown in electrical plate No.3 of SSR-1991 Part I and including necessary excavation and earth work, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC type C-1 chamber, CI cover and MS frame etc., complete all as specified. Note: The unit rate includes earth wire and protection pipe up to (maximum 7.5 metre from earth plate) earth point/ test point, complete all as specified and directed
Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 4 core with nominal cross sectional area of main conductor 16 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc, complete all as specified and as directed.
M&L for old size sub class 'B' bricks straight or curved on plan exc. 6 meter mean radius for cable cover, complete all as specified and as directed.
M&L dry sand cushioning to UG cable with a layer of sand of 8 cm thick before laying of cable and 15 cm thick aftr laying of cable to full width of trenches, complete all as specified and as directed. Note:- For the purpose of payment only punned thickness will be measured.
S&F light grade 40mm GI pipe fix complete to wall, poles etc with suitable clamp for protection of cable, complete all as specified and as directed.
Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 40 mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., and laid in trenches/surfaces/walls, complete all as specified and as directed.
Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre deep for laying water main pipe/ cables etc., getting out and forming bottom surface to required gradient, complete all as specified and as directed.
S&F PPR Gate Valves (Brass Insert) of 25 mm bore, complete all as specified and as directed.
M & L for cutting in position / existing GI pipe line 25 mm dia & insertion of new GI Tee of suitable size for making pipe connection, complete all as specified and directed.
S&F rotational moulded polyethylene tripple layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 25mm/20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes, complete all as specified and as directed.
M/S JAINENDRA KUMAR JAIN
d k suppliar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .